Pyle PSTNDW18 Manual


Læs nedenfor 📖 manual på dansk for Pyle PSTNDW18 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
1/2” Sheet Rock
2”
2” x 4”
Vertical Support
www.PyleUSA.com
PSTNDW18
with Angle, Tilt, Rotation Adjustment (Pair)
Dual Universal Adjustable Wall Mount Speaker Bracket Stands
Installation Instructions:
Required Tools: socket or hand wrench, drill, drill bit, stud nder, pencil, level,
tape measure, (4) 3/8” x 4” lag bolts
Step #1: Remove brackets from box.
Step #2: Check for stud location with a stud nder and place speaker bracket in
desired location.
Step #3: Test that the bracket plate is level and mark the hole locations on the
wall using the holes from bracket backer plate as a template.
Step #4: Drill proper mounting hole (smaller than outer thread diameter of your lag bolts) through wall into
wood studs or concrete block. Hole depth should be properly drilled so that your lag bolt can go through the
sheet rock and 2” into the stud.
Step #5: Place speaker bracket on wall and install 3/8” lag bolts (recommended) in the upper location. Securing
tightly until the head of the lag bolt is rmly against the bracket. Repeat for bottom location.
Step #6: Before placing the speaker cabinet on the bracket, test installation by conrming the bracket will hold
the weight of your speaker. If desired, tilt the angle of the bracket downward to the desired angle and tighten
the bolts to lock in place.
Step #7: Place the speaker on the cabinet by inserting the vertical sleeve into the speaker cabinet’s internal
adapter. Be sure the speaker is secure before releasing it. Test installation with speaker in vertical and tilted
positions to be sure the bracket stays rmly against the wall.
90° (degrees) 30° (degrees)
At upright 90° position, you can
mount a 22” deep speaker cabinet.
At 30° tilt down position, you can
mount a 30” deep speaker cabinet.
Adjustable tilt feature allows you to mount a 30” speaker cabinet


Produkt Specifikationer

Mærke: Pyle
Kategori: Ikke kategoriseret
Model: PSTNDW18

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PSTNDW18 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Pyle Manualer

Pyle

Pyle PDWM2950 Manual

12 Januar 2025
Pyle

Pyle PVCLG85 Manual

9 Januar 2025
Pyle

Pyle PSCBLKIT22 Manual

1 Januar 2025
Pyle

Pyle PKST44W Manual

6 December 2024
Pyle

Pyle PL2DN105 Manual

6 December 2024
Pyle

Pyle PDWR61BT Manual

21 Oktober 2024
Pyle

Pyle PVTC320U Manual

27 September 2024
Pyle

Pyle PLCAPE50 Manual

26 September 2024
Pyle

Pyle PLCAPE60 Manual

26 September 2024
Pyle

Pyle PLCAPE32 Manual

24 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Yeaz

Yeaz CYCLONE Manual

3 Februar 2025
Yeaz

Yeaz Ocean Vibes Manual

3 Februar 2025
Rollei

Rollei V6i Manual

3 Februar 2025
Panasonic

Panasonic DP-001-P Manual

2 Februar 2025
Manhattan

Manhattan 102681 Manual

2 Februar 2025
Manhattan

Manhattan 168373 Manual

2 Februar 2025
SoundTube

SoundTube TS81-EZ Manual

2 Februar 2025
Kugoo

Kugoo KuKirin G3 Manual

2 Februar 2025