Samsung LA40D550K7R Manual

Samsung televisión LA40D550K7R

Læs nedenfor 📖 manual på dansk for Samsung LA40D550K7R (164 sider) i kategorien televisión. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/164
E-MANUAL
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _____________ Serial No. _____________
Contents
Channel Menu
• Using Channel menu (Watch TV) 1
• Retuning Channels 11
Basic Features
• Picture Menu 15
• Sound Menu 32
Preference Features
• Network Menu for LCD 550 series and above 40
• System Menu 68
• Support Menu 84
Advanced Features
• My Downloads 90
• Anynet+ 117
• AllShare™ for LCD 550 series and above 131
Other Information
• Analogue Channel Teletext Feature 135
• Anti-theft Kensington Lock 139
• Troubleshooting 141
• Licence 160
English
Using Channel menu (Watch TV)
O
MENU
m
Support Contents HomeENTER
E
Press the button to select CONTENT Watch TV, then select the desired menu.
Each screen will be displayed.
Schedule Manager
OCONTENT Schedule ManagerENTERE
Cancel or set the to display the channel you want at the intended Timer Viewing
time.
Schedule Manager
Channel List
Channel Manager
My Downloads Source
◀ ▶
English
Using Timer Viewing
You can set a desired channel to be displayed automatically at the intended time.
Set the current time first to use this function.
1. Press the ENTERE button to add programme to schedule manually.
2. Press the ◄/►/▲/▼ button to set the , , , .Channel Repeat Date Start Time
◀ ▶
English
Channel: Select the desired channel.
Repeat Once Manual Sat~Sun Mon~Fri Everyday: Select , , , or to set at
your convenience. If you select , you can set the day you want.Manual
NThe (c) mark indicates the day is selected.
Date: You can set the desired date.
NIt is available when you select in .Once Repeat
Start Time: You can set the start time you want.
NIf you want to edit or cancel the schedule, select the reserved schedule on
the Reserved programmes Edit Cancel Schedules, and select the or .
◀ ▶
English
Channel List
O
CONTENT Channel ListENTERE
You can view channel information, or -All Favourites1 5.
NWhen you press the button on the remote control, CH LIST Channel List
screen will be displayed at once.
All: Shows all currently available
channels.
Favourites1-5: Shows all favourite
channels.
NFavourites1-5 will be
displayed when you set Add
to Favourites.
NIf you want to view favourite
channels you added, press the CH LIST button and use L (Ch.Mode) button
to move Favourites 1-5.
L Ch.Mode E Watch k Page
Channel List
All
a1C74
a2 C10
No Information
a3C5
a4C7
a5C27
a6C29
a7C31
a8C34
a9C38
◀ ▶
English
NUsing the remote control buttons with the .Channel List
L
(Ch.Mode): Move to the - when is Favourites 1 5 Add to Favourites
set.
E (Watch / Information): Watches the channel you select. / Displays
details of the selected programme.
k ( ): Move to next or previous page.Page
Channel Status Display Icons
Icon Operations
aAn analogue channel.
\A locked channel.
◀ ▶
English
Channel Manager
O
CONTENT Channel ManagerENTERE
Add or edit the favourite channel and
set the channels to , Lock Edit Channel
Name Delete Deselect All Select , , or
All.
( ) : Shows all currently Channels
available channels.
( ) -Favourites1 5: Shows
favourites channels.
E Select T Tools R Return
Channel Manager All
Selected item: 0 Channel number
* It may differ depending on the model.
a1C74
a3C7
a5C27
a7C31
a9 C38
a11 C41
a2C5
a4 C10
a6C29
a8C34
a10 C40
a12 C51
◀ ▶
English
Channel Status Display Icons
Icon Operations
aAn analogue channel.
cA channel selected.
FA channel set as a favourite.
\A locked channel.
TDisplays the option menu.Channel Manager
◀ ▶
English
Channel Manager Option Menu t
Set each channel using the menu options (Channel Manager Watch, Add to
Favourites/Edit Favourites, Lock/Unlock, Edit Channel Name, Edit Channel
Number, Delete, Select All/Deselect All). Option menu items may differ depending
on the channel status.
1. Select a channel and press the button.TOOLS
2. Select a function and change its settings.
◀ ▶
English
Watch: Watch the selected channel.
Add to Favourites/Edit Favourites: Set channels you watch frequently as
favourites. Add or Delete the selected channel in - .Favourites 1 5
1. Select the , then press the Add to Favourites/Edit Favourites ENTERE
button. Add or Delete the selected channel in - .Favourites 1 5
NIf the channel is already added to favourite channel, will Edit Favourites
be shown.
2. Press the ENTERE button to select -Favourites1 5 OK, then press the
button.
NOne favourite channel can be added in several of Favourites among
Favourites1-5.
◀ ▶
English
Lock/Unlock: Lock a channel so that the channel cannot be selected and viewed.
NNOTE
This function is available only when the is set to .Channel Lock On
The PIN input screen appears. Enter your 4-digit PIN, the default of which
is “0-0-0-0”. Change the PIN using the option.Change PIN
Edit Channel Name: Assign your own channel name.
Edit Channel Number: Edit the number by pressing the number buttons desired.
Deselect All: Deselect all the selected channels.
NYou can only select when one or more channels are selected.Deselect All
Select All: Select all the channels in the channel list.
◀ ▶
English
Retuning Channels
O
MENUm Channel ENTERE
Area
You can change the desired area.
Auto Tuning
(depending on the country)
Scans for a channel automatically and stores in the TV.
NAutomatically allocated programme numbers may not correspond to actual
or desired programme numbers. If a channel is locked, the PIN input window
appears.
◀ ▶
English
Manual Tuning
Scans for a channel manually and stores in the TV.
NIf a channel is locked, the PIN input window appears.
NAccording to channel source, Manual Tuning may be supported.
Programme (0~99) Colour System Sound System Channel Search, , , , : If
there is abnormal sound or no sound, reselect the sound standard required.
Analogue Channel Tuning (Programme, Colour System, Sound System,
Channel, Search): Press the
A
( ) button. If there is abnormal sound or New
no sound, reselect the sound standard required.
◀ ▶
English
Fine Tune
If the signal is weak or distorted, fine tune the channel manually.
NFine tuned channels are marked with an asterisk “*”.
NTo reset the fine-tuning, select .Reset
◀ ▶
English
Changing the Preset Picture Mode
O
MENU
m
Picture Picture Mode ENTER
E
Picture Mode
Select your preferred picture type.
NWhen connecting a PC, you can only make changes to the and Entertain
Standard.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Natural for LCD 550 series and above : Suitable for reducing eye strain.
Movie: Suitable for watching movies in a dark room.
Entertain: Suitable for watching movies and games.
NIt is only available when connecting a PC.
◀ ▶
English
Adjusting Picture Settings
Samsung MagicAngle LCD 450(22”) and 480(22”) series
OMENUm Picture Samsung MagicAngle ENTERE
Adjust screen viewing Angle to optimize screen quality according to your viewing
position.
MagicAngle: When viewing the screen at an angle from below or above by
setting the appropriate mode for each position you can obtain a similar picture
quality as viewing the screen directly from the front.
Off: Select when viewing from the front position.
Lean Back Mode: Select when viewing from a slightly lower position.
Standing Mode: Select when viewing from the upper position.
Mode : Adjust screen viewing angle.
NWhen Samsung MagicAngle is set to Lean Back Mode or Standing Mode,
Gamma is not available.
◀ ▶
English
Screen Adjustment
O
MENUm Picture Screen Adjustment ENTERE
Set the various picture options such as picture size and aspect ratio.
Picture Size: Your cable box/satellite receiver may have its own set of screen
sizes as well. However, we highly recommend you use 16:9 mode most of the
time.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnifies the picture size more than 4:3.
NAdjusts the by using Position , buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
NAdjusts the or by using Position Size , button.
◀ ▶
English
4:3: Sets the picture to basic (4:3) mode.
N
Do not watch in 4:3 format for a long time. Traces of borders displayed
on the left, right and centre of the screen may cause image retention
(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are input.
Smart View1 For LCD 550 series and above : Reduces original screen by 50%.
Smart View2 For LCD 550 series and above : Reduces original screen by 25%.
NNOTE
Smart View 1 is enabled only in HDMI mode.
Smart View 2 is enabled only in DTV and HDMI modes.
The picture size can vary depending on the input resolution when
content is played using under .Videos My Downloads
◀ ▶
English
Position: Adjust the picture position. It is only available in Screen Fit Wide or
Zoom.
Zoom/Position : Adjust the picture position. It is only available in .Zoom
NNOTE
After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i
/ 1080p) mode, you may need to centre the picture:
1. Press the or button to select .Position
2. Press the ENTERE button.
3. Press the , , or button to move the picture.
Depending on the input source, the picture size options may vary.
If you want to reset the position you adjusted, select in the Reset
Position screen. The picture will be set to its default position.
◀ ▶
English
The available items may differ depending on the selected mode.
When connecting a PC, only and modes can be adjusted.16:9 4:3
Settings can be adjusted and stored for each external device connected
to an input on the TV.
If you use the Screen Fit function with HDMI 720p input, 1 line will be cut
at the top, bottom, left and right as in the overscan function.
