Radial Engineering IceCube IC-1 Manual


Læs nedenfor 📖 manual på dansk for Radial Engineering IceCube IC-1 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
To view the 3-year transferable warranty details and product
specification please visit www.radialeng.com
Thank you for purchasing your Ice-Cube™ IC-1 signal line isolator! Although the Ice-Cube
is easy to use, please take a minute to read this short manual. It will give you insight on how
to get the most out of your Radial product. Should you have any questions check our
Ice-Cube FAQ at www.radialeng.com. This is where we post questions from users and
informational updates. If you still do not find what you are looking for, send us an email at
info@radialeng.com and we will do our very best to answer you in short order.
The Ice-Cube is a passive audio isolator designed to be inserted into the signal chain to
eliminate hum and buzz caused by ground loops. The Ice-Cube accepts both balanced or
unbalanced line-level signals and is equally suitable for consumer electronics and
professional audio. Since the Ice-Cube is passive, no power supply is required.
MAKING CONNECTIONS
As with any audio system, it is good practice to turn volume levels down or audio systems
off to prevent plug-in and turn-on transients from damaging more sensitive components
such as loudspeakers and headphones.
You can connect balanced devices to and from the Ice-Cube using standard XLR cables up
to 100 meters (300’) in length. The Ice-Cube is wired following the AES convention with
pin-1 ground, pin-2 (+), and pin-3 (-).
UNBALANCED SOURCE
Connect the output of the DJ mixer to the Ice-Cube with a short unbalanced cable up to 6
meters (20’). Connect the output of the Ice-Cube to the PA system with balanced cable up to
100 meters (300’).
Conne ing unbalan ed dect c vices r ce t s am t by r y B t for will edu he ignal pli ude oughl 6d bu high
ou pu act t tive devices like CD DVD players and DJ / mixers his is usually t no problem Simplyt a .
in eacr se t to comhe gain pensate.
Once the connections are made, slowly increase the volume to test. It is a good idea to
always test the audio system at low volumes. This will further prevent system damage
should a cable or connection be faulty.
If your devices uses balanced ¼TRS connectors you can use a balanced TRS to XLR
adaptor cable to connect balanced devices.
USING THE ICE-CUBE WITH UNBALANCED SIGNALS
You c c an onnect an unbalan ced de vice, like a DJ mixer, to t he Ice- c ve i t t Cube and on rt ts ou pu
to balanced signal. This allows you to run a long balanced cables from the Ice-Cube to the
destination mixing console while also isolating noise caused by ground loops. Connect
unbalan ed dec vices by us a pring operly r ter c as s wi ed adap able hown below.
DJ Mixer
Source
Mixing Console Balanced XLR Cable
(up to 100 meters)
Unbalanced RCA
(up to 6 meters)
OUT
IN
GROUND
TM
IC-1 BALANCED LINE ISOL ATOR
LIF T
ISOLATING BALANCED DEVICES
W te ac m t t t is c far such as a mixer s f r hen in rf ing equip en ha di anst ed apart, and el powe ed
s ker, t vices pea he de will derive their AC r powe from ffer t s di en leg on he t AC di ibu ion bostr t x.
T s c o to hi an ften lead hum and bu zz c s by gr au ed ound loops. Use t he Ice- to is te t Cube ola he
t vices by se it t th c c T e- ces a wo de in rting in be ween wi balan ed ables. he Ic Cube in odutr
m tic br tagne idge hat isolates the de vices by ay cu .blo ingck str DC rr tsen
Mixing Console
Source
OUT
IN
GROUND
TM
IC-1 BALANCED LINE ISOL ATOR
LIF T
Balanced XLR Cable
(up to 100 meters)
Balanced XLR Cable
(up to 100 meters)
Powered
Speakers
LIFTING THE GROUND
The Ice-Cube features recessed a
GROUND LIF switch. If you hear noise T
such as m s t hu and buzz try pu hing he
GRO LUND IF tcT swi h rd us a inwa ing
sm scrall ewdriver. W s , t hen pu hed in he
s gr c is th ignal ound onne ionct ‘li edft on bo
s s of t ter o er. T s ide he in nal tr sfan rm hi
fu r is tes t s e t rthe ola he ourc and de inast ion
devices r y res se.and gene all ults in less noi
Mixing Console
Source
Recorder
OUT
IN
GROUND
TM
IC-1 BALANCED LINE ISOL ATOR
LIF T
Balanced Cable
(up to 100 meters)
Unbalanced Cable
(up to 6 meters)
UNBALANCED DESTINATION
The Ice-Cube can also convert the balanced output from a pro mixing console to unbalanced
allowing you to interface a recording device like a laptop or hand-held recorder.
1 2
3SHIELDED TWISTED PAIR CABLE
XLR
12
3
XLR
1 2
3SHIELDED TWISTED PAIR CABLE
XLR
RING (-)
TIP (+)
SLEEVE (G)
SHIELD/GROUND (G)
SHIELD/GROUND (G)
SHIELD/GROUND (G)
SHIELD (G)
1 2
3TIP (+)
SLEEVE (G)
COAXIAL CABLE
Ice-Cube rIC-1 Line Isolato


Produkt Specifikationer

Mærke: Radial Engineering
Kategori: Ikke kategoriseret
Model: IceCube IC-1

Har du brug for hjælp?

Hvis du har brug for hjælp til Radial Engineering IceCube IC-1 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Radial Engineering Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024