RCA LED40G45RQD Manual

RCA TV LED40G45RQD

Læs nedenfor 📖 manual på dansk for RCA LED40G45RQD (2 sider) i kategorien TV. Denne guide var nyttig for 23 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

English Part No.: RN0340R24009

MADE FOR TODAY

Date of Purchase

Please register your product at www.rca.com

Please keep your sales receipt and keep the record of the serial number

and the date of purchase in order to receive warranty parts and service.

The serial number is located at the back of the TV.

Serial Number

Congratulations on your purchase! As you enjoy your new product,

please keep these safety tips in mind :

The Issue

The home theater entertainment experience is a

growing trend and larger ﬂat panel displays and

popular purchases.

However, ﬂat panel displays are not always supported

on the proper stands of installed according to the

manufacturer’s recommendations.

Flat panel displays that are inappropriately situated

on dressers, bookcases, shelves, desks, speakers,

chests or cats may fall over and cause injury.

1 2 2 3

Wall Mounting :

IF YOU DICIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS :

- Use a mount that has been recommended by the display manufacturer and/or listed by an independent

laboratory (such as UL,CSA,ETL).

- Follow all instructions supplied by the display and wall mount manufacturers.

- If you have any doubts about your ability to safely install your ﬂat panel display, contact your retailer about

professional installation.

unsure, contact a professional installer.

- A minimum of two people are required for installation. Flat panel displays can be heavy.

This Manufacturer Cares!

The consumer electronics industry is committed to

making home entertainment enjoyable and safe.

Tune Into Safety

- One size does NOT ﬁt all. follow the manufacturer's

recommendation for the safe installation and use of

your ﬂat panel display.

- Carefully read and u nderstan d all en closed

instructions for proper use of this product.

- Don't allow children to climb on or play with

furniture and television sets.

- Don't place ﬂat panel displays on furniture that can

easily be used as steps, such as a chest of drawers.

- Remember that children can become excited while

watching a program, especially on a "larger than life" ﬂat

panel display. Care should be taken to place or install

the display where it cannot be pushed, pulled over, or

knocked down.

- Care should be taken to route all cords and cables

connected to the panel display so that they cannot be

pulled or grabbed by curious children.

Caution and Warning

CHILD

SAFETY

It makes A Difference How and Where

You Use Your Flat Panel Display

Child Safety Guide

CONTENTS

¡Muchas gracias por su uso del presente producto!

Cuando usted disfruta de su nuevo producto, por favor tenga

en cuenta los consejos de seguridad:

Posibles Problemeas

- La experiencia de entretenimiento de cine en casa

es una tendencia creciente y los grandes monitores

de pantalla plana son muy populares.

embargo, los monitores de pantalla plana no se

han instalado siempre en los soportes adecuados o

instalado de acuerdo con las recomendaciones de

fabricante.

- Los monitores de pantalla plana que se han

instalado inadecuadament en tocadores, estanterías,

estantes, escritorios, oradores, baúle s o carros se

pueden caer y causar el daño corporal.

Montaje de Pared:

SI USTED DECIDE A MONTAR SU MONITOR DE PANTALLA PLANA LA PARED, SIEMPRE

- Use una montura que se ha recomendadop or el fabricante de monitor y/o listado por un laboratorio

independiente(como U L, CSA, ETL).

- Siga todas las instrucciones ofrecidas por eI fabricante de monitor y montaje de pared.

- Si usted tiene cualquier duda sobre su habilidad para instalar seguramente su monitor de pantalla plana,

contacte a su distribuidor para la instalación profesional.

- Compruebe que la pared adonde se está montando el monitor es adecuada. Algunos montajes de la pared

no son diseñados para ser montados a paredes con tachones de acero o la vieja construcción de bloque de

ceniza. Si usted está inseguro, contacte a un instalador profesional.

- Por lo menos dos personas se requieren para la instalación. Los monitores de pantalla plana puede ser pesados.

¡Al Fabricante le Importa

- La industria electrónica del consumidor está

comprometida a hacer el entretenimiento de casa

agradable y seguro.

Ajustar Hasta Seguridad

- Un tamaño ﬁjo NO es adecuado para todos. siga las

recomendaciones de fabricante para la instalación segura y

el uso de su monitor de pantalla plana

- Lea con cuidado y entienda to das las instrucciones

adjuntas para el uso propio de este producto.

- No permita a los niños a subir al equip o o jugar con

muebles y televisiones.

- No cloque los monitores de pantalla plana en el mueble

quese puede usar fácilmente como escalón, así como una

cómoda.

- Recuerde que los niños pueden llegar a ser excitados al ver

una programación, especialmente en el monitor de pantalla

plana "más grande q ue vida". El cuidado se tiene que

empezar por poner o instalar el moniotr donde no se puede

empujar, detener al castado del camino ni echar abajo.

- El cuidado se tiene que empezar por encaminar todos

los cordones y cables conectados al monitor de pantalla

plana para que no se puedan tirar o agarrar conectados

al monitor de pantalla plana para que no se pueden tirar o

agarrar por los niños curiosos.

SEGURIDAD

DE NIÑOS:

El Cómo y Doónde Usted usar Su

Monitor de Panntalla Plana

Marca La Diferrencia

FCC Notice

Guía de seguridad para niños

Fcc Information

This equipment has been tested and f ound to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

Th is e qui pme nt ge ner ate s, u ses an d c an r adi ate ra dio

frequency energy and, if not installed and used in accordance

with the instructions, may ca use harmful interference to radio

Communications.

However, there is no Guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful inte rference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for

help.

Device complies with FDA radiation performance standards, 21

CFR subchapter.

Caution: (Invisible) Laser Radiation when open.

Do not stare into beam.

Choose Your Connections

TV LED40G45RQD supports various connections to other

devices (such as DVD, VCR, Set-top box, etc.). Please follow the

table to choose the cables which adapt to your device.

Note: HDMI, the HDMI logo, and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing LLC

Caution: Unplug the AC cord when you connect other devices to

TV.

Connecting AV Composite device

(Good Video Quality)

Composite connector will be shared with Component Y connector.

To connect a composite AV device, such as a DVD player, follow

these steps:

1.Connect the COMPOSITE jack on the side of TV to the video

output jacks of device via video cable (yellow).

2.Connect the L-AUDIO-R jacks on the side of TV to the audio

output jacks of device via audio cable.

Notice the left channel jack and plugs are white and the right

channel jack and plugs are red.

Note: AV signal belongs to composite video. This kind of video

signal has regular good display quality.

Composite Video Connection

The picture below is an example of a connection using the

composite video jack.

The ﬁrst step in connecting your TV is obtaining the signal. Your

TV LED40G45RQD has a back panel, which allows you to receive

analog and/or digital television channels via ANT/CABLE jack.

Before connecting your TV, determine using an antenna or a cable

service to obtain the signal.

A. Antenna

Connect the antenna to TV via coaxial cable on ANT/CABLE jack

of the back panel. You are ready to receive air local digital and

analog channels.

B. Cable TV service

Connect the cable TV wall jack to TV via coaxial cable on

ANT/CABLE jack of the back panel. You are ready to receive off-air

local digital and analog channels.

C. Set-Top Box

If you use a set-top box, you may need to call your cable company

or satellite service provider, which use a special connection, please

refer to the user’s guide of set-top box.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water. For example, do not use

near a laundry tub, in a wet basement, or near a swimming pool,

and the like.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions. Slots and openings in the cabinet

back or bottom are provided for ventilation, to ensure reliable

operation of the TV and to protect it from overheating. These

openings must not be blocked or covered. The openings should

never be blocked by placing the TV on a bed, sofa, rug, or other

similar surface.

8. Do not install near any heat sou rces such as radiators, heat

registers, stoves, or other apparatus (including ampliﬁers) that

produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than the

other. A grounding-type plug has two blades and a third grounding

prong. The wide blade or the third prong is provided for your

safety. If the provided plug does not ﬁt into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

11. O nly u se at tach ment s/ac cesso ries s peci ﬁed b y th e

manufacturer.

12. Use only with cart, stand, tripod, bracket, or table speciﬁed by

the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

A TV and cart combination should be moved with care. Quick

stops, excessive force, and uneven surfaces may cause the TV and

cart combination to overturn.

13. Unplug this apparatus during lightning storms or when unused

for long periods of time.

For added protection for this TV receiver during a lightning storm,

or when it is left unused for long periods of time, unplug it from the

wall outlet and disconnect antenna or cable system.

This will prevent damage to the TV due to lightning and power line

surges.

14. Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

15. This TV should be operated only from the type of power supply

indicated on the rating label.

If customer is not sure the type of power supply in your home,

consult your appliance dealer or local power company. For TV

remote control battery power, refer to the operating instructions.

16. The TV set shall not be exposed to dripping or splashing. No

objects ﬁlled with liquids, such as vases, shall be placed on the TV set.

HEAD PHONE:

Connect a 3.5mm headphone for personal audio.

USB:

Connect your USB storage device to enjoy music/photo ﬁles

on your TV. (Also used for service purpose).

HDMI IN

HDMI1/DVI, 2: (High-Deﬁnition Multimedia Interface) It provides an

uncompressed digital connection that carries both video and audio

data by way of an integrated mini-plug cable.

MHL: (Mobile High-Deﬁnition Link) To standard HDMI input, transmit

the video/audio from portable electronic device (cellphone, digital

camera,digital-video camera) to TV set.

ARC: (Audio Return Channel)

Adopted in TV output of digital audio, can be

connected to the device supporting ARC, transmit the TV sound to the device.

COMPONENT Y/Pb/Pr: Connect a device that has component

video jacks, suc h as a DVD player. To access device connected

to the Y/Pb/Pr jack, press the INPUT button on your remote; then

press the up/down arrow to select Component. Press the OK button

at last to conﬁrm.

Y/Pb/Pr (Component Video):

They provide good picture quality

because the video signal is separated into three components. Use

three video-grade or component video cables for the connection.

When using Y/Pb/Pr, make sure you connect left and right audio

cables to the AUDIO IN R/L jacks.

L-AUDIO-R, COMPOSITE: Connect an AV device that has

composite video jacks, such as a VCR or a DVD player. To access

device connected to these jacks, press the INPUT button on your

remote; then press the up/down arrow to select AV. Press the

ENTER button at last to conﬁrm.

AUDIO IN L: Left audio channel connection. The left audio

connector is usually white. For mono audio sources, be sure to

use the left AUDIO INPUT.

AUDIO IN R:

Right audio channel connection. The right audio

connector is usually red.

ANT/CABLE: Connect to receive the signal from your antenna or

cable via coaxial cable.

Digital Audio out: Connect a coaxial cable for digital audio

output.

Connecting HDMI device

(Best Video Quality)

To connect a HDMI device, such as a DVD player, please Connect

the HDMI1/DVI/MHL, 2/ARC jack on the side of TV to the output

jacks of

device via HDMI cable.

To connect a DVI device, via DVI port of PC or Device and HDMI

jack of TV:

Front Panel

Power/Standby Indicator: Light up in red when the TV is in

standby mode. Light out when the TV is on.

Remote Control Sensor: Remote control IR sensor, which

receives infrared ray sent by remote control.

Codes for Cox Communications: 0178

Codes for Comcast: 10178

Codes for Dish Network: 627

Codes for Fios Verizon: 0205, 0057, 0493, 0775

Keypad Buttons

If you cannot locate your remote, you can use the keypad buttons

on your TV to operate many TV features.

Connecting YPbPr Component device

(Better Video Quality)

To connect a component device, such as a DVD player, follow

these steps:

1.Connect the COMPONENT IN Y/Pb/Pr jack on the side of TV to

the video output jacks of device via video cable (green, blue and

red).

2.Connect the L-AUDIO-R jacks on the side of TV to the audio

output jacks of device via audio cable.

Notice the left channel jack and plugs are white and the right

channel jack and plugs are red.

Note: Y/Pb/Pr jacks are component video. This kind of video signal

has better display quality.

Component Video Connection

The picture below is an example of a connection using the component

video jack.

17. Never push objects of any kind into this TV through openings

as they may touch dangerous voltage or other electrical parts that

could result in ﬁre or electric shock. Never spill liquid of any kind into

the TV.

18. Unplug the TV from the wall outlet before cleaning. Do not use

liquid or aero cleaners. Use a damp cloth for cleaning.

19. This TV should never be placed near or over a radiator or heat

resource. This TV should not be placed in a built-in installation such

as a bookcase or rack unless proper ventilation is provided or the

manufacturer's instructions have been adhered to.

20. Do not place this TV on an unstable cart, stand, tripod, bracket,

or table. The TV may fall, causing serious injury to someone, and

serious damage to the appliance.

21. Do not attempt to service this TV by yourself because opening

or removing covers may expose you to dangerous high voltage or

other hazards. Refer all servicing to qualiﬁed service personnel.

22. This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

23. WARNING: To prevent injury, this apparatus must be securely

attached to the ﬂoor/wall in accordance with the installation

instructions.

24. To reduce the risk of electric shock, the grounding of center pin

of plug must be maintained.

25. If an outside antenna or cable system is connected to the TV,

be sure the antenna or cable system is grounded to provide some

protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code, ANSI/NFPA NO.70,

provides information with respect to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to an

antenna discharge unit, size of grounding conductors, location of

antenna discharge unit, connection to grounding electrodes, and

requirements for the grounding electrodes. (See ﬁgure A)

54 5 6

6 7

Safety Strap

Caution: Pushing, pulling or climbing on the TV may cause the TV

falling. Do not let children climb or hang on the TV. Always place the

TV on a sturdy, level, stable surface that can hold the weight of TV.

And if possible, secure the TV according to the instruction below

(Note: The fastening components such as screws are not supplied

with TV).

Step one: Insert the M6 mounting screws into the upper two wall

mounting screw holes and fasten them (Figure B).

Step two: Insert anchors to wall and connect the bolts and anchors

with ropes or chains (Figure C).

Before Turning On TV

Check Accessories

Check the accessories that are packed with your TV.

(refer to Quick Start Guide)

Setup TV Table Stand

Please refer to Quick Start Guide to carry out stand installing.

Select TV Location

Select a ﬂat, stable table to place your TV set. Please follow the

safety instructions when placing the TV.

Connection and Using

After placing your TV properly, you can connect the TV with power

supply and cable components. For further information, see page 5

to page 6.

1. Connect the HDMI1/DVI/MHL jack on the side of TV to the DVI

port of PC via HDMI-DVI cable.

2. Connect the L-AUDIO-R jack on the side of TV to the audio

output jack of computer with audio cable (dual-channel RCA jacks

to 3.5mm stereo jack or the L-AUDIO-R jack).

Note: 1. HDMI (High-Definition Multimedia Interface) is a compact

audio/video interface for transmitting uncompressed digital data. It

carries the audio and video signal via the same cable and has the

best display quality.

2. HDMI-DVI cable transfers only video signal from DVI port of

DVI device to HDMI jack of TV. For audio signal, please connect

audio output to L-AUDIO-R jack on TV back panel.

HDMI Connection

The picture below is an example of a connection using the HDMI

video jack.

Turning On and Off

Connect the AC cord to power the LED LCD TV. At this time the

TV will enter standby mode and power indicator will turn red. Use

Power button ( ) on the top panel of TV or on the remote control

to turn on the TV. After switching off the TV for 5 seconds, you can

turn on TV again.

Choosing TV Channel

OK button to conﬁrm.

For example, to watch analog channel “A51”,

press “5”, “1”,

“OK” on remote control in sequence.

Note: Although there is no analog TV signal available in America,

we reserve ATV functions for some expansible use.

Tuning To Digital Channels

Selecting Input Source

Pre ss I NPU T b utt on on rem ote

control to display Source Select list.

Use up/down arrows to highlight the

source you need and press OK to

conﬁrm.

About remote control

working distance and

angle, see the quick

start guide

Keypad and Front Panel

TV Jacks Explanation

Side Panel Connections

Cable ConnectionsPreparation for Your New TV

TV Signal Connection

Safety Precautions

Basic Operations

How to Obtain Various Kinds of Input Sources

After connection is done, press INPUT button on remote control

or TV top panel to choose the input source you need. See page 7,

Basic Operation of TV.

Displays the Source Select List.

Displays the TV Main Menu.

Scans up through the channel list.

In the TV menu system, it acts like the up arrow on the

remote control and can be used to select menu options.

Scans down through the channel list. In the TV menu

system, it acts like the down arrow on the remote

control and can be used to select menu options.

Increases the volume. In the TV menu system, it acts

like the right arrow on the remote control and can be

used to select menu options.

Decreases the volume. In the TV menu system, it acts

like the left arrow on the remote control and can be used

to select menu options.

Turns the TV on and off.

Note: Do not plug the AC cord until you have accomplished all the

connections. This TV does not support QAM under cable channel

search.

To connect an ARC HDMI OUT device, please connect to the HDMI

input port of the device such as ampliﬁer,

Tuning To Analog Channels

an analog channel has a channel number beginning with “A”.

