Ridgid 424-S Manual


Læs nedenfor 📖 manual på dansk for Ridgid 424-S (6 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/6
Proper Use of Pipe Cutters
Pipe cutters are available in a number of different
sizes. Use depends on what size, type of material,
and the situation under which they are to be used.
It has always been acknowledged that the best way to
cut pipe is by using a pipe cutter. This method assures
that the pipe is cut squarely, accurately, and quickly.
The simplest form of pipe cutter is fitted with one cut-
ter wheel and two rollers which keep the cutter square
to the pipe and which are rolled around the circumfer-
ence of the pipe. Sufficient force creates a groove
which is gradually worked deeper until it cuts through
the pipe wall. No metal is removed; it is only displaced
and pushed away by the cutter.
Single wheel cutters must be rotated through 360° to complete the cut. Should there not be enough space
to do this, a four wheel cutter should be used. By swinging the cutter through an arc of 120° each
wheel will track to the groove cut by another wheel and thus completes the cut.
Pipe can, of course, be cut by the use of a hack saws, torches, and other means.
However, if the pipe is to be threaded, the end must be squared off. This can rarely
be achieved without a tool specifically designed for pipe cutting and may result in
badly cut threads and possibly broken dies.
Select The Correct Cutter
In order to get maximum performance from a tool, one should
always ensure that the correct model of pipe cutter has been
selected for the job. Definite forms of pipe cutters are available
for specific functions from, the simple single wheel tool to the
more sophisticated four wheel unit, and those which are specifi-
cally designed for use with power drives and threading
machines. Each of these tools has its own particular features
suited for its intended job. On occasion for lack of the correct tool,
some people try to cut pipe with a tubing cutter. A tubing cutter
should never be used for such work. Its design and construction
make it suitable for cutting through the thin walls of tubing and
thin walled conduit only.
Never try to cut pipe with the wrong cutter type
or cutter wheel. This may result in serious injury and damage
to the tool and work piece.
Check The Cutter Wheel
Always ensure that when selecting the cutter, the cutter wheel is
of the type suited to 1) the cutter being used and 2) the material
to be cut. Always inspect the cutter wheel before use to see that
it is not blunt or damaged in any way.
7/2005
Cutter Wheel
(See Wheel Types)
Frame
Roll
Feed Screw
Wear Plug
Roll Pin
Wheel Pin
Roll Housing
WARNING
No. 42-A


Produkt Specifikationer

Mærke: Ridgid
Kategori: Ikke kategoriseret
Model: 424-S

Har du brug for hjælp?

Hvis du har brug for hjælp til Ridgid 424-S stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Ridgid Manualer

Ridgid

Ridgid HKO-186 Manual

31 August 2024
Ridgid

Ridgid Raprench 10 Manual

31 August 2024
Ridgid

Ridgid KT-190 Manual

31 August 2024
Ridgid

Ridgid 760 FXP Manual

30 August 2024
Ridgid

Ridgid 700 Manual

30 August 2024
Ridgid

Ridgid KWIK-SPIN+ Manual

30 August 2024
Ridgid

Ridgid 690-I Manual

30 August 2024
Ridgid

Ridgid 600-I Manual

30 August 2024
Ridgid

Ridgid Power Spin+ Manual

25 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer

Kramer VP-8X8 Manual

25 November 2024
Kramer

Kramer PT-2C Manual

25 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Dometic

Dometic DPS 80 Manual

25 November 2024
Kramer

Kramer 102MX Manual

25 November 2024
Kramer

Kramer FC-18 Manual

25 November 2024
Kramer

Kramer DSP-62-UC Manual

25 November 2024
Tiger

Tiger SKF-H101 Manual

25 November 2024