Samsung WW70M64FOPW Manual

Samsung Vaskemaskine WW70M64FOPW

Læs nedenfor 📖 manual på dansk for Samsung WW70M64FOPW (136 sider) i kategorien Vaskemaskine. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/136
Washing Machine
User manual
WW90M6***** / WW70M6*****
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 1 2019/8/22 13:42:03
2 English
Contents
Contents
Safety information 4
What you need to know about the safety instructions 4
Important safety symbols 4
Important safety precautions 5
Critical installation warnings 6
Installation cautions 8
Critical usage warnings 8
Usage cautions 10
Critical cleaning warnings 13
Installation 14
What’s included 14
Installation requirements 16
Step-by-step installation 18
Before you start 26
Initial settings 26
Laundry guidelines 26
Detergent drawer guidelines 30
Operations 33
Control panel 33
Simple steps to start 35
Cycle overview 36
Special features 39
Settings 41
SmartThings 42
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 2 2019/8/22 13:42:03
English 3
Contents
Maintenance 47
Eco drum clean+ 47
Smart Check 48
Emergency drain 49
Cleaning 50
Recovery from freezing 54
Care against an extended time of disuse 54
Troubleshooting 55
Checkpoints 55
Information codes 59
Specications 63
Fabric care chart 63
Protecting the environment 64
Specication sheet 65
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 3 2019/8/22 13:42:04
4 English
Safety information
Safety information
Congratulations on your new Samsung washing machine. This manual contains important
information on the installation, use and care of your appliance. Please take some time to read
this manual to take full advantage of your washing machines many benets and features.
What you need to know about the safety instructions
Please read this manual thoroughly to ensure that you know how to safely and efciently
operate the extensive features and functions of your new appliance. Please store the manual
in a safe location close to the appliance for future reference. Use this appliance only for its
intended purpose as described in this instruction manual.
Warnings and Important Safety Instructions in this manual do not cover all possible
conditions and situations that may occur. It is your responsibility to use common sense,
caution and care when installing, maintaining and operating your washing machine.
Because the following operating instructions cover various models, the characteristics of your
washing machine may differ slightly from those described in this manual and not all warning
signs may be applicable. If you have any questions or concerns, contact your nearest service
centre or nd help and information online at www.samsung.com.
Important safety symbols
What the icons and signs in this user manual mean:
WARNING
Hazards or unsafe practices that may result in severe personal injury, death and/or property
damage.
CAUTION
Hazards or unsafe practices that may result in personal injury and/or property damage.
NOTE
Indicates that a risk of personal injury or material damage exists.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 4 2019/8/22 13:42:04
English 5
Safety information
These warning signs are here to prevent injury to yourself and others.
Please follow them explicitly.
After reading this manual, store it in a safe place for future reference.
Read all instructions before using the appliance.
As with any equipment that uses electricity and moving parts, potential hazards exist. To
safely operate this appliance, familiarise yourself with its operation and exercise care when
using it.
Important safety precautions
WARNING
To reduce the risk of re, electric shock, or injury to persons when
using your appliance, follow basic precautions, including the following:
1. This appliance is not to be used by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
2. For use in Europe: This appliance can be used by children aged from
8 years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
3. Children should be supervised to ensure that they do not play with
the appliance.
4. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied persons in order
to avoid a hazard.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 5 2019/8/22 13:42:04
6 English
Safety information
Safety information
5. The new hose-sets supplied with the appliance are to be used and
old hose-sets should not be reused.
6. For appliances with ventilation openings in the base, a carpet must
not obstruct the openings.
7. For use in Europe: Children of less than 3 years should be kept away
unless continuously supervised.
8. CAUTION: In order to avoid a hazard due to inadvertent resetting of
the thermal cut-out, this appliance must not be supplied through an
external switching device, such as a timer, or connected to a circuit
that is regularly switched on and off by the utility.
9. This appliance is intended to be used in household only and it is not
intended to be used such as:
staff kitchen areas in shops, ofces and other working
environments;
farm houses;
by clients in hotels, motels and other residential type
environments;
bed and breakfast type environments;
areas for communal use in blocks of ats or in launderettes.
Critical installation warnings
WARNING
The installation of this appliance must be performed by a qualied technician or service
company.
• Failure to do so may result in electric shock,re, an explosion, problems with the product,
or injury.
The appliance is heavy, therefore take care when lifting it.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 6 2019/8/22 13:42:04
English 7
Safety information
Plug the power cord into a wall socket that meets local electrical specications. Use the
socket for this appliance only, and do not use an extension cord.
• Sharing a wall socket with other appliances using a power strip or extending the power
cord may result in electric shock or re.
• Ensure that the power voltage, frequency, and current are the same as those of the
product specications. Failure to do so may result in electric shock or re. Plug the power
plug into the wall socketrmly.
Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.
• Unplug the power plug and clean it with a dry cloth.
• Failure to do so may result in electric shock or re.
Plug the power plug into the wall socket so that the cord is running towards the oor.
• If you plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or re.
Keep all packaging materials out of the reach of children as these may be dangerous.
• If a child places a bag over its head, it may suffocate.
When the appliance, power plug or power cord is damaged, contact your nearest service
centre.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
• This may result in electric shock,re, an explosion, or problems with the product.
• Never plug the power cord into a socket that is not grounded correctly and make sure
that it is in accordance with local and national regulations.
Do not install this appliance near a heater or any inammable material.
Do not install this appliance in a humid, oily or dusty location, or in a location exposed to
direct sunlight or water (rain drops).
Do not install this appliance in a location exposed to low temperatures.
• Frost may cause the tubes to burst.
Do not install this appliance in a location where gas may leak.
• This may result in electric shock or re.
Do not use an electric transformer.
• This may result in electric shock or re.
Do not use a damaged power plug, damaged power cord, or loose wall socket.
• This may result in electric shock or re.
Do not pull or excessively bend the power cord.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 7 2019/8/22 13:42:04
8 English
Safety information
Safety information
Do not twist or tie the power cord.
Do not hook the power cord over a metal object, place a heavy object on the power cord,
insert the power cord between objects, or push the power cord into the space behind the
appliance.
• This may result in electric shock or re.
Do not pull the power cord when unplugging the power plug.
• Unplug the power plug by holding the plug.
• Failure to do so may result in electric shock or re.
This appliance should be positioned so that the power plug, the water supply taps, and the
drain pipes are accessible.
Installation cautions
CAUTION
This appliance should be positioned in such a way that the power plug is easily accessible.
• Failure to do so may result in electric shock or re due to electric leakage.
Install your appliance on a solid, leveloor that can support its weight.
• Failure to do so may result in abnormal vibrations, movement, noise, or problems with
the product.
Critical usage warnings
WARNING
If the appliance is ooded, turn off the water & power supplies immediately and contact your
nearest service centre.
• Do not touch the power plug with wet hands.
• Failure to do so may result in electric shock.
If the appliance generates a strange noise, a burning smell, or smoke, unplug the power plug
immediately and contact your nearest service centre.
• Failure to do so may result in electric shock or re.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without
touching the power plug. Do not touch the appliance or power cord.
• Do not use a ventilating fan.
• A spark may result in an explosion or re.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 8 2019/8/22 13:42:04
English 9
Safety information
Do not let children play in or on the washing machine. In addition, when disposing of the
appliance, remove the washing machine door lever.
• If trapped inside the product, children may suffocate to death.
Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the
washing machine before using it.
Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or
other inammable or explosive substances.
• This may result in electric shock,re, or an explosion.
Do not open the washing machine door by force while it is operating (high-temperature
washing/drying/spinning).
• Water owing out of the washing machine may result in burns or cause the oor to be
slippery. This may result in injury.
• Opening the door by force may result in damage to the product or injury.
Do not insert your hand under the washing machine while an operation is in progress.
• This may result in injury.
Do not touch the power plug with wet hands.
• This may result in electric shock.
Do not turn the appliance off by unplugging the power plug while an operation is in progress.
• Plugging the power plug into the wall socket again may cause a spark and result in
electric shock or re.
Do not let children climb in or onto the appliance.
• This may result in electric shock, burns or injury.
Do not insert your hand or a metal object under the washing machine while it is operating.
• This may result in injury.
Do not unplug the appliance by pulling the power cord. Always grip the plugrmly and pull
it straight out of the outlet.
• Damage to the power cord may cause a short-circuit, re and/or electric shock.
Do not attempt to repair, disassemble, or modify the appliance yourself.
• Do not use a fuse (such as copper, steel wire, etc.) other than a standard fuse.
• When the appliance needs to be repaired or reinstalled, contact your nearest service
centre.
• Failure to do so may result in electric shock,re, problems with the product, or injury.
If the water supply hose comes loose from the water tap and oods the appliance, unplug the
power plug.
• Failure to do so may result in electric shock or re.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 9 2019/8/22 13:42:04
10 English
Safety information
Safety information
Unplug the power plug when the appliance is not being used for long periods of time or
during a thunder or lightning storm.
• Failure to do so may result in electric shock or re.
If any foreign substance enters into the appliance, unplug the power plug and contact you
nearest Samsung Customer Service.
• This may result in electric shock or re.
Do not let children (or pets) play in or on your washing machine. The washing machine door
does not open easily from the inside and children may be seriously injured if trapped inside.
Usage cautions
CAUTION
When the washing machine is contaminated by a foreign substance such as detergent, dirt,
food waste, etc., unplug the power plug and clean the washing machine using a damp, soft
cloth.
