Samsung UN65EH6000 Manual

Samsung TV UN65EH6000

Læs nedenfor 📖 manual på dansk for Samsung UN65EH6000 (4 sider) i kategorien TV. Denne guide var nyttig for 49 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

Connections

yFor better picture and audio quality, connect to a digital device using an HDMI cable.

yThe picture may not display normally (if at all) or the audio may not work if an external

device that uses an older version of HDMI mode is connected to the TV. If such a problem

occurs, ask the manufacturer of the external device about the HDMI version and, if out of

date, request an upgrade.

yBe sure to purchase a certiﬁed HDMI cable. Otherwise, the picture may not display or a

connection error may occur.

yPC(D-Sub) PC/DVI AUDIO IN and input are not supported.

yFor HDMI/DVI cable connection, you must use the jack. HDMI IN 1(DVI)

yConnecting through the HDMI cable may not be supported depending on the PC.

yIf an HDMI to DVI cable is connected to the port, the audio does not work.HDMI IN 1(DVI)

yEX-LINK: Connector for service only.

Remote Control

✎This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

Figures and illustrations in this User Manual are provided for reference

only and may differ from actual product appearance. Product design and

speciﬁcations may be changed without notice.

Important Warranty Information Regarding

Television Format Viewing

✎See the warranty card for more information on warranty terms.

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to

height) are primarily designed to view wide screen format full-motion video. The

images displayed on them should primarily be in the wide screen 16:9 ratio format,

or expanded to ﬁll the screen if your model offers this feature and the images are

constantly moving. Displaying stationary graphics and images on screen, such as the

dark sidebars on non- expanded standard format television video and programming,

should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports,

video game displays, station logos, web sites or computer graphics and patterns,

should be limited as described above for all televisions. Displaying stationary images

that exceed the above guidelines can cause uneven aging of LED Displays that leave

subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary

the programming and images, and primarily display full screen moving images, not

stationary patterns or dark bars. On LED models that offer picture sizing features,

use these controls to view different formats as a full screen picture. Be careful in the

selection and duration of television formats you use for viewing. Uneven LED aging as

a result of format selection and use, as well as burned-in images, are not covered by

your Samsung limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original

Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the

requirements, conditions, exclusions and limitations contained herein, SAMSUNG

will additionally provide Warranty Repair Service in the United States on SAMSUNG

products purchased in Canada, and in Canada on SAMSUNG products purchased

in the United States, for the warranty period originally speciﬁed, and to the Original

Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized

Service Center. Along with this Statement, the Original Limited Warranty Statement

and a dated Bill of Sale as Proof of Purchase must be presented to the Service

Center. Transportation to and from the Service Center is the responsibility of the

purchaser. Conditions covered are limited only to manufacturing defects in material or

workmanship, and only those encountered in normal use of the product. Excluded, but

not limited to, are any originally speciﬁed provisions for, in-home or on-site services,

minimum or maximum repair times, exchanges or replacements, accessories, options,

upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

–– In the United States : 1-800-SAMSUNG (1-800-726-7864)

–– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such

as TV channel logos, panorama or 4:3 image format, stock or news bars at screen

bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of

LED screen, which will affect image quality. To reduce risk of this effect, please follow

below recommendations:

• Avoid displaying the same TV channel for long periods.

• Always try to display any image on full screen, use TV set picture format menu for

best possible match.

• Reduce brightness and contrast values to minimum required to achieve desired

picture quality, exceeded values may speed up the burnout process.

• Frequently use all TV features designed to reduce image retention and screen

burnout, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to

ensure proper ventilation.

Failing to do so may result in ﬁre or a problem with the product due to an increase in

the internal temperature of the product.

✎When using a stand or wall-mount, use parts provided by Samsung

Electronics only.

xIf you use parts provided by another manufacturer, it may result in a

problem with the product or an injury due to the product falling.

✎The appearance may differ depending on the product.

✎Be careful when you contact the TV because some parts can be somewhat

hot.

Installation with a stand. Installation with a wall-mount.

