Ridgid PCB-1250 Manual


Læs nedenfor 📖 manual på dansk for Ridgid PCB-1250 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Blade Installation
1. Place new blade into cutter so that the roller enters the
blade slot.
Figure 3
2. Reinstall “PC-1375” half of the handle.
3. Reinstall and tighten the three mounting screws.
4. Line up the lower handle hole and blade hole. Reinstall
the blade pin and the retaining ring.
Figure 4
PC-1375 Blade Change Instructions
Ridge Tool Co., Elyria, Ohio, U.S.A.
10/07
Printed in U.S.A. 010-338-222.10
Rev. A
PC-1375 Plastic Pipe and Tubing
Cutter Blade Change Instructions
WARNING
• Always wear safety goggles.
• Blade is sharp. Handle with care.
Blade Removal
1. Unlatch the handles so that they are fully open.
2. Remove retaining ring from the blade pin and remove
the blade pin
3. Lay the cutter on a flat surface with the “PC-1375” logo
facing up and remove the screws.
Figure 1
4. Remove the “PC-1375” half of the cutter handle.
5. Remove the blade.
Figure 2 – Blade Removal
Unlatch
Retaining Ring
and Pin
Screws
Install Blade
Over Roller
Unlatch
Retaining Ring
and Pin
Screws


Produkt Specifikationer

Mærke: Ridgid
Kategori: Ikke kategoriseret
Model: PCB-1250

Har du brug for hjælp?

Hvis du har brug for hjælp til Ridgid PCB-1250 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Ridgid Manualer

Ridgid

Ridgid HKO-186 Manual

31 August 2024
Ridgid

Ridgid Raprench 10 Manual

31 August 2024
Ridgid

Ridgid KT-190 Manual

31 August 2024
Ridgid

Ridgid 760 FXP Manual

30 August 2024
Ridgid

Ridgid 700 Manual

30 August 2024
Ridgid

Ridgid KWIK-SPIN+ Manual

30 August 2024
Ridgid

Ridgid 690-I Manual

30 August 2024
Ridgid

Ridgid 600-I Manual

30 August 2024
Ridgid

Ridgid Power Spin+ Manual

25 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer

Kramer VP-8X8 Manual

25 November 2024
Kramer

Kramer PT-2C Manual

25 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Dometic

Dometic DPS 80 Manual

25 November 2024
Kramer

Kramer 102MX Manual

25 November 2024
Kramer

Kramer FC-18 Manual

25 November 2024
Kramer

Kramer DSP-62-UC Manual

25 November 2024
Tiger

Tiger SKF-H101 Manual

25 November 2024