Samsung CS-21V10MJ Manual


Læs nedenfor 📖 manual på dansk for Samsung CS-21V10MJ (36 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/36
COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
REMOTE CONTROL
ON-SCREEN MENUS
ENJOY GAME (depending on the model)
TELETEXT FUNCTION (depending on the model)
5
ENG
Connection Panels
The actual configuration on your TV may be different, depending on
your model.
Rear of TV
A) SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTOR
B) 75COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK
C) RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS
OUTPUT
INPUT
VIDEO AUDIO
OUTPUT
INPUT
VIDEO AUDIO
RCA AUDIO/VIDEO INPUT
CONNECTORS
Front (or Side) of TV
Connecting earphones ( ) /headphones ( )
You can connect a set of earphones/headphones to your television if you wish to watch a
television programme without disturbing the other people in the room.
Prolonged use of earphones/headphones at a high volume may damage your hearing.
INPUT
MONITOR
-OUT
VIDEO AUDIO
INPUT
MONITOR
-OUT
VIDEO
(MONO )
L-AUDIO-R
BA
C
C B
C
BC
B B
8
ENG
You must insert or replace the batteries in the remote control when
you :
Purchase the television.
Find that the remote control is no longer operating
correctly.
1Remove the cover of the remote control by pressing the symbol
( ) and pulling the cover in the direction of the arrow.
2Insert batteries, taking care to respect the polarities:
+on the battery with +on the remote control
-
on the battery with
-
on the remote control
3Replace the cover by pushing it in the direction of the arrow.
To view television channels correctly, a signal must be received by
the set from one of the following sources:
An outdoor aerial
A cable television network
A satellite network
Plug the aerial or cable network input cable to the 75coaxial socket
on the rear of the television.
Inserting the Batteries in the Remote Control
Connecting the Aerial or Cable Television Network
75
Cable
Television
Network
or
Rear of TV
13
ENG
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The number by which you wish to identify each stored
channel.
1Press the MENU ( ) button.
2Press the ▲ ▼or button to select the
Channel
and press the œor
button.
3Press the ▲ ▼or button to select the
Manual Store
and press the
œ √or button.
Result: The
Manual Store
menu is displayed with the
Color
System
selected.
4Press the œ √or button repeatedly until the color is of the best
quality.
Result: The
Color System
is changed (depending on the
model).
AUTO
-
PAL
-
SECAM
-
NTSC4.43
-
NTSC3.58
NTSC4.43 is a “trick” playback mode used by
special VCR’s to play PAL-recorded videos in
NTSC mode.
5Press the ▲ ▼or button to select the
Sound System
and press the
œ √or button repeatedly until the sound is of the best quality.
Result: The
Sound System
is changed (depending on the
model).
B/G
-
I
-
D/K
-
M
If sound does not work regularly after storing
channels, select the sound system which best
corresponds.
6To start the search, select the
Search
and then press the œ √or
button.
Result: The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
7To assign a programme number to the channel, select the
Prog.No.
. Press the button until you find the correctœ √or
number.
8To store the channel and associated programme number, select
the
Store
and press the button.œor
Result:
OK
is displayed.
9 6 8Repeat Steps to for each channel to be stored.
10 When you have finished manual storage, press the EXIT ( )
button or, press the MENU ( ) button repeatedly to return to
normal viewing
Storing the Channels Manually
Channel
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Select Enter Exit
Channel
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Channel
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Channel
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Channel
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Channel
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : OK
Select Adjust Exit
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are
displayed during scanning.
1Press the MENU ( ) button.
2Press the button to select the or
Channel
and press the œor
button.
3Press the button to select the or
Add/Erase
and press the œ
or button.
Result: The
Add/Erase
menu is displayed.
4Press the button to select the required channel.▲ or ▼
5To add or erase the desired channel by pressing the button.œor
6When you have finished adding and erasing channels, press the
EXIT ( ) button or, press the MENU ( ) button repeatedly to
return to normal viewing
14
ENG
Skipping Unwanted Channels
Channel
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Select Enter Exit
Channel
Add/Erase
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
Select Adjust Exit
Channel
Add/Erase
P 1 : Erased
P 2 : Added
P 3 : Added
P 4 : Added
Select Adjust Exit
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have