4inches

Channel Menu

Seeing Channels

Channel List

Add, delete or set Favorite channels and use the program guide for

digital broadcasts. Select a channel in the All Channels, Added

Channels Favorite Programmed, or screen by pressing the ▲

/ buttons, and pressing the ▼ENTER

button. Then you can

watch the selected channel.

Added Channels

6 Air

6-1 ♥ TV #6

7-1 ♥ TV #7

8 Air

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

Air Zoom Select ''T Tools ► Next Program

■

All Channels: Shows all currently available channels.

■

Added Channels: Shows all added channels.

■*

Favorite: Shows all favorite channels.

■

Programmed: Shows all currently reserved programs.

✎Using the remote control buttons with the Channel List

xGreen (Zoom): Enlarges or shrinks a channel number.

xYellow (Select): Selects multiple channel lists. Select desired

channels and press the Yellow button to set all the selected

channels at the same time. The

mark appears to the left of

the selected channels.

( ): Displays the option menu. (The Tools Channel List

Options menus may differ depending on the situation.)

Channel Status Display icons

Icons Operations

A channel selected.

A channel set as a Favorite.

)

A reserved program.

(

A program currently being broadcast.

Memorizing channels

Antenna (Air / Cable)

Before your television can begin memorizing the available channels,

you must specify the type of signal source that is connected to the

TV (i.e. an Air or a Cable system).

Auto Program

✎When selecting the Cable TV system: Selects the cable

system. STD, HRC and IRC identify various types of cable

TV systems. Contact your local cable company to identify the

type of cable system that exists in your particular area. At this

point, the signal source has been selected.

✎After all the available channels are stored, it starts to

remove scrambled channels. The menu then Auto program

reappears.

✎Press the ENTER

button to stop the channel store during

Auto Program.

How to Stop Auto Programming

1. Press the ENTER

button.

2. Stop Auto Program?A message will ask Select Yes by

pressing the or button.◄ ►

3. Press the ENTER

button.

Other Features

Clear Scrambled Channel

This function ﬁlters out scrambled channels after is Auto Program

completed. This process may take up to 20~30 minutes.

✎Press the ENTER

button to stop the Clear Scrambled

Channel.

✎This function is only available in mode. Cable

Channel List

Channel List Option Menu

Set each channel using the menu options. Option Channel List

menu items may differ depending on the channel status.

■

Add / Delete: Delete or add a channel to display the channels

you want.

✎All deleted channels will be shown on the All Channels

menu.

✎A gray-colored channel indicates the channel has been

deleted.

✎The menu only appears for deleted channels.Add

✎Delete a channel from the Added Channels or Favorite

menu in the same manner.

■

Add to Favorite / Delete from Favorite

: Set channels

you watch frequently as Favorites.

■

Timer Viewing: You can set a desired channel to be displayed

automatically at the set time; even when you are watching

another channel. Set the current time ﬁrst to use this function.

✎Only memorized channels can be reserved.

✎Reserved programs will be displayed in the Programmed

menu.

✎When a digital channel is selected, press the (►Next

Program) button to view the digital program. If you select

the ENTER

( ) button on the next program, you Schedule

can set Timer Viewing directly.

■

Channel Name Edit (analog channels only): Assign your own

channel name.

■

Select All: Select all the channels in the channel list.

■

Deselect All: Deselect all the selected channels.

✎You can only select Deselect All when one or more

channels are selected.

■

Auto Program: Scans for a channel automatically and stores in

the TV

Programmed

(in )Channel List

You can view, modify or delete a show you have reserved to watch.

■

Change Info: Change a show you have reserved to watch.

■

Cancel Schedules: Cancel a show you have reserved to watch.

■

Information: Display a show you have reserved to watch. (You

can also change the reservation Information.)

■

Select All / Deselect All: You can select or deselect all channels

in the channel list.

Sound Menu

Mode

■

Standard: Selects the normal sound mode.

■

Music: Emphasizes music over voices.

■

Movie: Provides the best sound for movies.

■

Clear Voice: Emphasizes voices over other sounds.

■

Amplify: Increase the intensity of high-frequency sounds to allow a

better listening experience for the hearing impaired.

Equalizer

(standard sound mode only)

■

Balance L/R: Adjusts the balance between the right and left

speaker.

■

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):

Adjusts the level of speciﬁc bandwidth frequencies.

■

Reset: Resets the equalizer to its default settings.

SRS TruSurround HD

(standard sound mode only)

SRS TruSurround HD is a patented SRS technology that solves the

problem of playing 5.1 multichannel content over two speakers.

TruSurround delivers a compelling, virtual surround sound experience

through any two-speaker playback system, including internal

television speakers. It is fully compatible with all multichannel formats.

Preferred Language

(digital channels only)

Digital-TV broadcasts are capable of simultaneous transmission of

many audio tracks (for example, simultaneous translations of the

program into foreign languages).

✎You can only select a language from among the ones being

broadcasted.

Multi-Track Sound (MTS)

(analog channels only)

■

Mono: Choose for channels that are broadcasting in mono or if

you are having difﬁculty receiving a stereo signal.

■

Stereo: Choose for channels that are broadcasting in stereo.

■

SAP: Choose to listen to the Separate Audio Program, which is

usually a foreign-language translation.

✎Depending on the program being broadcast, you can listen to

Mono, Stereo or SAP.

Auto Volume

Because each broadcasting station has its own signal conditions,

the volume may ﬂuctuate each time channel is changed. This feature

lets you automatically adjust the volume of the desired channel by

lowering the sound output when the modulation signal is high or by

raising the sound output when the modulation signal is low.

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed

digital audio signal when you connect the digital audio jack on the

back of the TV to a digital audio in jack on a receiver or home theater.

■

Audio Format: You can select the Digital Audio output (SPDIF)

format. The available Digital Audio output (SPDIF) format may differ

depending on the input source.

✎By connecting the T V to a receiver or home theater with Dolby

Digital and 5.1ch speakers and selecting Dolby Digital, you

can maximize your interactive 3D sound experience.

■

Audio Delay: Lets you correct timing mismatches between the

audio track and the video when you are watching the TV and

listening to digital audio output from the TV through an external

device such as an AV receiver. When you select , a Audio Delay

slider appears. Use the left and right arrow buttons to adjust the

slider. Press ENTER

when done (0ms ~ 250ms).

Speaker Select

■

Speaker Select (External Speaker / TV Speaker): If you are

listening to the sound track of a broadcast or movie through an

external receiver, you may hear a sound echo caused by the

difference in decoding speed between the TV’s speakers and the

speakers attached to your audio receiver. If this occurs, set the TV

to .External Speaker

✎When you set Speaker Select to External Speaker, the

TV’s speakers are turned off. You will hear sound through the

external speakers only. When you set Speaker Select to TV

Speaker both the TV’s speakers and the external speakers

are on. You will hear sound through both.

✎When Speaker Select External Speaker is set to , the

VOLUME and MUTE buttons will not operate and the sound

settings will be limited.

✎If there is no video signal, both the T V’s speakers and the

external speakers will be mute.

Sound Reset

■

Reset All: Resets all sound settings to the factory defaults.

Setup Menu

Setting the Time

Time

✎The current time will appear every time you press the INFO

button.

■

Clock: Setting the clock is for using various timer features of the

TV.

✎If you disconnect the power cord, you have to set the clock

again.

Clock Mode: Set the current time manually or automatically.

Clock Set Month Day Year Hour Minute am/pm: Set the , , , , and .

✎Available only when Clock Mode is set to Manual.

Time Zone: Select your time zone.

DST (Daylight Saving Time): Switches the DST (Daylight Saving

Time) function on or off.

✎DST and function is only available when the Time Zone

Clock Mode is set to .Auto

■

Sleep Timer

Automatically shuts off the TV after a preset period of time. (30,

60, 90, 120, 150 and 180 minutes).

✎To cancel the Sleep Timer, select Of f.

Timer 1 / Timer 2 / Timer 3

Three different on / off timer settings can be made. You must set the

clock ﬁrst.

■

On Time / Off Time: Set the hour, minute, am/pm and Activate /

Inactivate. (To activate the timer with the setting you have chosen,

set to .)Activate

■

Volume: Set the desired volume level.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung

products, please contact the SAMSUNG customer care center.

Country CANADA U.S.A

Address

Samsung Electronics

Canada Inc., Customer

Service 55 Standish

Court Mississauga,

Ontario L5R 4B2

Canada

Samsung Electronics

America, Inc.

85 Challenger Road

Ridgeeld Park, NJ

07660-2112

Customer Care

Center



1-800-SAMSUNG(726-7864)

Web Site

www.samsung.com

LED TV

user manual

Getting Started

Accessories

• Remote Control (AA59-00600A) &

Batteries (AAA x 2)

• Warranty Card / Safety Guide

• Owner’s Instructions

• Power Cord

• Wire Holder Stand (BN61-05491A)

Input Cables (Sold Separately)

• RS232 (AA39-00311A)

• Audio

• HDMI

• HDMI-DVI

• Component

• Composite (AV)

• Coaxial (RF)

✎Check the cable before plug-in

Cable Ports

HDMI

USB

Optical

Do not plug cable upside down.

Be sure to check before plug-in.

TV Controller (Panel Key)

Power on Turns the TV on by pressing the controller in standby mode.

Adjusting the volume Adjusts the volume by moving the controller from side to

side when the power is on.

Selecting a channel Selects a channel by moving the controller up and down

when the power is on.

Using the function menu

Press the controller when the power is on, then the function

menu screen appears. If you press it again, the function

menu screen disappears.

Selecting the Media Play

Selects the by moving the controller in the MEDIA.P

function menu screen. The main screen Media Play

appears.

Selecting the MENU (m)

Selects the ) by moving the controller in the MENU(m

function menu screen. The OSD(On Screen Display) of your

TV’s feature appears.

Selecting the Source

List (s)

Selects the ( ) by moving the controller in the Source List s

function menu screen. The screen appears.Source List

Power Off (

)Selects the Power Off (

) to turn the TV off by moving the

controller in the function menu screen.

✎Exits the menu when pressing the controller more than 1 second.

✎When selecting the function by moving the controller to the up/down/lef t/

right directions, be sure not to press the controller. If you press it first, you

cannot operate it to move the up/down/left/right directions.

Plug & Play (Initial Setup)

When you turn the TV on for the ﬁrst time, a sequence of on-screen

prompts will assist in conﬁguring basic settings. Press the POWER

button. is available only when the Input source is set to Plug & Play

TV.

✎Connecting the power cord and antenna. (refer to

‘Connections’)

Selecting a language

Select Language of the OSD.

Language

Move

Enter

Plug & Play







English

Español

Français

Select the desired OSD (On Screen

Display) language.



Selecting a Home Use mode

Select ‘Home Use’ when installing this TV in your home.

Move

Enter

Plug & Play

Home UseStore Demo









• Select the mode. Home Use Store

Demo mode is for retail environments.

• When pressing TV controller, the

function menu screen appears. Select

the MENU(m) and press it more than 5

seconds using the controller. The Store

Demo Store mode is set. Cancel the

Demo by selecting Source List( ) s

and pressing it more than 5 seconds.



Selecting an antenna

Select the Antenna source to memorize.

Air Start

Cable Start

Auto Start

Move

Enter

Skip

Plug & Play







In Cable mode, you can select the correct

signal source among , and STD HRC, IRC

by pressing the or ▲, ▼, ◄ ► button.



Setting the Clock Mode

Set the Clock Mode.

Clock Mode : Auto

Plug & Play

Enter

Skip





Set the automatically or Clock Mode

manually.

• If you select the Auto, set the

DST(Daylight Saving Time).

• On the DST screen, press ENTER

then select whether to turn DST

(Daylight Savings Time) on or off. Select

the time zone where you live.



Viewing the HD Connection Guide

The connection method for the best HD screen quality is displayed.



Enjoy your TV.

Press the ENTER

button.

Changing the Input Source

Source List

Use to select TV or an external input source such as a DVD player /

Blu-ray player / cable box / STB satellite receiver.

1. Press the button.SOURCE

2. Select a desired external input source.

■

TV / AV / Component / HDMI1/DVI / HDMI2

✎You can only choose external devices that are connected to the

TV. In the , connected inputs will be highlighted.Source List

How to use Edit Name

Edit Name lets you associate a device name to an input source. To

access , press the button in Edit Name TOOLS Source List. The

following selections appear under :Edit Name

■

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV

Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV

/ Blu-ray / HD DVD / DMA: Name the device connected to the

input jacks to make your input source selection easier.

✎When connecting a PC to the HDMI IN 1(DVI) port with HDMI

cable, you should set the T V to PC mode under .Edit Name

✎When connecting a PC to the HDMI IN 1(DVI) port with HDMI

to DVI cable, you should set the T V to mode under DVI PC Edit

Name.

✎When connecting an AV devices to the HDMI IN 1(DVI) port

with HDMI to DVI cable, you should set the TV to DVI mode

under Edit Name.

Information

You can see detailed information about the connected external

device.

HDMI OUT

AUDIO OUT

R-AU DIO-L

VIDEO OUT OPTICAL

ANT OUT

W R BR

R W R B RG

W YR

R W RY

R W

AUDIO IN

R-AU DIO-L

AUDIO OUT

R-AU DIO-L

COMPONENT OUT

PPYR B

DVI OUT

DVD / Home Theater

VCR Blu-ray player

Cable

Power Input

TV Rear Panel

TV Side Panel

VHF/UHF Antenna

Audio Device (1)

Using an Audio (Analog) Cable

Audio Device (2)

Using an Optical (Digital) Cable

AV Device (2)

Using an Audio/Video

AV Device (3)

Using a Component Cable

(up to 1080p)

Media Play

Using a USB Drive

Using a HDMI (to DVI) Cable

Blu-ray player / DVD / cable box /

sat box

AV Device (1)

Using a HDMI Cable (up to 1080p)

Digital Audio System

■

Contents On Time: When the is activated, you can turn on a

speciﬁc channel or play back contents such as photo or audio

ﬁles.

- TV/USB: Select or . (Make sure that an USB device is TV USB

connected to your TV.)

- Antenna: Displays the current antenna source.

- Channel: Select the desired channel.

- Music/Photo: Select the folder containing MP3/JPEG les on

the USB device.

✎The maximum displayed number of files, including sub

folders, in one folder of USB storage device is 2000.

✎The media may not be playing smoothly when using the

device lower than USB 2.0.

■

Repeat Once Everyday Mon~Fri Mon~Sat: Select , , , ,

Sat~Sun Manual or to set at you convenience. If you select

Manual, you can set up the day you want to activate the timer.

Other Features

Program Rating Lock

The feature automatically locks out Program Rating Lock

programs that are deemed inappropriate for children. The user

must enter a PIN (personal identication number) before any of the

Program Rating Lock restrictions are set up or changed.

✎Program Rating Lock is not available in HDMI or

Component mode.

✎The default PIN number of a new TV set is “0-0-0-0”.

■

Program Rating Lock: You can block rated TV Programs.

■

TV Parental Guidelines: You can block TV programs

depending on their rating. This function allows you to control

what your children are watching.

■

MPAA Rating: You can block movies depending on their MPAA

rating. The Motion Picture Association of America(MPAA) has

implemented a rating system that provides parents or guardians

with advanced information on which ﬁlms are appropriate for

children.

■

Canadian English: You can block TV programs depending on

their Anglophone Canadian.

■

Canadian French: You can block TV programs depending on

their French Canadian rating.

■

Downloadable U.S. Rating: Parental restriction information can

be used while watching DTV channels.

■

Change PIN: The Change PIN screen will appear. Choose any

4 digits for your PIN and enter it in . Re-enter Enter New PIN

the same 4 digits in Conﬁrm New PIN. When the Change

PIN screen disappears, press the OK button. The TV has

memorized your new PIN.

✎If you forget the PIN, press the remote-control buttons in

the following sequence, which resets the pin to “0-0-0-0” :

POWER POWER (off) → MUTE 8 →→→→ 2 4 (on)

Language

Set the menu language.

✎Choose between English, and Español Français.

Game Mode

When connecting to a game console such as PlayStation™ or

Xbox™, you can enjoy a more realistic gaming experience by

selecting the game menu.

✎Precautions and limitations for game mode

xTo disconnect the game console and connect another external

device, set Game Mode to Off in the setup menu.

xIf you display the T V menu in Game Mode, the screen shakes

slightly.

✎Game Mode is not available when the input source is set

to TV.

✎After connecting the game console, set Game Mode to On.

Unfortunately, you may notice reduced picture quality.

Caption

(On-Screen Text Messages)

■

Caption: You can switch the caption function on or off. If

captions are not available, they will not be displayed on the

screen.

✎The feature does not work in or Caption Component

HDMI mode.

■

Caption Mode: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The

Analog Caption function operates in either analog TV channel

mode or when a signal is supplied from an external device to

the TV. (Depending on the broadcasting signal, the Analog

Caption function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4:

(digital channels only) The Digital Captions function works with

digital channels.

✎Service1~6 may not be available in digital caption mode

depending on the broadcast.

■

Digital Caption Options: (digital channels only)

Size: Options include Default, Small, Standard and Large. The

default is Standard.

Font Style: Options include Default and Styles 0 to 7. The

default is Style 0.

Foreground Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan.

You can change the color of the letter. The default is White.

Background Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

background color of the caption. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options

include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption

background. Options include Default, Transparent, Translucent,

Solid and Flashing.

Return to Default: This option sets each Size, Font Style,

Foreground Color, Background Color, Foreground Opacity and

Background Opacity to its default.

✎Digital Caption Options are available only when Default

and can be selected in Service1 ~ Ser vice6 Caption

Mode.

✎The Foreground and Background cannot be set to have

the same color.

Melody

Set so that a melody plays when the TV is turned on or off.

✎The Melody does not play.

xWhen no sound is output from the TV because the MUTE

button has been pressed.

xWhen no sound is output from the TV because the volume has

been reduced to minimum with the VOL – button.

xWhen the TV is turned off by Sleep Timer function.

Auto Protection Time

■

Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10

hours): If the screen remains idle with a still image for a certain

period of time deﬁned by the user, the screen saver is activated

to prevent the formation of ghost images on the screen.

Press to select additional channels (digital) being

broadcasted by the same station. For example,

to select channel ‘54-3’, press ‘54’, then press

‘-’ and ‘3’.

Returns to the previous channel.

Press to directly access to channels.

Turns the TV on and off.

Displays and selects the available video

sources.

Use these buttons in a speciﬁc feature.

P.SIZE: Lets you choose the picture size.

MTS: Press to choose stereo, mono or Separate Audio

Program (SAP broadcast).

CC: Controls the caption decoder.

Cuts off the sound temporarily.

Automatically shuts off the TV at a preset

time.

Displays the channel list on the screen.

Displays information on the TV screen.

Quickly select frequently used functions.

Selects the on-screen menu items and changes the

values seen on the menu.

Exit the menu.

Returns to the previous menu.

Turns the remote control light on or off. When

on, the buttons become illuminated for a

moment when pressed. (Using the remote

control with this button set to On will reduce

the battery usage time.)

Use these buttons according to the

direction on screen.

Changes channels.

Displays the main on-screen menu.

Views the Media Play.

Adjusts the volume.

MEDIA.P SLEEP

yThe side panel may differ depending on the model.

- 2 -- 1 -

- 6 -- 5 -

- 3 -

- 7 -

- 4 -

- 8 -

BN68-04572B-00

Display Modes (HDMI/DVI Input)

Optimal resolution is 1920 x 1080@60Hz.

Mode Resolution Horizontal

Frequency (KHz)

Vertical Frequency

(Hz)

Pixel Clock

Frequency (MHz)

Sync Polarity

(H / V)

IBM 640 x 350 31.469 70.086 25.175 +/-

720 x 400 31.469 70.087 28.322 -/+

MAC

640 x 480 35.000 66.667 30.240 -/-

832 x 624 49.726 74.551 57.284 -/-

1152 x 870 75.062 68.681 100.000 -/-

VESA DMT

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/-

640 x 480 37.500 75.000 31.500 -/-

800 x 600 +/+37.879 60.317 40.000

800 x 600 50.000 +/+48.077 72.188

800 x 600 +/+46.875 75.000 49.500

1024 x 768 48.363 60.004 65.000 -/-

1024 x 768 56.476 70.069 75.000 -/-

1024 x 768 60.023 75.029 78.750 +/+

1152 x 864 67.500 75.000 108.000 +/+

1280 x 720 45.000 74.250 60.000 +/+

1280 x 800 49.702 83.500 59.810 -/+

1280 x 1024 63.981 60.020 108.000 +/+

1280 x 1024 79.976 75.025 135.000 +/+

1366 x 768 47.712 59.790 85.500 +/+

1440 x 900 55.935 59.887 106.500 -/+

1600 x 900RB 60.000 60.000 108.000 +/+

1680 x 1050 -/+ 65.290 59.954 146.250

1920 x 1080 67.500 148.500 60.000 +/+

Installing batteries (Battery size: AAA)

✎NOTE

xUse the remote control within 23 feet from TV.

xBright light may affect the performance of the remote control.

Avoid use when nearby fluorescent lights or neon signs.

xThe Color and shape may vary depending on the model.

Channel Mode

Change the channel mode directly between and Added Channels

Favorite Channels.

✎The Favorite Channels is enabled only when you set Add to

Favorite.

Fine Tune

(analog channels only)

If the reception is clear, you do not have to ﬁne tune the channel, as

this is done automatically during the search and store operation. If the

signal is weak or distorted, ﬁne tune the channel manually.

✎Fine tuned channels that have been saved are marked with an

asterisk “*” on the right-hand side of the channel number in the

channel banner.

✎To reset the fine-tuning, select .Reset

Picture Menu

Mode

Select your preferred picture type.

✎When connecting a PC, you can only select and Entertain

Standard.

■

Dynamic: Suitable for a bright room.

■

Standard: Suitable for a normal environment.

■

Movie: Suitable for watching movies in a dark room.

■

Entertain: Suitable for watching movies and games.

✎Only available when connecting a PC.

Backlight / Contrast / Brightness / Sharpness /

Color / Tint (G/R)

Your television has several setting options for picture quality control.

✎When connecting a PC, you can only make changes to

Backlight, Contrast, Brightness and Sharpness

Advanced Settings

(available in mode)Standard / Movie

Compared to previous models, new Samsung TVs have a more

precise picture.

✎When connecting a PC, you can only make changes to Gamma

and White Balance.

■

Color Space (Auto / Native): Adjusts the range of colors available

to create the image.

■

White Balance: Adjusts the color temperature for a more natural

picture.

R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green,

blue) darkness.

R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue)

brightness.

Reset White Balance: Resets the to it’s default settings.

■

Gamma: Adjusts the primary color intensity.

■

Dynamic Contrast (Off / Low / Medium / High): Adjusts the

screen contrast.

■

Black Tone (Off / Dark / Darker / Darkest): Select the black level

to adjust the screen depth.

■

Flesh Tone: Emphasize pink “esh tone”.

■

Motion Lighting (Off / On): Reduce power consumption by

brightness control adapted motion.

✎Available in Standard mode only.

Picture Options

✎When connecting a PC, you can only make changes to the

Color Tone HDMI Black Level, Size and .

■

Color Tone (Cool / Standard / Warm1 / Warm2)

✎Warm1 or will be deactivated when the picture mode Warm2

is .Dynamic

■

Size: Your cable box/satellite receiver may have its own set of

screen sizes as well. However, we highly recommend you use 16:9

mode most of the time.

16:9: Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magniﬁcation.

Zoom2: Use for a stronger magniﬁcation.

Wide Fit: Enlarges the aspect ratio of the picture to ﬁt the entire

screen.

4:3: Sets the picture to basic (4:3) mode.

✎Do not watch in 4:3 format for a long time. Traces of borders

displayed on the left, right and center of the screen may

cause image retention (screen burn) which are not covered

by the warranty.

Screen Fit (DTV): Displays the full image without any cut-off when

HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p)

signals are inputted.

✎HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p

(1280x720)

✎Settings can be adjusted and stored for each external device

you have connected to an input on the TV.

✎Picture Sizes available by Input Source:

Input Source Picture Size

ATV, AV, Component (480i, 480p) 16:9, Zoom1 Zoom2 4:3, ,

DTV(1080i, 1080p), Component

(1080i, 1080p), HDMI (720p, 1080i,

1080p)

16:9, Wide Fit 4:3 Screen Fit, ,

■

Digital Noise Filter (Off / Low / Medium / High / Auto): If the

broadcast signal received by your TV is weak, you can activate the

Digital Noise Filter feature to reduce any static and ghosting that

may appear on the screen.

✎When the signal is weak, try other options until the best

picture is displayed.

■

HDMI Black Level (Normal / Low): Selects the black level on the

screen to adjust the screen depth.

✎Available only in HDMI mode (RGB signals).

■

Film Mode (Off / Auto): Sets the TV to automatically sense and

process ﬁlm signals from all sources and adjusts the picture for

optimum quality.

✎Available in ATV, DTV(interlace), AV, COMPONENT (480i /

1080i) and HDMI (480i / 1080i).

■

Auto Motion Plus (Off / Clear / Standard / Smooth / Custom /

Demo): Enhances motion in fast moving scenes.

✎The info screen on your TV displays the resolution and

frequency of the incoming video signal (60Hz). This displayed

frequency is not what the TV is displaying by using the Auto

Motion Plus function.

■

LED Motion Plus (Off / On): Removes drag from fast scenes with

a lot of movement to provide a clear picture.

Picture Reset

Resets your current picture mode to its default settings.

■

Reset Picture Mode: Returns all picture values in the currently

selected mode to the default settings.

Remote control sensor

TV Controller

Function menu

MEDIA.P

m R s

Return

Produkt Specifikationer

Mærke:	Samsung
Kategori:	TV
Model:	UN65EH6000
Tænd-/slukkontakt:	Ja
Vekselstrømsindgangsspænding:	110 - 120 V
Vekselstrømsindgangsfrekvens:	60 Hz
Brugervejledning:	Ja
Produktfarve:	Sort
Pakkevægt:	40279 g
Pakkedybde:	238.7 mm
Pakkebredde:	1826.2 mm
Pakkehøjde:	1003.3 mm
Skærm diagonal:	65 "
Skærmopløsning:	1920 x 1080 pixel
Wi-Fi:	Ingen
Bluetooth:	Ingen
HD-type:	Fuld HD
Naturligt aspektforhold:	16:9
Understøttede videotilstande:	1080p
Indbyggede højttaler(e):	Ja
Tuner type:	Analog & digital
Smart TV:	Ja
Antal højttalere:	2
Udgangseffekt (RMS):	20 W
Automatisk lydstyrkejustering:	Ja
Lydafkodningsteknologier:	Dolby Digital Plus, Dolby Digital Pulse
Lyddekodere:	Dolby Digital
Antal HDMI-porte:	2
DVI-port:	Ingen
Antal USB 2.0-porte:	1
Komponentvideo (YPbPr/YCbCr) indgang:	1
Digital akustisk og optisk udgang:	1
Ethernet LAN:	Ingen
Skærmvisning (OSD):	Ja
VESA montering:	Ja
Panel montering grænseflade:	400 x 400 mm
Strømforbrug (standby):	0.3 W
Strømforbrug (typisk):	90 W
Bredde (uden stativ):	1483.3 mm
Dybde (uden stativ):	96.5 mm
Højde (uden stativ):	873.7 mm
Vægt (uden stativ):	28304 g
Bredde (med stativ):	1483.3 mm
Dybde (med stativ):	330.2 mm
Højde (med stativ):	927 mm
Vægt (med stativ):	32522 g
Batterier inkluderet:	Ja
Understøttede grafikopløsninger:	1920 x 1080 (HD 1080)
Bevægelsesinterpolationsteknologi:	CMR (Clear Motion Rate)
Indgang til pc'en (D-Sub):	Ingen
Fjernbetjening inkluderet:	Ja
Certificering:	ENERGY STAR 6.0
Strømforbrug (maks.):	190 W
Billedbehandlingsteknologi:	Samsung Wide Color Enhancer
Bæredygtighedscertifikater:	ENERGY STAR
Desktop beslag:	Ja
Garantibevis:	Ja