Profoto RFi Softbox Octa Manual

Profoto Ikke kategoriseret RFi Softbox Octa

Læs nedenfor 📖 manual på dansk for Profoto RFi Softbox Octa (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
HOW TO
MOUNT YOUR
RFi SOFTBOX
RFi SOFTBOX
MOUNTING INSTRUCTION
1. Position the rounded rod end into the loops.
Color markings on the rod end should be
towards center.
4. Align the rods with the holes by slightly
bending the rods. By slightly bending the
opposite rod against your leg or the floor
the tension on the softbox will decrease and
mounting gets easier. Repeat the procedure
when disassembling the softbox.
7. Tighten the diffuser all around to prevent
leakage. Mount the outer diffuser close to the
silver side and not to the softbox outer edge.
The softbox is now ready to use. Now mount
it on your Profoto flash.
3. Check the color of the dot on the rods of your
softbox, e.g. if theres a blue dot you match it
with the blue dots on your RFi Speedring.
6. Attach and stretch the inner diffuser with
the Velcro attachment.
2. Press the rod fully into the corner pocket.
The rod should stay in the pocket even when
disassembling the softbox.
5. Tighten the softbox fabric with the Velcro to
prevent light from leaking out.
Octa
Strip
Square
Rectangular


Produkt Specifikationer

Mærke: Profoto
Kategori: Ikke kategoriseret
Model: RFi Softbox Octa

Har du brug for hjælp?

Hvis du har brug for hjælp til Profoto RFi Softbox Octa stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Profoto Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer