Remington Hyperflex XR1430 Manual

Remington Barberkniv Hyperflex XR1430

Læs nedenfor 📖 manual på dansk for Remington Hyperflex XR1430 (2 sider) i kategorien Barberkniv. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

XR1430

Use and Care Guide

IMPORTANT SAFETY

INSTRUCTIONS

When using an electrical appliance, basic precautions should always be observed,

including the following. Please read all instructions before using this shaver.

WARNINGS

To reduce the risk of burns, fire, electric shock, or injury to persons:

• When connecting the charging unit to a power source outside of the USA or

Canada, use a plug adapter suitable for the power outlet. This device has a charg-

ing adapter that will work with worldwide 100V-240V power outlets.

• Only use the power adapter provided with this device.

• Do not reach for the appliance if it has fallen into water while plugged into the

power source. Unplug from the power source at the wall immediately.

• Shaver may be rinsed under water or used in the shower, but never use the

charging unit in the shower.

• Detach the shaver and charging unit from the power source before cleaning.

• Except when charging, always unplug this appliance immediately after using.

• When recharging place in a safe position, out of the reach of children and pets.

• Close supervision is necessary when this appliance is used by, on, or near children

or individuals with certain disabilities or special needs.

• Use this appliance only for its intended use as described in this manual.

• Do not use attachments not recommended or provided by the supplier.

• Never operate this appliance if the electrical cord is frayed or the plug is damaged.

• Keep the electrical cord away from heated surfaces.

• Never drop or insert objects into any of the appliances openings.

• This appliance is intended for household use only.

• Do not use outdoors, or operate where aerosol (spray) products are being used, or

where oxygen is being administered.

• Always attach the plug to the appliance, then to the wall outlet. To disconnect,

turn all controls to OFF, then remove plug from outlet.

• Always pull on the plug body to unplug the appliance from the wall socket.

Never pull on the electrical cord.

• Do not plug in or unplug this appliance when your hands are wet.

• Do not use extension cords or a voltage converter with this appliance.

• Do not wrap the power cord around the appliance.

• Always store the appliance and charger in low moisture area.

• Do not expose the appliance to temperatures over 140° F (60° C).

• Detach removable power cords from the appliance during storage.

• Do not use this shaver if the cutting head surfaces are damaged or broken as

facial injury could occur.

• This shaver and trimmer are intended for use on facial hair only. It should not be

used for longer hair on your head or body.

Product Features

SHAVER PARTS

1. HyperFlex cutting head

2. Full floating heads

3. Power on/off button

4. Battery Indicator display

5. Pop-up detail trimmer

6. Charging pins

7. Charging Stand

8. Charging adapter

9. Stubble attachment/Head guard

Charging

Charging Process

1. Plug the power cord adapter into the charging stand.

Unfold the charging stand into the open position. Plug the cord into the port

at the side of the charging stand. The plug has a custom shape to match the

charge stand and prevent use with incorrect adapters. (A)

2. Plug the adapter into the wall outlet.

Place the stand on a flat surface and where it cannot be accidently bumped into

standing water such as a sink or bathtub.

3. Place the shaver into the charge stand.

Position the shaver body so the charging pins of the shaver mate with the

charging strips in the charge stand. Note the LED battery display will (B)

indicate that the battery is actively charging as noted in the LED indicator

section of this manual.

4. Use the shaver until a recharge is required.

Do not leave the charger plugged in so that you are recharging the shaver after

every use. This will shorten the life of the battery. To use the charge stand to

hold the shaver on your counter between uses, simply unplug the adapter cord

from the charge stand and store it away until a recharge is needed.

A B

Use with gel or foam in

the shower for ultimate comfort.

SAVE THESE INSTRUCTIONS

HYPERFLEX

HyperFlex Cutting head

• Cutting head pivots and flexes to comfortably follow the contour of your face.

Full Floating heads

• Each head independently flexes to react to facial contours.

Dual Track Cutters

• Three rotary cutters with two cutting tracks for fast efficient shaves.

Lithium Battery

• Durable, long lasting power supply; 3X longer life than standard rechargeable cells.

60 minute run time

• Weeks of daily shaving on a single charge.

4 hour charge time

• Fast delivery of a full battery charge.

Waterproof

• Use dry or with shaving gel. Safe to use shaver in the shower for added comfort.

• Fast, simple cleaning under the faucet.

Worldwide voltage

• Provided charging adapter works with 100V to 240V power source.

Folding charge stand

• Rotate open to hold shaver while charging. Collapses down around shaver for

travel or storage.

Performance Features

LED lights display the battery charge level

• Low Charge: Top LED light will glow solid red to indicate the shaver needs to be

recharged. There is less than 5 minutes of run time remaining.

• Charging: Bottom LED light will glow solid green when shaver is placed in charger

to indicate the battery is taking a charge.

• Full Charge: When fully charged the green LED light will go off.

Your HyperFlex shaver may be used either dry or wet with shaving cream or gel.

We recommend that you use the shaver in the shower for optimal performance.

Wet Shaving

• Wet shaving will provide a very comfortable and close shave. The shaver is safe to

use in the shower or can be rinsed under running water at the sink.

• Wet your face and neck area with water.

• Apply shave gel or foam to your face.

• Press the power button to turn the shaver on. Rinse the cutting head under

running water.

• Place the shaver cutting head against your skin with all three cutters touching

your skin.

• Pressing lightly against your skin, move the shaver head in slow, small

circular motions.

• Hairs on your face and neck may grow in different directions. Moving your shaver

against the direction of hair growth will be most effective.

• You may use your free hand to gently stretch your skin tight which can aid in mak-

ing hairs stand up to more easily enter the cutting slots.

• To trim sideburns or edges of goatees or beards, press the pop-up trimmer release

button to activate the trimmer. Place the trimmer blade parallel with your skin and

use downward strokes to cut.

• When finished, rinse your face and check for any hairs that may have been missed

for quick touch up.

• When using your shaver with foams or gels it is important to rinse the cutting head

clean after each use. This will avoid having the gels dry in the cutting head and

clogging the shaver. Refer to the cleaning instructions to keep your shaver cutting

at peak performance.

LED Battery Indicators

Shaving Technique

2 1

By registering your new Remington® product, you will receive special offers.

Produkt Specifikationer

Mærke:	Remington
Kategori:	Barberkniv
Model:	Hyperflex XR1430
Produktfarve:	Sort
Opladningstid:	4 t
Batteriteknologi:	Lithium
Vandfast:	Ja
Indikator for batteriniveau:	Ja
Strømkilde:	Batteri
LED-indikatorer:	Opladning
Baberingssystem:	Rotations shaver
Antal barberingshoveder/blade:	3
Trimmer:	Ja
Vipbart skærehoved:	Ja
Vaskbar:	Ja
Genopladelig:	Ja
Driftstid:	60 min.
Indikator for fuldt opladet batteri:	Ja