Samsung MIM-B14 Manual


Læs nedenfor 📖 manual på dansk for Samsung MIM-B14 (4 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
English
EXTERNAL CONTROLLER INSTALLATION
Parts
PRODUCT
NAME
EXTERNAL
CONTROLLER PCB CASE HARNESS WIRES SCREW
QUANTITY 1EA 1EA 1EA for EACH WIRE 2EA
SHAPE
Installation
1. Fix PCB case( ) inside the indoor unit control box or at an appropriate position with screws ( ).
2. After fixing PCB cases, attach the external controller PCB. (See the following figure, Assembly Drawing)
3. Connect 2 pin wire ( ) between the external controller PCB CN83 and indoor unit PCB EXT_CTRL connector(CN83).
4. Connect 4 pin wire ( ) between the external controller PCB CN81 and indoor unit PCB COMP/ERROR
connector(CN81).
Installation option setting of indoor unit
Indoor unit with DIP S/W
Operation Specification according to Indoor Unit PCB installation option Set up
WIRE NO. OUTPUT STATE
K11 OFF K11 & K12 OFF
1,2 Error Check
3,4 COMP. Check Operating Check
5,6 Signal Input (TIMER)
[figure, Assembly Drawing]
SCREW PCB CASE
SCREW fixing
Positions
Screw fixing positions
when necessary
WIRE
WIRE
Align the case locking with the PCB locking
Indoor unit without DIP S/W
Purpose 5, 6 INPUT 3, 4 OUTPUT 1, 2 OUTPUT
Turn on/off the indoor unit via
external contact control DRY CONTACT THERMO ON/OFF or
OPERATION ON/OFF
ERROR STATUS
(Normal Close)
Control external heater External heater’s Switch
Turn on/off the indoor unit via
external contact control and
control external heater
(1*)
DRY CONTACT External heater’s Switch
(*1) When the purpose is to use as external heater’s on/off signal, monitoring signal for external contact control will not
be outputted.
Circuit diagram of external controllers output
For turning on/off the indoor unit via external contact control
AC LAMP
For controlling external heater (On/Off)
Circuit diagram for using external heater for the indoor units without hot water coil terminal
AC
Relay External
Heater
Detailed method about Installation option establishment
refers to Indoor Unit manual. (External contact control
setting: Refer to SGE14, SGE15 of 02 Series installation
option External heater control setting: Refer to SEG15
of 02 Series Installation Option and SEG18 of 05 Series
installation option))
Dry contact(no power source contact) must be be
connected to the input terminal 5,6.
When MIM-B14 is used for controlling external heater, its
contact should not be connected directly to the load.
(Only use as switch as shown in above diagram.)
DB98-26202A-03
SOL MIM-B14 IM-EN,TR_DB98-26202A-03_A5.indd 22-23 2016-06-20 오후 7:48:40


Produkt Specifikationer

Mærke: Samsung
Kategori: Ikke kategoriseret
Model: MIM-B14

Har du brug for hjælp?

Hvis du har brug for hjælp til Samsung MIM-B14 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Samsung Manualer

Samsung

Samsung DA-F680 Manual

10 November 2024
Samsung

Samsung DA-E560 Manual

10 November 2024
Samsung

Samsung MM-UC8H Manual

22 Oktober 2024
Samsung

Samsung HG32AJ570NK Manual

13 Oktober 2024
Samsung

Samsung CS-21A11MH Manual

4 Oktober 2024
Samsung

Samsung MR-EH01 Manual

3 Oktober 2024
Samsung

Samsung CS21A551ML Manual

1 Oktober 2024
Samsung

Samsung Guru 1200 Manual

27 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Gigabyte

Gigabyte ODIN GT 550W Manual

23 November 2024
Stamos

Stamos S-PLASMA 60U Manual

23 November 2024
Velbus

Velbus VMBPIRO-W-20 Manual

23 November 2024
Honor

Honor 90 Pro Manual

23 November 2024
Honor

Honor 80 SE Manual

23 November 2024
Medela

Medela Safe & Dry Manual

22 November 2024
Jane

Jane First Potty Manual

22 November 2024