Rossum Electro-Music Mob Of Emus Manual


Læs gratis den danske manual til Rossum Electro-Music Mob Of Emus (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Rossum Electro-Music Mob Of Emus, eller vil du spørge andre brugere om produktet?

Side 1/4
MOB OF EMUS
Polyfunctional Harmonic Sextet
What is this thing?
Mob of Emus is a flexible music and sound
design tool that gives you six channels of
oscillators, noise sources, cyclical and 1-shot
modulators (including LFOs, envelopes, and
various other shapes), sample and holds,
slow random modulators, triggers, rhythm
patterns, and quantization (of both internal
and external signals) in pretty much any
combination (well, any combination of six
channels, anyway).
In addition to being able to independently
program the function of each individual
channel, Mob of EmusHex mode provides
a macro control layer that allows you to
control all of its channels simultaneously
(while, in most cases, maintaining the
relationships of each channel’s independent
programming).
What’s more, Mob of Emus“harmonic
control structure makes it extremely easy
to combine its oscillators into rich additive
timbres, to combine its LFOs into stacked
harmonic low frequency modulation waves,
and to create modulation sources and
triggers with intricate polyrhythmic patterns.
With an external trigger input, six CV inputs
that can operate in six dierent control
modes, six independent outputs, and an
assignable mix output, Mob of Emus can
operate as the heart of an almost unlimited
variety of patches.
And while Mob of Emus’ interface is, by
necessity, rather dense (given all it does),
its eight real-time controls have been
designed to give you immediate hands-on
access to a channel’s (or all six channels’)
key parameters, inviting (and rewarding)
exploration and improvisation.
Finally, Mob of Emus provides 12 preset
locations to save your favorite creations.
Installation
While all Rossum Electro-Music modules
are protected against reverse polarity,
care should still be taken to connect the
power cable correctly.
Plug the 16-pin connector into the
header on the rear of the module such
that the red stripe on the cable (the -12V
side) is on the same end of the header as
the “Red Stripe (-12V)” text on the PCB.
Mob of Emus requires a maximum of
130mA of +12V and 25mA of -12V.
We have included both M3 and M2.5 (for
vector rails) mounting screws. Use what
ts your system. If rack rash is of concern
to you, use the included nylon washers
when mounting Mob of Emus in your
case.
Make some noise!
The quickest way to hear some of what
Mob of Emus can do is to check out
the Presets that come pre-loaded from
the factory. Refer to the Factory Presets
chapter in the manual for descriptions of
what they’re intended to do. Play around
with them.
Then read the manual. Seriously. You’ll be
glad you did.
Thanks for purchasing Mob of Emus. This
guide will get you to the point of creating
some interesting patches, as well as giving
you an overview of what Mob of Emus is
about. But since it does a more than may lot
be obvious from just looking at the panel,
to get the most out of it, you really need to
check out the full owners manual at:
www.rossum-electro.com/support/
documentation
Functional Overview
> MULTI In Hex Mode, control all
channels. Target parameters are as
labeled on the panel.
> FREQ Independently control the
frequency of all six channels.
> TRIG Independently trigger the
individual channels.
> GAIN Independently control the
output amplitude of individual
channels.
> WAVE Independently control the
wave shape of individual channels.
> QUANT Quantize external signals
patched to the CV inputs.
Real-Time Controls
The real-time controls function in a
primary mode (labeled in black) and in
one or two Option modes (Iabeled in
blue). Functions labeled in orange are
active in Hex Mode only.
In individual channel mode:
FREQ/FINE/SEMI Sets a channel’s
frequency over a range of +/- 2 octaves.
Option 1: Fine tune.
Option 2: Constrain to semitones.
OCTAVE/2X Sets a channel’s octave over
a range of +/- 5 octaves.
Option 1: Doubles range to +/- 10 octaves.
WAVE/ENV/PAT Selects a channel’s
waveshape.
Option 1: Selects from a second bank of
shapes, including envelopes.
Option 2: Selects from a third bank of
shapes, including rhythm patterns.
PHASE/SYNC/1S Sets a channel’s phase
oset, from 0–360 degrees.
Option 1: Enables hard sync, with
channel 1 as master.
Option 2: Sets a channel to 1-shot mode.
HARM#/SERIES Sets a frequency
multiplier of 1 to 16.
Option 1: Sets a frequency multiplier of
17 to 32.
Here’s a top-level overview of what Mob of Emus
is all about. Suce it to say that we can only hit
the highlights here. You’ll discover a lot more
magic in the full manual.
TAP/TRIG BUTTON Repeatedly tap to set
frequency. OPTION + TAP triggers all six channels
simultaneously.
TAP/TRIG JACK Mirrors the function of the
associated button or acts to trigger all six
channels.
HEX BUTTON Toggle Hex Mode (LED indicates
state). See back page for additional functions.
CV Inputs
Operate in one of six modes.
Select the mode by double-clicking and holding
OPTION and then clicking the desired preset
button.


Produkt Specifikationer

Mærke: Rossum Electro-Music
Kategori: Ikke kategoriseret
Model: Mob Of Emus

Har du brug for hjælp?

Hvis du har brug for hjælp til Rossum Electro-Music Mob Of Emus stil et spørgsmål nedenfor, og andre brugere vil svare dig