Input the digital number with numeric buttons directly and press

USB

DVD

Move SelectOK

Remote Control Sensor

Power/Standby Indicator

LED LCD TV

DVD COMBINATION

User's Manual

LED40G45RQD

MODEL

A digital channel has a channel number beginning with “D”. Input

the main digital number with numeric buttons directly, then press

“-” button on remote control, and input the sub number at last.

For example, to watch analog channel “D31-1”, press “3”, “1”, “-”,

“1”, “OK” on remote control in sequence.

Changing Channels Directly You can use CH button to increase

channel number and CH to decrease channel number.

When no OSD (On Screen Display) is used, the up/down arrows

can also work as CH /CH buttons.

Channel Bar 08

Adjusting Volume 08

EPG (Electronic Program Guide) 08

Selecting Input Source 07

OSD Menu Operations 08

Turning On and Off

Choosing TV Channel

Basic Operations

Frequently Asked Questions (FAQs)

DVD OPERATIONS

Troubleshooting

Warranty Card

Wall Mounting Unit Speciﬁcation

USB Media Play

Product Speciﬁcation

Child Safety Guide 02

Caution and Warning 02

Safety Precautions 04

Cable Connections 05

Side Panel Connections 05

Connecting AV Composite video device 05

TV Signal Connection 05

Connecting YPbPr Component device 06

Keypad and Front Panel 07

Connecting HDMI device 06

Keypad Buttons 07

Front Panel 07

TV Jacks Explanation 06

Check Accessories 05

Setup TV Table Stand 05

Select TV Location 05

Preparation for Your New TV 05

Connection and Using 05

How to obtain various kinds of Input Sources

Picture Menu

Adjust the OSD Screen

Audio Menu

Quick Menu

Time Menu

Channel Menu

Setup Menu

Lock Menu

HDMI, the HDMI logo, and High-Definition

Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC

Produkt Specifikationer

Mærke:	RCA
Kategori:	TV
Model:	LED40G45RQD
Vekselstrømsindgangsfrekvens:	60 Hz
Produktfarve:	Sort
Pakkevægt:	11400 g
Pakkedybde:	177.8 mm
Pakkebredde:	990.6 mm
Pakkehøjde:	629.92 mm
Skærm diagonal:	40 "
Skærmopløsning:	1920 x 1080 pixel
Wi-Fi:	Ingen
HD-type:	Fuld HD
Naturligt aspektforhold:	16:9
Responstid:	8 ms
Synsvinkel, horisontal:	178 °
Synsvinkel, vertikal:	178 °
Skærm form:	Flad
Understøttede videotilstande:	480i,480p,720p,1080i,1080p
3D:	Ingen
Indbyggede højttaler(e):	Ja
Tuner type:	Analog & digital
Format til analogt signal:	NTSC
System for digitalt signalformat:	ATSC
Smart TV:	Ingen
Internet TV:	Ingen
Antal højttalere:	2
Udgangseffekt (RMS):	16 W
Antal HDMI-porte:	2
DVI-port:	Ingen
Antal USB 2.0-porte:	1
Komponentvideo (YPbPr/YCbCr) indgang:	1
Udgange til hovedtelefoner:	1
Fælles grænseflade (CI +):	Ingen
Ethernet LAN:	Ingen
Skærmvisning (OSD):	Ja
Antal OSD sprog:	3
Slumretimer:	Ja
OSD-sprog:	ENG,ESP,FRE
Forældrekontrol:	Ja
VESA montering:	Ja
Strømforbrug (standby):	0.3 W
Strømforbrug (typisk):	59 W
Bredde (uden stativ):	924.56 mm
Dybde (uden stativ):	99.06 mm
Højde (uden stativ):	551.18 mm
Vægt (uden stativ):	8800 g
Bredde (med stativ):	924.56 mm
Dybde (med stativ):	195.58 mm
Højde (med stativ):	579.12 mm
Sammensat videoindgang:	1
Indgang til pc'en (D-Sub):	Ingen
Fælles grænseflade (CI):	Ingen
Lydtilstande:	Dynamic,Standard
Certificering:	UL / FCC
Støjreduktion:	Ja
Kontrastforhold (typisk):	5000:1
Lyd (L, R) udgang:	1
Kamfilter:	3D