Profile PCF-300 Manual


Læs nedenfor 📖 manual på dansk for Profile PCF-300 (2 sider) i kategorien Smart hjem. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
3 Remotely controlled electric sockets EN - 1
PCF-300/PCF-310
We thank you for the purchase of this Profile product.
Note: It is important that you read this manual carefully
before using the product and be sure to save this manual
for possible use later.
Modern electrical installations are increasingly based on
the use of wireless control systems based upon RF
technology (Radio Frequency) and make efficient
management of all kinds of systems and devices possible
in the home. These modern systems provide for
improved protection of privacy and enhanced user-
friendliness. They perfectly combine safety and power
saving.
Setting up the remote control channel:
Setting up the main channel
1. Remove the cover from the base of the remote
control and fit the battery.
2. Adjust the channel selector as required to another
position
3. Replace the base cover
Setting up the main channel and receiver channel
Setting up the channel for receivers (electric sockets)
1. Undo the top cover on the rear of the electric sockets
using a screwdriver.
2. You will see 10 dip switches:
the first 5 are for the main channel: from 1 to 5
the last 5 are for the receiver channel: from A to E
3. Set the first 5 switches in exactly the same way with
the switches set to remote control e.g. 1 pointing up
and 2, 3, 4, 5 pointing down
4. Set the next 5 switches according to the required
ON/OFF switch on switch control A
The red LED on the receiver illuminates when you
send an ON signal to the receivers. The red LED is
also a control instrument to see whether you have
properly fitted the receivers in the electric socket.
Conversely, when you send an OFF signal to the
receivers, the red LED will go out, and the connected
device will switch off.
Practical example
Remote control
1 2 3 4 5
Socket 1 (button on/off A)
1 2 3 4 5 A B C D E
Main channel Receiver channel
Socket 2 (button on/off B)
1 2 3 4 5 A B C D E
Main channel Receiver channel
Socket 3 (button on/off C)
1 2 3 4 5 A B C D E
Main channel Receiver channel
Socket 5 (extra socket: PCF-310)
(=button on/off D)
1 2 3 4 5 A B C D E
Main channel Receiver channel


Produkt Specifikationer

Mærke: Profile
Kategori: Smart hjem
Model: PCF-300

Har du brug for hjælp?

Hvis du har brug for hjælp til Profile PCF-300 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Smart hjem Profile Manualer

Smart hjem Manualer

Nyeste Smart hjem Manualer