Proteus ISS-500 Manual


Læs nedenfor 📖 manual på dansk for Proteus ISS-500 (12 sider) i kategorien motionscykel. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/12
Computer Manual - Proteus ISS-500
KEY GUIDE:
MODE 1. Select function and display on the screen during exercise.
Scan – Time – Calorie – RPM – Count.
2. Press this button to confirm the setting values of time, calorie and count.
3. Hold two seconds to reset all of values to zero.
UP Increase the setting value of the following functions.
Time – Calorie – Pulse – Count.
DOWN Decrease the setting value of the following functions.
Time – Calorie – Pulse Count.
ENTER 1. Press this button to enter setting mode.
2. Select function to be preset.
Time – Calorie – Pulse – Count.
3. Press this button to confirm the setting values of pulse.
BATTERY REPLACEMENT:
1. Please install 2 pcs AA or UM-3 batteries in the battery case on the back of monitor.
2. Ensure that the batteries are correctly fitted. Battery must be correctly positioned and make sure the battery
spring is properly contacted with battery.
3. Should the displays appear blank or display only partial segments remove the batteries, wait 15 seconds, and
then replace again.
4. Whenever remove batteries, all the functional values will be to zero.


Produkt Specifikationer

Mærke: Proteus
Kategori: motionscykel
Model: ISS-500

Har du brug for hjælp?

Hvis du har brug for hjælp til Proteus ISS-500 stil et spørgsmål nedenfor, og andre brugere vil svare dig




motionscykel Proteus Manualer

motionscykel Manualer

Nyeste motionscykel Manualer