◀ ▶
English
PC Screen Adjustment
N
It is available in mode.PC
Coarse / Fine: Removes or reduces picture noise. If the noise is not removed
by Fine-tuning alone, then adjust the frequency as best as possible ( ) Coarse
and Fine-tune again. After the noise has been reduced, readjust the picture so
that it is aligned to the centre of screen.
Position: Adjust the PC’s screen positioning if it does not fit the TV screen.
Press the or button to adjust the Vertical-Position. Press the or
button to adjust the Horizontal-Position.
Image Reset: Resets the image to default settings.
◀ ▶
English
Auto Adjustment t
O
MENUm Picture Auto Adjustment ENTERE
Adjust frequency values/positions and fine tune the settings automatically.
NIt is available in mode.PC
NNot available when connecting through HDMI/DVI cable.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card, the actual screens on your
PC will probably look different, but the same basic set-up information will apply in
most cases. (If not, contact your computer manufacturer or Samsung Dealer.)
◀ ▶
English
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control Panel” window and a display
dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
4. Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution)
If a vertical-frequency option exists on your display settings dialog box, the
correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog
box.
◀ ▶
English
Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.
Shadow Detail: Increase the brightness of dark images.
Gamma: Adjust the primary colour intensity.
RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and
Blue colour for making fine adjustments to the hue and saturation.
Colour Space (Auto / Native): Adjust the range of colours available to create
the image.
◀ ▶
English
White Balance: Adjust the colour temperature for a more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colours (red, green, blue)
darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
Reset White Balance: Resets the to it’s default settings.
Flesh Tone: Emphasize pink “Flesh Tone.”
Edge Enhancement (Off / On): Emphasize object boundaries.
Motion Lighting (Off / On): Reduce power consumption by brightness
control adapted motion.
NWhen changing a setting value of Backlight, Contrast, Brightness,
Motion Lighting Off will be set to .
◀ ▶
English
Picture Options
O
MENUm Picture Picture Options ENTERE
NWhen connecting a PC, you can only
make changes to the Colour Tone.
Colour Tone (Cool / Standard /
Warm1 / Warm2)
NWarm1 Warm2 or will be
deactivated when the picture
mode is .Dynamic
NSettings can be adjusted and
stored for each external device
connected to an input on the TV.
U Move E Enter R Return
Picture Options
Colour Tone : Standard
Digital Noise Filter : Auto
MPEG Noise Filter : Auto
HDMI Black Level : Normal
Film Mode : Off
◀ ▶
English
Reset Picture (OK / Cancel)
Resets your current picture mode to its default settings.
◀ ▶
English
Sound Settings
O
MENU
m
SoundENTER
E
Sound Effect
(standard sound mode only)
Use the up and down arrow keys to select an option, and then press ENTERE.
SRS TruSurround HD (Off / On)
This function provides a virtual 5.1 channel surround sound experience
through a pair of speakers using HRTF (Head Related Transfer Function)
technology.
SRS TruDialog (Off / On)
This function allows you to increase the intensity of a voice over background
music or sound effects so that dialog can be heard more clearly.
◀ ▶
English
Speaker Settings
Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to External
Speaker.
NWhen is set to , the volume and Speaker Select External Speaker
MUTE buttons will not operate and the sound settings will be limited.
NWhen is set to .Speaker Select External Speaker
TV Speaker: Off, : OnExternal Speaker
NWhen is set to .Speaker Select TV Speaker
TV Speaker External Speaker: On, : On
NIf there is no video signal both and Headphone will be mute.TV Speaker
◀ ▶
English
Selecting the Sound Mode t
When you set to - , the current sound mode is displayed on the screen.Dual I II
Audio Type - DefaultDual I II
A2 Stereo
Mono Mono
Automatic change
Stereo Stereo Mono
Dual Dual I Dual II Dual I
NICAM Stereo
Mono Mono
Automatic change
Stereo Mono Stereo
Dual Mono Dual I
  Dual II Dual I
N If the stereo signal is weak and an automatic switching, occurs, then switch to
the mono.
NOnly activated in stereo sound signal.
NOnly available when the Source TV is set to .


Produkt Specifikationer

Mærke: Samsung
Kategori: televisión
Model: LA40D550K7R

Har du brug for hjælp?

Hvis du har brug for hjælp til Samsung LA40D550K7R stil et spørgsmål nedenfor, og andre brugere vil svare dig




televisión Samsung Manualer

televisión Manualer

Nyeste televisión Manualer