Salus WQ610 Manual


Læs nedenfor 📖 manual på dansk for Salus WQ610 (2 sider) i kategorien Termostat. Denne guide var nyttig for 78 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
AUTO
ON
Quick Guide
The SALUS Quantum WQ610 and WQ610RF thermostats are Boiler Plus compatible
thermostats, designed specically to control central heating boilers and in the case of the RF
versions, electrical panel heaters also. They have our new load compensation (ITLC) software
with Volt free switch and also Opentherm 4.0 connections, so you can choose the method
of control to suit your boiler / installation. Please note that the Boilers need to have an
OpenTherm Association license to be fully compatible with WQ610 range (should you wish
to connect to the OpenTherm terminals A and B). Please verify if this requirement is met with
your Boiler Manufacturer.
Safety Information
Use in accordance with national and EU regulations. Use the device as intended,
keeping it in a dry condition. Product is for indoor use only. Installation must be
carried out by a qualied person in accordance with national and EU regulations.
WARNING! Always ensure the AC mains power is switched off before
installing or working on any components.
This product complies with the essential requirements and other relevant provisions of the
following EU Directives: RED:2014/53/EU and RoHS 2011/65/EU. Full text of the EU Declaration
of Conformity is available on: www.saluslegal.com
WQ610RF: 2405-2480MHz; <14dBm
WQ610 Thermostat WQ610RF Thermostat
Thermostat supply 230VAC Lithium Battery (Rechargable)
Thermostat rating max 3 (1) A -
OpenTherm terminals A / B -
Outputs Voltage free
NO / COM terminals -
Temperature range 5°C – 35°C 5°C – 35°C
Thermostat display accuracy 0.5°C 0.5°C
ErP control class Class V Class V
Radio Frequency -- 2.4 GHz
Dimension [mm] 86 x 86 x 27 [mm] 86 x 86 x 11[mm]
WQ610 Receiver
Receiver supply 230 V AC
Receiver rating max 16 (5) A
OpenTherm terminals A / B
Outputs Voltage free NO / COM terminals
Radio frequency 2.4 GHz
Dimension [mm] 98 x 98 x 32[mm]
12 3 4
5 6
7 8
1. MENU - enter the menu options, press and hold
for 3 seconds to return to main screen without
saving changes.
2. DOWN - decrease the temperature and move
through the menus.
3. UP - increase the temperature and move through
the menus.
4. TICK - conrm changes and enter menus.
Press and hold for 3 seconds to exit User Menu
and save changes. Press and hold to cancel
BOOST feature or temporary override (whilst in
normal screen).
5. ON - When in Manual Mode, ON will
turn the boiler on.
6. OFF - When in Manual Mode, OFF
will turn the boiler o.
7. AUTO - Receiver operates in automatic
mode according to the thermostat.
8. MANUAL - Receiver output is
controlled by the On/O slide switch.
WQ610 / WQ610RF Thermostat WQ610RF Receiver
2
67910
13
12
11
1
3
4
5
8
1. Menu/Settings description
2. Clock 24hr/AM/PM
3. Temperature unit
4. Heating indicator (icon is animating
when there is heating demand)
5. RF Connection indicator
6. Current Temperature / Setpoint
Temperature
7. Holiday mode indicator
8. Temporary override mode
9. Settings icon
10. Battery indicator
11. Schedule program number
12. Schedule mode icon
13. Day indicator/ SET information
The pairing between the thermostat and the receiver is
already done at the factory. However, should you need
to re-pair the units then this can be done using the User
Menu. The link may also be tested from the User Menu
to show pairing link has been successful. Before pairing,
the receiver should be unplugged, then plugged back in.
During the pairing process, the distance between the
Thermostat and the receiver should be at least 1m.
123
Turn the receiver OFF and
ON twice to reset. Ensure
receiver switches are ON and
AUTO. Red LED should be
ashing. Enter thermostat
MENU and scroll down until
you see the “PAIR WITH
RECEIVER option. Select YES
to proceed with Pairing.
Now your thermostat is
looking for the receiver. A 10
minute counter will appear on
the screen.
Upon connecting to the
receiver, the thermostat will
display the message “PAIRING
SUCCESSFUL and return to
normal operation afterwards.
The red LED will stop ashing
when the pairing is successful.
WQ610 / WQ610RF
Technical Specication
LCD Icon Description
Button Functions
WQ610RF: Pairing with the Receiver
Introduction
Product Compliance


Produkt Specifikationer

Mærke: Salus
Kategori: Termostat
Model: WQ610

Har du brug for hjælp?

Hvis du har brug for hjælp til Salus WQ610 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Termostat Salus Manualer

Salus

Salus RT 520 RF Manual

23 September 2024
Salus

Salus T105RF Manual

7 September 2024
Salus

Salus IT800 WIFI Manual

4 September 2024
Salus

Salus HTRP230 Manual

2 September 2024
Salus

Salus PH60-1 Manual

22 August 2024
Salus

Salus HTRS 230 Manual

22 August 2024
Salus

Salus ST320 Manual

22 August 2024
Salus

Salus RT300 Funk Manual

21 August 2024
Salus

Salus RT520RF Manual

20 August 2024
Salus

Salus RT500 Manual

18 August 2024

Termostat Manualer

Nyeste Termostat Manualer