Projecta VSR100K Manual


Læs nedenfor 📖 manual på dansk for Projecta VSR100K (4 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 37 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
TESTING FOR NORMAL OPERATION
1. With the ignition set to ‘ACC’ (Accessories) or ‘OFF’ and the override switch set to ‘OFF’, the ‘Engaged
LED should be off.
2. Start the vehicle’s engine. Once the starting battery reaches 13.4V the VSR will activate and the ‘Engaged
LED will illuminate. If the LED does not illuminate within a few seconds, increase the engine RPM to a fast
idle allowing the alternator to generate more current to charge the starting battery.
3. Once the LED illuminates, turn the engine ‘Off’ and switch the headlights and other accessories ‘On’.
When the starting battery voltage falls below 12.8V, the LED will turn off and the VSR will disconnect the
auxiliary load.
TESTING OVERRIDE:
Turn the ignition to ‘ON’ and then switch the rocker switch to ‘ON’. The LED in the switch should
illuminate along with the VSR ‘Engaged’ LED, indicating the connection of both batteries in parallel.
Distributed by
AUSTRALIA
Brown & Watson International Pty Ltd
Knoxfield, Victoria 3180
Telephone (03) 9730 6000
Facsimile (03) 9730 6050
National Toll Free 1800 113 443
NEW ZEALAND
Narva New Zealand Ltd
22–24 Olive Road
PO Box 12556 Penrose
Auckland, New Zealand
Telephone (09) 525 4575
Facsimile (09) 579 1192
IS122
Issue 1: 14.10.10
12 VOLT 100 AMP VSR
DUAL BATTERY SYSTEM
P/No.s VSR100K
SPECIFICATIONS
P/No. VSR100
VOLTAGE 12V
CHARGING CURRENT 100A Continuous
200A Peak
CUT IN VOLTAGE 13.4V
CUT OUT VOLTAGE 12.8V
CUT OUT DELAY 8 sec.
CHARGE TYPE Parallel
CONTROL MCU
MOUNTING Surface/Firewall
CURRENT DRAW Charging 550mA
(standby 10mA)
VOLTAGE DROP None
SURGE PROTECTION Built-in
ENVIRONMENTAL POTECTION IP66
OVERRIDE Requires minimum 10V
RECOMMENDED FUSE 150A
MIN CABLE SIZE 14mm2 (6 B&S)
TORQUE SETTINGS 3.75Lb/ft, 5Nm
WARRANTY
Projecta products are covered by a 12 month
warranty. Failure to follow the operating
instructions may damage the product and
will void warranty. Please read these operating
instructions carefully before use. For a warranty
claim please return unit to the place of purchase
with your sales receipt as proof of purchase date.


Produkt Specifikationer

Mærke: Projecta
Kategori: Ikke kategoriseret
Model: VSR100K

Har du brug for hjælp?

Hvis du har brug for hjælp til Projecta VSR100K stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Projecta Manualer

Projecta

Projecta SC015 Manual

2 Oktober 2024
Projecta

Projecta HDBT200 Manual

11 August 2024
Projecta

Projecta SC320D Manual

7 August 2024
Projecta

Projecta VR020 Manual

6 August 2024
Projecta

Projecta LVD30 Manual

3 August 2024
Projecta

Projecta HDBT252 Manual

3 August 2024
Projecta

Projecta DBC150 Manual

31 Juli 2024
Projecta

Projecta VSR100 Manual

30 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Snom

Snom HD300A Manual

4 November 2024
Atlona

Atlona NETGEAR-AXM Manual

4 November 2024
Sanus

Sanus VMF822 Manual

4 November 2024
Sanus

Sanus VLF828 Manual

4 November 2024
Sanus

Sanus VSF817 Manual

4 November 2024
BEKO

BEKO BHCP65422BCH Manual

4 November 2024
Blaupunkt

Blaupunkt GG3010 Manual

4 November 2024
Blaupunkt

Blaupunkt BP-YF07D Manual

4 November 2024
Blaupunkt

Blaupunkt GG6010 Manual

4 November 2024