• Failure to do so may result in discolouration, deformation, damage, or rust.
The front glass may be broken by a strong impact. Take care when using the washing
machine.
• If the glass is broken, it may result in injury.
After a water supply failure or when reconnecting the water supply hose, open the water tap
slowly.
Open the water tap slowly after a long period of non-use.
• The air pressure in the water supply hose or the water pipe may damage a product part
or result in a water leak.
If a draining error occurs during an operation, check if there is a draining problem.
• If the washing machine is used when it is ooded because of a draining problem, it may
result in electric shock orre.
Insert the laundry into the washing machine completely so that the laundry does not get
caught in the door.
• If laundry gets caught in the door, it may result in damage to the laundry or the washing
machine, or result in a water leak.
Turn the water supply off when the washing machine is not being used.
Ensure that the screws on the water supply hose connector are properly tightened.
• Failure to do so may result in property damage or injury.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 10 2019/8/22 13:42:04
English 11
Safety information
Ensure that the rubber seal and front door glass are not contaminated by a foreign substance
(e.g. waste, thread, hair, etc.).
• If a foreign substance is caught in the door or the door is not completely closed, it may
cause a water leak.
Open the water tap and check if the water supply hose connector is rmly tightened and that
there is no water leak before using the product.
• If the screws on the water supply hose connector are loose, it may result in a water leak.
The product you have purchased is designed for domestic use only.
Using the product for business purposes qualies as a product misuse. In this case, the
product will not be covered by the standard warranty provided by Samsung and no
responsibility can be attributed to Samsung for malfunctions or damages resulting from such
misuse.
Do not stand on the appliance or place objects (such as laundry, lighted candles, lighted
cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
• This may result in electric shock,re, problems with the product, or injury.
Do not spray volatile material such as insecticide onto the surface of the appliance.
• As well as being harmful to humans, this may result in electric shock,re or problems
with the product.
Do not place objects that generate electromagneticelds near the washing machine.
• This may result in injury due to a malfunction.
Water drained during a high-temperature wash or drying cycle is hot. Do not touch the water.
• This may result in burns or injury.
If the water temperatue is high before drain, it take time until the temperature goes down,
and it can be different depending on internal temperature.
Do not wash, spin, or dry water-proof seats, mats, or clothing (*) unless your appliance has a
special cycle for washing these items.
(*): Woollen bedding, rain covers, shing vests, ski pants, sleeping bags, diaper covers, sweat
suits, and bicycle, motor cycle and car covers, etc.
• Do not wash thick or hard mats even if the washing machine mark is on the care label.
This may result in injury or damage to the washing machine, walls,oor, or clothing due
to abnormal vibrations.
• Do not wash throw rugs or doormats with rubber backing. The rubber backing may come
off and stick to inside the drum, and this may result in malfunction such as a drainage
error.
Do not operate the washing machine when the detergent drawer is removed.
• This may result in electric shock or injury due to a water leak.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 11 2019/8/22 13:42:04
12 English
Safety information
Safety information
Do not touch the insides of the drum during or just after drying as it is hot.
• This may result in burns.
The door glass becomes hot during washing and drying. Therefore, do not touch the door
glass.
Also, do not allow children to play around the washing machine or touch the door glass.
• This may result in burns.
Do not insert your hand into the detergent drawer.
• This may result in injury as your hand may be caught by the detergent input device.
• The liquid detergent guide (applicable models only) is not used for powder detergent.
Remove the guide when using powder detergent.
Do not place any objects (such as shoes, food waste, animals) other than laundry into the
washing machine.
• This may result in damage to the washing machine, or injury and death in the case of
pets due to the abnormal vibrations.
Do not press the buttons using sharp objects such as pins, knifes, ngernails, etc.
• This may result in electric shock or injury.
Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops
or massage clinics.
• This may cause the rubber seal to become deformed and result in a water leak.
Do not leave metal objects such as safety pins, hair pins or bleach in the drum for long
periods of time.
• This may cause the drum to rust.
• If rust starts appearing on the surface of the drum, apply a (neutral) cleansing agent to
the surface and use a sponge to clean it. Never use a metal brush.
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry
contaminated by dry cleaning detergent.
• This may result in spontaneous combustion or ignition due to the heat from the oxidation
of the oil.
Do not use water from water cooling/heating devices.
• This may result in problems with the washing machine.
Do not use natural hand-washing soap for the washing machine.
• If it hardens and accumulates inside the washing machine, it may result in problems with
the product, discolouration, rust, or bad odours.
Place socks and brassieres in a washing net and wash them with the other laundry.
Do not wash large laundry items such as bedding in the washing net.
• Failure to do so may result in injury due to abnormal vibrations.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 12 2019/8/22 13:42:04
English 13
Safety information
Do not use hardened detergent.
• If it accumulates inside the washing machine, it may result in a water leak.
Make sure that the pockets of all the clothing items to be washed are empty.
• Hard, sharp objects such as coins, safety pins, nails, screws, or stones can cause extensive
damage to the appliance.
Do not wash clothing with large buckles, buttons or other heavy metal objects.
Sort the laundry by colour on the basis of its colorfastness and select the recommended
cycle, water temperature and additional functions.
• This may result in discolouration or fabric damage.
Take care that children’s ngers are not caught in the door when you close it.
• Failure to do so may result in injury.
Critical cleaning warnings
WARNING
Do not clean the appliance by spraying water directly onto it.
Do not use the a strong acidic cleaning agent.
Do not use benzene, thinner or alcohol to clean the appliance.
• This may result in discolouration, deformation, damage, electric shock or re.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
• Failure to do so may result in electric shock or re.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 13 2019/8/22 13:42:04
14 English
Installation
Installation
Follow these instructions carefully to ensure proper installation of the washing machine and
to prevent accidents when doing laundry.
Whats included
Make sure all the parts are included in the product package. If you have a problem with
the washing machine or the parts, contact a local Samsung customer centre or the retailer.
12
06
08
07
01
02
03
04
05
10
09
11
01 Release lever Detergent drawer Control panel02 03
04 05 06 Door Drum Pump lter
07 Emergency drain tube Filter cover08 09 Worktop
10 Power plug Drain hose Levelling feet11 12
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 14 2019/8/22 13:42:05
English 15
Installation
Spanner Bolt caps Hose guide
Cold water hose Hot water hose Liquid detergent guide
Cap Fixer
NOTE
• Bolt caps : The provided number (3 to 6) of bolt caps depends on the model.
• Hot water hose: Applicable models only.
• Liquid detergent guide: Applicable models only.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 15 2019/8/22 13:42:05
16 English
Installation
Installation
Installation requirements
Electrical supply and grounding
• AC 220-240 V / 50 Hz fuse or circuit
breaker is required
• Use an individual branch circuit specic
to the washing machine
To ensure proper grounding, the washing
machine comes with a power cord featuring
a three-prong grounding plug for use in a
properly installed and grounded outlet.
Check with a qualied electrician or
serviceperson if you are not sure about the
grounding.
Do not modify the provided plug. If it does
not t the outlet, call a qualied electrician
to install a proper outlet.
WARNING
• Do NOT use an extension cord.
• Use only the power cord that comes
with the washing machine.
• Do NOT connect the ground wire to
plastic plumbing, gas lines, or hot water
pipes.
• Improperly connected grounding
conductors may cause electric shock.
Water supply
A proper water pressure for this washing
machine is between 50 kPa and 800 kPa.
Water pressure less than 50 kPa may cause
the water valve not to close completely. Or,
it may take longer to ll the drum, causing
the washing machine to turn off. Water taps
must be within 120 cm from the rear of the
washing machine so that the provided inlet
hoses reach the washing machine.
To reduce the risk of leaks:
• Make sure water taps are easily
accessible.
• Turn off the taps when the washing
machine is not in use.
• Check for any leaks at the water inlet
hose ttings on a regular basis.
CAUTION
Before using the washing machine for the
rst time, check all connections at the water
valve and taps for any leaks.
Drain
Samsung recommends a standpipe in
height of 60-90 cm. The drain hose must
be connected through the hose clip to the
standpipe, and the standpipe must fully
cover the drain hose.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 16 2019/8/22 13:42:05
English 17
Installation
Flooring
For best performance, the washing
machine must be installed on a solid oor.
Woodoors may need to be reinforced
to minimize vibration and/or unbalanced
loads. Carpeting and soft tile surfaces are
not a good resistance to vibrations and may
cause the washing machine to move slightly
during the spin cycle.
CAUTION
Do NOT install the washing machine on a
platform or a poorly supported structure.
Water temperature
Do not install the washing machine in areas
where water may freeze as the washing
machine always retains some water in its
water valves, pumps, and/or hoses. Frozen
water left in the connection parts may
cause damage to belts, the pump, and other
components of the washing machine.
Alcove or closet installation
Minimum clearance for stable operation:
Sides 25 mm
Top 25 mm
Rear 50 mm
Front 550 mm
If both the washing machine and a dryer
are installed in the same location, the front
of the alcove or closet must have at least
a 550 mm unobstructed air opening. Your
washing machine alone does not require a
specic air opening.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 17 2019/8/22 13:42:05
18 English
Installation
Installation
Step-by-step installation
STEP 1 Select a location
Location requirements:
• Solid, level surface without carpeting or ooring that may obstruct ventilation
• Away from direct sunlight
• Adequate room for ventilation and wiring
• The ambient temperature is always higher than the freezing point (0 ˚C)
• Away from a heat source
STEP 2 Remove the shipping bolts
Unpack the product package and remove all shipping bolts.
NOTE
Number of shipping bolts may differ depending on the model.
WARNING
Packaging materials can be dangerous to children. Dispose all packaging material (plastic
bags, polystyrene, etc.) out of children’s reach.
A
1. Locate the shipping bolts (marked with
circle in the gure) on the rear side of
the washing machine.
CAUTION
Do not remove the screw (A) that xes the
hose clip.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 18 2019/8/22 13:42:06
English 19
Installation
2. Using the supplied spanner, loosen all
the shipping bolts by turning them
counterclockwise.
NOTE
You must keep the shipping bolts for future
use.
A
B
3. Insert the to the holes bolt caps (B)
(marked with circle in the gure).
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 19 2019/8/22 13:42:06
20 English
Installation
Installation
STEP 3 Adjust the levelling feet
1. Gently slide the washing machine into
position. Excessive force may damage
the levelling feet.
2. Level the washing machine by manually
adjusting the levelling feet.
3. When levelling is complete, tighten the
nuts using the spanner.
STEP 4 Connect the water hose
The provided hose adaptor may differ with the model. This step guides you through
connecting the connector-type adaptor. If you are provided with the screw-type adaptor, go
to 7.
A
B
Connect the water hose to the water tap.
1. Remove the from the adaptor (A) water
hose (B).
2. Use a Philips screwdriver to loosen four
screws on the adaptor.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 20 2019/8/22 13:42:07
English 21
Installation
C
3. Holde the adaptor and turn part (C) in
the arrow direction to loosen it by 5 mm
(*).
C
4. Insert the adaptor into the water tap,
and tighten the screws while lifting up
the adaptor.
5. Turn part (C) in the arrow direction to
tighten it.
E
6. While holding down , connect the part (E)
water hose to the adaptor. Then, release
part (E). The hose ts into the adaptor
with a clicking sound.
7. If you are using a screw type of water
tap, use the provided screw-type
adaptor to connect to the water tap as
shown.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 21 2019/8/22 13:42:07
22 English
Installation
Installation
8. Connect the other end of the water
hose to the inlet valve on the back of
the washing machine. Turn the hose
clockwise to tighten.
9. Open the water tap and check if there
are any leaks around the connection
areas. If there are water leaks, repeat the
steps above.
WARNING
Stop using the washing machine if there is a water leak, and contact a local Samsung service
centre. Otherwise, this may cause electric shock.
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a
longer, high-pressure hose.
NOTE
• After connecting the water hose to the adaptor, check if it is connected properly by
pulling the water hose downwards.
• Use a popular type of water taps. If the tap is square-shaped or too big, remove the
spacer ring before inserting the tap into the adaptor.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 22 2019/8/22 13:42:07
English 23
Installation
For models with an additional hot water inlet:
1. Connect the red end of the hot water
hose to the hot water inlet on the back
of the machine.
2. Connect the other end of the hot water
hose to the hot water tap.
Aqua hose (applicable models only)
A
The aqua hose alerts users of a risk of water
leaks. It senses the water ow and turns red
on the centre in case of a leak.indicator (A)
NOTE
The end of the aqua stop hose must betted to the water tap and not the machine.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 23 2019/8/22 13:42:07
24 English
Installation
Installation
STEP 5 Position the drain hose
The drain hose can be positioned in three ways:
A
Over the edge of a wash basin
The drain hose must be placed at a height
of between 60 cm and 90 cm (*) from the
oor. To keep the spout of the drain hose
bent, use the supplied plastic hose guide (A).
Secure the guide to the wall using a hook to
ensure stable drainage.
ln a drain pipe
The drain pipe should be between 60 cm
and 90 cm high (*). It is advisable to use
a 65 cm high vertical pipe. Make sure the
drain hose is connected to the stand pipe at
a slant.
Drain standpipe requirements:
• Minimum diameter of 5 cm
• Minimum carry-away capacity of
60 litres per minute
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 24 2019/8/22 13:42:08
English 25
Installation
In a sink drain pipe branch
The drain pipe branch mush be above the
sink siphone so that the end of the hose is
at least 24 in. (60 cm) above the ground.
(*) : 24 in. (60 cm)
STEP 6 Power on
Plug the power cord into a wall socket featuring an AC 220-240 V / 50 Hz approved electrical
outlet protected by a fuse or circuit breaker. Then, press to turn on the washing Power
machine.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 25 2019/8/22 13:42:08
26 English
Before you start
Before you start
Initial settings
Run Calibration (recommended)
Calibration ensures accurate weight detection by the washing machine. Make sure the drum
is empty before running Calibration.