been automatically stored.
Give easily remembered numbers to the channels that
you watch most often.
1Press the MENU ( ) button.
2Press the button to select the or
Channel
and press the œor
button.
3Press the or button to select the
Sort
and press the œ √or
button.
Result: The
Sort
menu is displayed with the
From
selected.
4Press the œ √or button until the channel number that you wish to
change is displayed.
Result: The selected channel’s picture is displayed.
5Press the button to select the or
To
.
6Press the œ √or button until the new number by which you wish to
identify the channel is displayed.
Result: The selected channel is exchanged with the one
previously stored to the chosen number.
Example: If you select
P 1
for the
From
and
P 3
for the
To
:
Channel 1 becomes channel 3.
Channel 3 becomes channel 1.
7To... Press the...
Confirm the exchange or button to select the
Store
.
of channel numbers button.œor
Result:
OK
is displayed.
You can exchange other
channel numbers by selecting
From
and returning to step 4.
8When you have finished sorting channels, press the EXIT ( )
button or, press the MENU ( ) button repeatedly to return to
normal viewing
16
ENG
Sorting the Stored Channels
Channel
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Select Enter Exit
Channel
Sort
From : P 1
To : P
--
Store : ?
Select Adjust Exit
Channel
Sort
From : P 1
To : P 3
Store : ?
Select Adjust Exit
Channel
Sort
From : P 3
To : P 1
Store : OK
Select Adjust Exit
22
ENG
The “DUAL ” button displays/controls the processing andI-II
output of the audio signal. When power is switched ON, the mode
is automatically preset to either “Dual-I” or “STEREO”, depending
on the current transmission.
Selecting the Sound Mode (depending on the model)
If the receiving conditions deteriorate, listening will be
easier if the mode is set to the
MONO
position using the
DUAL I-II button.
If the stereo signal is weak (or if intermittent Stereo-Mono)
and automatic switching occurs, then switch to the
MONO
mode.
When receiving mono sound in the AV mode, connect to
the “L” input jack on the panels. If the mono sound
comes out only from the left speaker, then press the
DUAL I-II button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
Bilingual or Dual-I/II
Stereo
On-screen indication
MONO (Normal use)
MONO
MONO
NICAM (Normal)
STEREO
MONO
NICAM (Normal)
MONO (Normal use)
Dual-I
Dual-II
STEREO
MONO
(Forced Mono)
Dual- Dual- MONO III
NICAM NICAM (Normal)
NICAM
Stereo
A2
Stereo
24
ENG
You can set the television’s clock so that the current time is displayed
when you press the “INFO ( )” button.
You must also set the time if you wish to use the automatic On/Off
timers.
The clock setting will be re-activated when pressing the
” (ON/OFF) button on the front panel.
1Press the MENU ( ) button.
2Press the ▲ ▼or button to select the
Function
and press the œor
button.
3Press the ▲ ▼or button to select the
Time
, and press the œ √or
button.
Result: The
Time
menu is displayed with the
Clock
selected.
4To... Press the...
Move to the hour or minute button.œor
Set the hour or minute button.or
5When you have finished, press the EXIT ( ) button or, press the
MENU ( ) button repeatedly to return to normal viewing.
6To display the... Press the “INFO ( )” button...
Channel information Once.
Current time Twice.
7To remove the display, press the INFO ( ) button again.
Setting and Displaying the Current Time
(depending on the model)
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Select Enter Exit
Function
Time
Clock 12 : 00 am
Timer Off
Adjust Move Exit
27
ENG
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
“Blue Screen” mode to “Off”.
1Press the MENU ( ) button.
2Press the ▲ ▼or button to select the
Function
and press the œor
button.
3Press the button to select the or
Blue Screen
.
4Press the button to select the required option (On/Off).œor
5When you are satisfied with the settings, press the EXIT ( )
button or, press the MENU ( ) button repeatedly to return to
normal viewing.
Setting the Blue Screen Mode
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Select Adjust Exit
32
ENG
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1Check that all the necessary connections have been made.
2Switch the television on and if necessary, press the VIDEO ( )
button one or more times until the required input is displayed.
Depending on the source selected, the pictures may appear
automatically.
To watch television programmes again, press the TV ( )
button and select the number of the channel required.
Viewing Pictures From External Sources


Produkt Specifikationer

Mærke: Samsung
Kategori: Ikke kategoriseret
Model: CS-21V10MJ

Har du brug for hjælp?

Hvis du har brug for hjælp til Samsung CS-21V10MJ stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Samsung Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer