Pyle PHRM84 Manual

Pyle Sportsur PHRM84

Læs nedenfor 📖 manual på dansk for Pyle PHRM84 (1 sider) i kategorien Sportsur. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

SPEED & DISTANCE MONITOR

This unit is operated by four keys:

MODE / SET

NEXT / SAVE / -

START / STOP /+

RESET / EL

RESET/EL

MODE/SET

ST T +ART/S OP/

NEXT/S VE/A -

FEATURES:

Time & Date

Daily Alarm

Dual Purpose 3D sensor (Walking or Running)

Intelligent Step Filter Function

Chronograph with 15 Memory Records

Target Time Alert Alarm

Target Speed Alert Alarm

Target Distance

Interval Distance

Average Speed

Total Distance

Total Calorie Burnt

Total Fat Burnt

Calibration Function

Memory Data Recall

EL Backlight

Chime

Key tone

User Setting

Energy Saving Function

3D SENSOR FROM USA - MEASURES YOUR MOVEMENT ACCURATELY

- The 3D technology in the accelerator is an accelerometer sensor that detects and

measures acceleration in walking or running.

- 3D Sensor has intelligent step filter function-steps which only starts counting when

the unit detects continuous movement for over 10 seconds.

- 3D Sensor allows users to customize to their specific body type for Walking/Running

style.

PERSONAL TRAINER

Thank you for choosing Pyle as your personal traine r. In order to make the best us e

of this device, please read the instruction manual carefull y. eDo not discard keep th

manual for future reference.

Important:

Please note that the watch is NOT a medical device and is not to be used

as such.

CONTENTS

Getting Start ...........................................................................................................

Using the watch function ........................................................................................

Symbol on LCD ......................................................................................................

Mode Flow Chart ....................................................................................................

Time/Date Settin .....................................................................................................

Alarm Mode ............................................................................................................

Alarm Setting ..........................................................................................................

Chronograph Mode ...............................................................................................

Target Time / Distance / Interval Distance & Speed Setting Mode .........................

Memory Recall Mode .............................................................................................

Calibration Mode ....................................................................................................

Calibration Setting Mode ........................................................................................

User Setting Mode .................................................................................................

Installing the Batter .................................................................................................

Specification ...........................................................................................................

Caution ...................................................................................................................

USING THE WATCH FUNCTIONS

IMPORTANT!

- Before the unit is transported, the watch is switched off for energy saving purposes.

User will need to turn it on by pressing the MODE key when they have purchased

the product.

- Again for energy saving purposes, the watch unit will automatically switch off tat midnigh

every night. To turn it on again, press the MODE key.

WALKING AND RUNNING MODE

- There are two-step counting features, one is for the walking mode and the other is

running mode. For each mode, calibration of stride length is required for both.

- T h may take a t of time fore it a to s se t t y are k or r .he watc bi be st rts en ha ou wal ing unning

During that time, it will not display a step count. It will display your entire step count

from the beginning of your walk/run, including the steps you took while the watch was

not displaying a step count.

NOTE

- t t ty f 1 te, it t t t to If here is no ac ivi in any mode or around minu will au oma ically re urn

time mode.

- w fi i l i r If you ish to have the most accurate tness ndex ca culated by the un t, the use

mus use he calibra ion ea ure or bo walking and runnin hey will also neet t t f t f th g. T d

to input their personal user settings.

In order to maximize the accuracy of the step counting feature of the watch, please

wear the watch properly as shown in the diagram (strap of the watch must fasten tightl y

around the wrist and it must not be loose; display must also be perpendicular to the

forearm and wrist; the watch must only be worn on the left wrist and not the right to

maximize the accuracy of step counting) as the design and accuracy of the watch for

step counting is based on the positioning of the watch. By wear ng i the watch correctl y,

the steps counted during the walk or run will be more accurate.

SYMBOL ON LCD

- Chime

KM - Kilometers

gFAT - Unit of Fat Burnt

KM/h - Kilometers per hour

STEP - Step you have walked or ran

Kcal - Unit of Calories Burnt

- Key Tone

RUN - Run mode

WALK - Walk mode

AM - Time from 0:00.00 to 11:59.59

PM - Time from12:00.00 to 23:59.59

- Alarm

MODE FLOW CHART

TIME/DATE MODE - ALARM MODE - CHRONORAPH MODE - DATA RECORD

MODE - CALIBRATION MODE - USER SETTING MODE

TIME AND DATE SETTING MODE

1. Press the MODE button until you have reached the clock

mode displaying the time & date.

2. Press and hold the MODE key for 3 seconds and the

seconds' digits should flash.

3. Press MODE to set the minute.

4. To increment the value, press the START/STOP/+ button or

hold the START/STOP/+ button until you have reached your

desired minute. To decrement the value, press the

NEXT/SAVE/- button or hold the NEXT/SAVE/- button until

you have reached your desired minute

5. Press MODE key for confirmation and continue to set the hour.

6. To increment the value, press the START/STOP/+ button or hold the START/STOP/+

button until you have reached your desired hour. To decrement the value, press the

NEXT/SAVE/- button or hold the NEXT/SAVE/- button until you have reached your

desired hour.

7. Press MODE key for confirmation and continue to set the date.

8. To increment the value, press the START/STOP/+ button or hold the START/STOP/+

button until you have reached your desired date. To decrement the value, press the

NEXT/SAVE/- button or hold the NEXT/SAVE/- button until you have reached your

desired date

9. Press MODE key for confirmation and continue to set the month.

10. To increment the value, press the STAR T T/S OP/+ button or hold the STAR T +T/S OP/

button until you have reached your desired month. To decrement the value, press

the NEXT/SAVE/- button or hold the NEXT/SAVE/- button until you have reached

your desired month

11. Press MODE key for confirmation and continue to set the year.

12. To increment the value, press the STAR T T/S OP/+ button or hold the STAR T +T/S OP/

button until you have reached your desired year or to decrement the value, press

the NEXT/SAVE/- button or hold the NEXT/SAVE/- button until you have reached

your desired year

13. Press MODE key to confirm and select the 12 hour or 24 hour format. Do this by

pressing the START/STOP/+ or NEXT/SAVE/- button to toggle between the two

options.

14. To exit settings, press and hold the MODE button or alternatively, do not press or

hold any buttons for 60 seconds and the unit will return to Time/Date mode.

Note : At anytime to exit the time and date setting mode, press and hold MODE button

for 3 seconds and all revised setting will be kept after exit.

ALARM MODE

1. Press the MODE button until you have reached the alarm

mode.

2. To turn the alarm on or off, press the START/STOP/+ or

NEXT/SAVE/- button to toggle between the two options.

Note: To exit the alarm mode and return to the default time

mode, press the MODE button until you have reached the

time mode which should display time. No button pressed or

held for 60 seconds will automatically trigger the unit to

return to Time/Date mode.

SETTING THE ALARM

1. Press the MODE button until you have reached the alarm

mode.

2. Press and hold the MODE button to enter into alarm setting

mode and the minutes' digits should start flashing.

3. Press or hold the START/STOP/+ button to increment the

minutes' value until you have reached your desired minute.

Alternatively, press or hold the NEXT/SAVE/- button to

decrement the value until you have reached your desired

minute.

4. Press the MODE button to confirm and continue to set the

hour's digits.

5. Press or hold the STAR T T/S OP/+ button to increment the minutes' value until you hav e

reached your desired minute. Alternatively, press or hold the NEXT/SAVE/- button to

decrement the value until you have reached your desired minute.

6. Press and hold the MODE button for confirmation.

Note:

- Any changes made in the alarm mode will automatically enable the alarm.

- To exit the alarm mode and return to the default time mode, press the MODE button

until you have reached the time mode which should display time. No buttons pressed

or held for 60 seconds will automatically trigger the unit to return to Time/Date mode.

CHRONOGRAPH MODE

1. Press the MODE key until you have reached the

chronograph mode.

2. Press NEXT/SAVE/- button to select RUN or WALK

3. Press the START/STOP/+ button to start and press

again to stop the chronograph.

Note:

- To exit the alarm mode and return to the default time mode,

press the MODE button until you have reached the time

mode which should display time. No buttons pressed or

held for 60 seconds will automatically trigger the unit to

return to Time/Date mode.

Stop Mode

1. Press the STAR TT/S OP/+ button to stop the chronograph mode .

2. You may scroll through the data being measured: Speed,

Distance, Steps, Calories and Fat Burnt by pressing the

NEXT/SAVE/- button.

3. Press & hold the NEXT/SAVE/- button for 3 seconds to save

the record

4. Press the START/STOP/+ or NEXT/SAVE/- button to select

YES or NO.

5. Press & hold the NEXT/SAVE/- button to confirm your setting

and back to Chronograph Mode.

Note:

- To exit the alarm mode and return to the default time mode,

press the MODE button until you have reached the time

mode which should display time. No buttons pressed or held

for 60 seconds will automatically trigger the unit to return to

Time/Date mode.

Start Mode

1. Press the START/STOP/+ button to start the chronograph mode.

During the exercise session, you may scroll through the data being measured: Speed ,

Distance, Steps, Calories and Fat Burnt by pressing the NEXT/SAVE/- button.

TARGET TIME/DISTANCE/INTERVAL DISTANCE & SPEED SETTING MODE

Target Time:

1. Press the MODE button until you have reached the chronograph mode.

Press and hold the MODE button for 3 seconds to enter the Target Time setting

mode. (Press mode again to select Target Speed, Target Distance & Interval Time

Setting ). The chronograph must be reset to 0 before the setting mode can be

accessed.

2. To Tturn the arget ime T on or f, press the of STAR T T/S OP/+ or NEXT/SAVE/- butto n

to toggle between the two options.

3. Press Mode to confirm ON or OFF for Target Time. If Target Time is off, the watch

will skip to setting the Target Distance.

4. Increment or decrement target second by pressing or holding the START/STOP/+

or NEXT/SAVE/- button.

5. Press the Mode button for confirmation and set the target minute.

6. Increment or decrement the target minute by pressing or hold ing the STAR TT/S OP/+

or NEXT/SAVE/- button.

7. Press the Mode button for confirmation and set the target hour.

8. Increment or decrement the target hour by pressing or holding the START/STOP/+

or NEXT/SAVE/- button.

9. Confirm the target hour by pressing the MODE button then con tinue to set the Target

Distance.

10. Any changes made in the Target Time Mode will automatically enable the Target

Time function.

Target Distance:

1. After Target Time is set, Target Distance can be activated or deactivated.

2. To turn the Target Distance on or off, press the START/STOP/+ or NEXT/SAVE/-

button to toggle between the two options.

3. Press Mode to confirm ON or OFF for Target Distance. If Target Time is off, the

watch will skip to setting the Interval Distance.

4. Increment or decrement the target distance by pressing or ho lding the START/S OP/T +

or NEXT/SAVE/- button.

5. Confirm the Target Distance by pressing the MODE button then continue to set the

Interval Distance.

6. Any changes made in the Target Distance mode will automatically enable the Target

Distance function.

Interval Distance:

1. To turn the Interval Distance on or off, press the START/STOP/+ or NEXT/SAVE/-

button to toggle between the two options.

2. Press Mode to confirm ON or OFF for Interval Distance. If Interval Distance is off,

the watch will skip to setting the Target Speed.

3. Increment or decrement the Interval Distance by pressing or holding the STAR TT/S OP/+

or NEXT/SAVE/- button.

4. Confirm the Interval Distance by pressing the MODE button then continue to set the

Target Speed (Walking Mode).

5. Any changes made in the Interval Distance Mode will automatically enable the Interval

Distance function.

Target Speed (Walking Mode):

1. To turn the Target Speed (Walking Mode) on or off, press the START/STOP/+ or

NEXT/SAVE/- button to toggle between the two options.

2. Press Mode to confirm ON or OFF for Target Speed (Walking Mode). If Target Speed

for walking is off, the watch will skip to setting the Target Speed for Running Mode.

If Target Speed is activated, the next step is to set the Maximum Target Speed.

3. Increment or decrement the Maximum Target Speed (Walking Mode) by pressing or

holding the START/STOP/+ or NEXT/SAVE/- button

4. Press Mode to set the Minimum Target Speed (Walking Mode)

5. Increment or decrement the Minimum Target Speed (Walking Mode) by pressing or

holding the START/STOP/+ or NEXT/SAVE/- button

6. Confirm the Target Speed (Walking Mode) by pressing the MODE button then continu e

to set the Target Speed (Running Mode).

7. Any changes made in the Target Speed (Walking Mode) will automatically enable the

Target Speed (Walking Mode) function.

Target Speed (Running Mode):

1. To turn the Target Speed (Running Mode) on or off, press the START/STOP/+ or

NEXT/SAVE/- button to toggle between the two options.

2. Press Mode to confirm ON or OFF for Target Speed (Running Mode). If Target Speed

for running is off, the watch will skip to setting the Target Time. If Target Speed for

running is activated, the next stage is to set the Maximum Target Speed for running.

3. Increment or decrement the Maximum Target Speed (Running Mode) by pressing or

holding the START/STOP/+ or NEXT/SAVE/- button

4. Press Mode to set the Minimum Target Speed (Running Mode)

5. Increment or decrement the Minimum Target Speed (Running Mode) by pressing or

holding the START/STOP/+ or NEXT/SAVE/- button

6. Confirm the Target Speed (Running Mode) by pressing the MODE button and then

back to Target Time Setting Mode.

7. Any changes made in the Target Speed (Running Mode) will automatically enable the

Target Speed (Running Mode) function.

Note: -

P s & t MODE f 3 sec s to t t se t tores hold he bu ontt or ond qui he tting mode and re urn

Chronograph Mode, and all the revised setting will be saved. Alternativel y, sno button

press ored he for 60 secld onds tomatica w l auil lly tr gg the i er w u C g hatch to ret rn to hrono rap

Mode.

Remarks:

3 beeps alert alarm when interval distance is reached.

3 beeps x 3 times alert alarm when total target distance is achieved.

2 beeps every 10 seconds when speed is higher than maximum speed set.

1 beep every 10 seconds when speed is lower than minimum speed set.

If user turn ton he peed S ale alart rm for wal ingk , then ala rm for r unning will automatic yall

off and vise reverse.

MEMORY RECALL MODE

1. Press the MODE key until you have reached the Memory

Recall mode.

2. Press and hold the MODE button for 3 seconds to show the

data of the selected record and the record should start

flashing.

3. Press START/STOP/+ button or NEXT/SAVE/- button to scroll

through the numbered records

4. Press the MODE button again to confirm the record.

5. Press START/STOP/+ button or NEXT/SAVE/- button to view

the data: Time/Date - Calories/Fat Burnt - Distance/Steps

- walking or running time/average speed.

Delete Record:

1. Press and hold NEXT/SAVE/- button for 3 seconds to delete the selected record or

hold on for 4 seconds to clear all records.

2. Press START/STOP/+ or NEXT/SAVE/- button to toggle between YES or NO.

3. Press and hold the MODE button to confirm.

Note:

Every time the watch is reset, all records will be removed.

No buttons pressed or held for 60 seconds will automatically trigger the watch to retur n

to time/date Mode.

1. Press the MODE key until you have reached the Calibration Mode.

2. Press NEXT/SAVE/- button to select "WALK" or "RUN".

3. Press START/STOP/+ button to start the calibration and press again to stop the

calibration.

4. To quit calibration during the process of calibration, press and hold the MODE butto n

will automatically trigger the watch to return to the default time/date mode.

Calibration Setting:

1. Press and hold MODE button to enter the Calibration

Setting Mode.

2. Increment or decrement the Calibration Distance by

pressing or holding the START/STOP/+ or NEXT/SAVE/-

button

3. Confirm the Calibration Distance by holding the MODE

button which should trigger the watch to return to

calibration mode.

4. No buttons pressed or held for 60 seconds will

automatically trigger the watch to return to time/date mode.

Note:

- Stride leng isth limited to a of range 20-180cm (8" to 5'11") or f both walking and running.

If the calibrated result is beyond this range then the previous stride length will be used .

- c rat s t o fore, t v set sedIf stride alib ion ha no been perf rmed be he stride alue will be ba

on the height. But once the stride has been calibrated, this will automatically replac e

the stride length calculated based on the user's height.

CALIBRATION MODE

1. Press the MODE key until you have reached the User

Setting Mode

4. Press the MODE button to enter next setting - WEIGHT

5. Press START/STOP/+ or NEXT/SAVE/- button to increment

or decrement the setting data. (Default:45kg/99lb,

Range:20-227kg/45-501lbs)

6. Press the MODE button to enter next setting - HEIGHT

7. Press START/STOP/+ or NEXT/SAVE/- button to increment

or decrement the setting data. (Default:170cm/5'6",

Range:50-250cm/1'8"-8'2")

8. Press the MODE button to enter next setting - AGE

9. Press START/STOP/+ or NEXT/SAVE/- button to increment

or decrement the setting data. (Default:26, Range:5-128)

USER SETTING MODE

2. Press and hold MODE button to enter the User Setting

Mode - UNIT

3. Press START/STOP/+ or NEXT/SAVE/- button to change

the display value ( kg/cm or lb/feet & inch )

10. Press the MODE button to enter next setting - GENDOR

11. Press START/STOP/+ or NEXT/SAVE/- button to select

Male or Female. (Default:Male)

12. Press the MODE button to enter next setting

- WALKING STRIDE LENGTH

13. Press STAR TT/S OP/+ or NEXT/S AVE/- button to incremen t

or de encrem t t sehe tting da ta.( t: cm/ ",De aulf 71 27 : -Range 20

180cm/8"-70")

14. Press the MODE button to enter next setting

- RUNNING STRIDE LENGTH

15. Press START/S OP/+T or NEXT/S AVE/- button to incremen t

or decrement the setting data. (Default:120cm/47", Range:

20-180cm/8"-70")

16. Press the MODE button to enter next setting - KE ONY T E

17. Press START/STOP/+ or NEXT/SAVE/- button to select

ON or OFF. (Default: OFF)

18. Press the MODE button to enter next setting - CHIME

19. Press START/STOP/+ or NEXT/SAVE/- button to select ON

or OFF. (Default: OFF)

20. No button press or hold for 60 seconds and the unit will return

to User Setting Mode. No button press or hold for another

60 seconds will bring the time/date mode back.

SCREW

BACK COVER

O Ring

CR2032

BATTERY

Diagram 1

INSTALLING THE BATTERY

The Watch uses 1 piece CR 2032 batteries. Use only the recommended batteries.

NOTE: eChanging the battery will erase the data in the watch previously input into th

device and you can then/will need to re-set the watch all over again.

1. The battery compartments located at the back of the watch.

2. To y, rinstall/ replace the batter unscrew the battery compartment with the screw drive

and simply slide out afterwards.

3. Take out the old battery and dispose of properly.

4. Gently place a new battery into the battery slot of the battery compartment, making

sure that the poles are correctly placed.

5. Screw back the battery compartment, when finished as in the diagram below

IMPORTANT BATTERY INFORMATION

Battery installation and removed should be performed by an adult

Use only batteries recommended in this instruction sheet

Be sure to install the batteries with the correct polarity, as indicated

Remove all batteries when replacing the old batteries with new batteries

Only batteries of the same and equivalent type as recommended are to be used

Do not short-circuit the supply terminals

Exhausted batteries should be removed from the product

Non-rechargeable batteries are not to be recharged

Rechargeable batteries are to be removed from the product before being charged

Rechargeable batteries are only to be charged under adult supervision

Different types of batteries, new and used batteries are not to be mixed.

SPECIFICATIONS

Time Format: Year, month, date, day, hour, minute, second,

am/pm 12/24 hours

Calendar System: Full Auto-calendar pre-programmed from 2000 to 2099

Features: Average Speed, Step Counting, Calories

Consumption, Fat Burnt, Exercise time

Measurement Range: Calories Consumption: 0-99999.9 kcal

Fat Burnt: 0-99999.9

Number of step: 0-999999

Distance:0-9999.99 km

Exercise Time: 0-23 hr 59 m 59 s 99

Memory Date: 15 Memory Record

Chronograph: Measuring Unit: 1/100 second

Measuring Capacity: 23 hr 59 m 59 s 99

CAUTION

Should you encounter any problems with the watch (e.g. malfunct oning of paramete i a r,

static electricit y, einterferences within the product or the need to re-set the device), pleas

press four buttons at the same time to reset the watch (the watch should not connect with

computer). All data previously input into the device will be erased and you can then/wil l

need he wa all again hould hi ail he ua ion to re et t-s tch over . S t s f to co e trr ct sit t , remove

the batteries and then put them back into the battery compartment.

Then ollow all he f t steps mentioned above in order to inpu the necessary data once moret .

T c t t of t s m is s t or to c t t f t r t . tohe on en hi anual ubjec in der hange wi hou ur he no ice Due

pr t mitat , t s s t s m may ffer om t a s y.in ing li ion he di plays hown in hi anual di fr he ctual di pla

The manufacturer and its suppliers hold no responsibility to you or any other persons fo r

an da age pen lo an he lai en ing hi oduy m ex se s, st- ts,profi or y ot r c ms aris by us t s pr ct. The

contents of this manual may not be reproduced without the permi ssion of the manufacture r.

73-261-0001

www.pyleaudio.com

PHRM84

Produkt Specifikationer

Mærke:	Pyle
Kategori:	Sportsur
Model:	PHRM84

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PHRM84 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sportsur Pyle Manualer

Pyle PACT1 Manual

29 September 2024

Pyle PSWDV60GN Manual

19 September 2024

13 August 2024

13 August 2024

6 August 2024

6 August 2024

6 August 2024

5 August 2024

2 August 2024

2 August 2024

Sportsur Manualer

Nyeste Sportsur Manualer

Polar FS3C Manual

10 Oktober 2024

TFA Silikon Manual

7 Oktober 2024

Bryton Cardio 40 Manual

5 Oktober 2024

Polar Ignite 2 Manual

4 Oktober 2024

21 September 2024

20 September 2024

13 September 2024

12 September 2024

TFA HiTrax Pulse 42.7007 Manual

8 September 2024

Goodis GDSW8453 Manual

6 September 2024