1. Power off, and then power on the washing machine.
2. Hold down Temp. and simultaneously for 3 seconds to enter Calibration Delay End +
mode. The ” message appears.CB
3. Press Start/Pause (Hold to Start) to run the Calibration cycle.
4. The drum will rotate clockwise and counter-clockwise for about 3 minutes.
5. When the cycle is complete, “ ” appears on the display and the washing machine will turn 0
off automatically. The washing machine is now ready for use.
Laundry guidelines
STEP 1 Sort
Sort the laundry according to these criteria:
• Care Label: Sort the laundry into cottons, mixed bres, synthetics, silks, wools, and rayon.
• Colour: Separate whites from colours.
• Size: Mixing different-sized items together in the drum improves the washing
performance.
• Sensitivity: Wash delicate items separately for pure, new woollen items, curtains, and silk
items. Check the labels on the items.
NOTE
Make sure to check the care label on the clothing, and sort them accordingly before starting
the wash.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 26 2019/8/22 13:42:08
English 27
Before you start
STEP 2 Empty pockets
Empty all the pockets of your laundry items
• Metal objects such as coins, pins, and buckles on clothing may damage other laundry
items as well as the drum.
Turn clothing with buttons and embroideries inside out
• If pants or jacket zippers are open while washing, the drum may be damaged. Zippers
should be closed andxed with a string.
• Clothing with long strings may become entangled with other clothes. Make sure to tie the
strings before starting the wash.
STEP 3 Use a laundry net
• Brassieres (water washable) must be placed in a laundry net. Metal parts of the brassieres
may break through and tear other laundry items.
• Small, light clothing such as socks, gloves, stockings, and handkerchiefs may become
caught around the door. Place them inside a ne laundry net.
• Do not wash the laundry net by itself without other laundry. This may cause abnormal
vibrations that could move the washing machine and result in injury.
STEP 4 Prewash (if necessary)
Select the Prewash option for the selected course if the laundry is heavily soiled. Do not use
the Prewash option when detergent is manually added into the drum or if applying liquid
detergent.
STEP 5 Determine the load capacity
Do not overload the washing machine. Overloading may cause the washing machine to not
wash properly. For the load capacity for the type of clothing, see page 36.
NOTE
When washing bedding or bedding covers, the wash time may be lengthened or the spin
efciency may be reduced. For bedding or bedding covers, the recommended maximum spin
cycle speed is 800 rpm, and the load capacity is 2.0 kg or less.
CAUTION
• Unbalanced laundry may reduce the spinning performance.
• Make sure the laundry is fully inserted in the drum and not caught in the door.
• Do not slam the door. Close the door gently. Otherwise, the door may not be closed
properly.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 27 2019/8/22 13:42:08
28 English
Before you start
Before you start
STEP 6 Apply a proper detergent type
The type of detergent depends on the type of fabric (cotton, synthetic, delicate items, wool),
colour, wash temperature, and degree of soiling. Make sure to use the laundry detergent that
is designed for automatic washing machines.
NOTE
• Follow the detergent manufacturer’s recommendations based on the weight of the
laundry, the degree of soiling, and the hardness of the water in your local area. If you are
not sure about the water hardness, contact a local water authority.
• Do not use detergent that tends to be hardened or solidied. This detergent may remain
after the rinse cycle, blocking the drain outlet.
• If too many bubbles occur during a cycle, a message of ‘Sud’ will be displayed.
CAUTION
When washing wool using the cycle, use a detergent dedicated to wool items. If WOOL
used with the cycle, powder detergent may remain on the laundry and discolour the WOOL
laundry.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 28 2019/8/22 13:42:08
English 29
Before you start
Laundry capsules
To get the best results from using laundry capsules, please follow these instructions.
1. Put the capsule in the bottom of the
empty drum towards the rear.
2. Put the laundry in the drum on top of
the capsule.
CAUTION
For cycles using cold water or cycles that complete in less than one hour, the capsule may not
dissolve completely.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 29 2019/8/22 13:42:09
30 English
Before you start
Before you start
Detergent drawer guidelines
The washing machine provides a three-compartment dispenser: the left compartment for the
main wash, the centre for fabric softeners, and the right for the preliminary wash.
01 Prewash compartment: Apply
prewash detergent or starch.
02 Main-wash compartment: Apply
main-wash detergent, water softener,
soaking detergent, bleach, and/or stain
removers.
03 Softener compartment: Apply
additives such as fabric softener. Do not
exceed the max line (A).
CAUTION
• Do not open the detergent drawer while the washing machine is operating.
• Do not use the following types of detergent:
- Tablet or capsule types
- Ball or net types
• To prevent the compartment clogging, concentrated or highly-enriched agents (fabric
softener or detergent) must be diluted with water before being applied.
• Before moving the washing machine, make sure to empty the detergent drawer that
might contain detergent and/or fabric softener. The content in the drawer may spill out
on theoor.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 30 2019/8/22 13:42:09
English 31
Before you start
To apply washing agents to the detergent drawer
1. Slide open the detergent drawer.
2. Apply laundry detergent to the
main-wash compartment as instructed
or recommended by the manufacturer.
To use liquid detergent, see page 32.
3. Apply fabric softener to the softener
compartment. Do not exceed the max
line.
4. If you want to prewash, apply
prewash detergent to the prewash
compartment as instructed or
recommended by the manufacturer.
5. Close the detergent drawer.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 31 2019/8/22 13:42:09
32 English
Before you start
Before you start
CAUTION
• Do not apply powder detergent to the
liquid detergent guide.
• Concentrated fabric softener must be
diluted with water before applied.
• Do not apply main-wash detergent to
the softener compartment.
To use liquid detergent (applicable models only)
A
First insert the provided liquid detergent
container in the main-wash
compartment. Then, apply liquid detergent
to the container below the marked max line
(A).
CAUTION
• Do not exceed the max line that is
marked inside the container.
• Turn up the liquid container if using
powder detergent.
When using liquid detergent When using powder detergent
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 32 2019/8/22 13:42:10
English 33
Operations
Operations
Control panel
10
02
0908
11
12
03 04 05 06
01
07
01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
For buttons and icons, refer to the corresponding page.
03 Temp. Press to change the water temperature for the current cycle.
04 Rinse Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5, depending on the cycle.
05 Spin
Press to change the spinning speed for the current cycle. The
revolutions per minute (RPM) differs with the model.
• Rinse Hold(No indicator): The nal rinse process is suspended so
that the laundry remains in the water. To unload the laundry, run
a drain or spin process.
- To use the Rinse Hold option, press Spin repeatedly until all
rpm numeric indicators turn off. Not available for the DRAIN/
SPIN cycle.
• Spin Only: To run the Spin Only cycle, press for 3 seconds. Spin
When the cycle time and spinning speed appear, press Spin
repeatedly until a desired spinning speed is selected. Then,
press and hold Start/Pause (Hold to Start) to start the cycle. The
spinning time depends on the selected cycle.
06 Options Press to select the options. Availability of the options depends on
the cycle.
07 Delay End
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine’s internal logic. For example, this setting is useful
for programming your machine to nish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 33 2019/8/22 13:42:10
34 English
Operations
Operations
08 Bubble Soak
Press to activate/deactivate the Bubble Soak function. This function
helps remove a wide variety of stubborn stains.
• Bubble Soak helps remove a variety of stubborn stains.
• With Bubble Soak selected, laundry is thoroughly soaked in
water bubbles for effective washing.
• Bubble Soak is available with and adds up to 30 minutes to these
cycles: COTTON, SYNTHETICS, BEDDING, HYGIENE STEAM and
SUPER SPEED.
09 Easy Iron The spinning speed decreases to reduce wrinkles of the laundry.
• Set the spinning speed up to 800 rpm.
10 Smart Control
Press to activate/deactivate the Smart Control function. When the
Smart Control function is activated, you can control your washing
machine using your mobile device. For more information, see the
SmartThings section on page 42.
11 Power Press to turn on/off the washing machine.
12 Start/Pause
(Hold to Start)
Press and hold to start an operation, or press to stop an operation
temporarily.
For more information on the options, see the Special features section.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 34 2019/8/22 13:42:10
English 35
Operations
Simple steps to start
4
1
6
2
3
5
1. Press Power to turn on the washing machine.
2. Select a cycle in the cycle panel.
3. Change the cycle settings (Temp., Rinse, and Spin) as necessary.
4. To add an option, press . Use the button again to choose a preferred item.Options
5. The machine supports the options of Bubble Soak, Easy Iron Smart Control, and for easy
access. To use an option item, press the corresponding button.
6. Press and hold Start/Pause (Hold to Start).
To change the cycle during operation
1. Press Start/Pause (Hold to Start) to stop operation.
2. Select a different cycle.
3. Press Start/Pause (Hold to Start) again to start the new cycle.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 35 2019/8/22 13:42:10
36 English
Operations
Operations
Cycle overview
Standard cycles
Cycle Description & Max load (kg)
COTTON
• For cottons, bed linens, table linens, underwear, towels,
or shirts.
The washing time and the rinse count are automatically
adjusted according to the load.
Max
e-COTTON
• Optimal performance with lower energy for cotton
fabrics, bed linens, table linens, underwear, towels, or
shirts.
For energy saving, the actual washing temperature may
be lower than specied.
Max
SYNTHETICS For blouses or shirts that are made of polyester (diolen,
trevira), polyamide (perlon, nylon), or the like. 4
DELICATES
• For sensitive fabrics as rayon, viscose and synthetics
blended ber.
• For best performance, use liquid detergent.
2
RINSE+SPIN • Featuring an additional rinse process after applying
fabric softener to the laundry. Max
DRAIN/SPIN • Select this cycle to drain the water and spin the drum. Max
ECO DRUM CLEAN+
• Cleans the drum by removing dirt and bacteria from it.
• Cleans the rubber door gasket by removing dirt from
the gasket.
• Perform once every 40 washes with no detergent or
bleach applied. It noties automatically after every 40
washes.
• Make sure the drum is empty.
• Do not use any cleaning agents for cleaning the drum.
-
15’ QUICK WASH
For lightly soiled items in less than 2.0 kg that you want to
wash quickly.
• Use less than 20 g of detergent. Using more than 20 g
of detergent may leave detergent residue.
• For liquid detergent, use a max of 20 ml of liquid
detergent.
2
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 36 2019/8/22 13:42:10
English 37
Operations
Cycle Description & Max load (kg)
SUPER SPEED
• Fast completion within 39 minutes for everyday items
such as underwear and shirts.
• The cycle time will differ depending on the water
supply conditions, and the load and type of laundry.
5
SUPER ECO WASH • Low temperature ecobubble cycle helps reduce power
consumption. 4
WOOL
• Specic for machine-washable wool for loads less than
2.0 kg.
• The wool cycle features ne pulsating and soaking
to protect the wool bres from shrinkage/distortion.
• A neutral detergent is recommended.
2
OUTDOOR CARE
• For outdoor clothes, skiwear, and sportswear that are
made of functional materials such as spandex, stretch,
and micro-bre
2
Steam cycles
Steam may not be visible or present during the cycle. This is normal.
BEDDING
• For bed spreads, bed sheets, bedding covers, etc.
• For best results, wash only 1 type of bedding and make
sure the load weighs less than 2.0 kg.
2
HYGIENE STEAM
• Cotton and linen fabric which have been in direct
contact with the skin, e.g. underwear. For optimum
hygiene results select a temperature of 60 °C or above.
• Steam cycles feature allergy care and bacteria
elimination (sterilize).
4
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 37 2019/8/22 13:42:10
38 English
Operations
Operations
Options
Option Description
Intensive For badly soiled laundry. The operation time for each cycle is
longer than normal.
Pre Wash • This will add a preliminary washing cycle before the main
wash cycle.
Delay End
You can set the washing machine tonish your wash automatically at a later time, choosing a
delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time
the wash will nish.
1. Select a cycle with necessary settings.
2. Press Delay End (or the +/- button) repeatedly until a desired end time is set.
3. Press and hold Start/Pause (Hold to Start). The Delay End indicator blinks and the washing
machine tumbles the drum to sense the weight of the load if load sensing is preset for the
selected cycle. When complete, it displays your set time with the timer running.
4. To cancel the Delay End, restart the washing machine by pressing Power.
Real-life case
You want to nish a two-hour cycle 3 hours later from now. For this, you add the Delay End
option to the current cycle with the 3-hour setting, and Press and hold Start/Pause (Hold to
Start) at 2:00 p.m. Then, what happens? The washing machine starts operating at 3:00 p.m.,
and ends at 5:00 p.m. Provided below is the time line for this example.
2:00 pm
Set the Delay End to 3 hours
3:00 pm
Start
5:00 pm
End
Load sensor
The load sensor icon lights up when you select a cycle that supports load sensing. Some
cycles may not support loading sensing. Once you start the cycle, the icon blinks or stays
solid during the load sensing process, and turns off when the process is complete.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 38 2019/8/22 13:42:11
English 39
Operations
Special features
AddWash
When the AddWash indicator is on, you can stop operation of the machine and put
additional laundry or softener into the drum. The Add Door opens by more than 13 for
easy access.
1. Press Start/Pause (Hold to Start) to stop
operation.
2. Press the upper area of the Add Door
until you hear a clicking sound to unlock.
Pull the handle of the Add Door to open.
3. Open the Add Door and put additional
laundry or softener into the drum.
4. Push the Add Door until you hear a
clicking sound to close.
5. Press and hold Start/Pause (Hold to
Start) to resume operation.
CAUTION
Do not put excessive force on the Add Door.
It may break.
NOTE
The water inside the drum does not leak if the Add Door is closed properly. Water drops may
form around the window, but they do not leak from inside the drum.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 39 2019/8/22 13:42:12
40 English
Operations
Operations
CAUTION
• Do not open the Add Door if suds have formed inside the drum that rise above the level
of the Add Door.
• Do not attempt to open the Add Door while the machine is operating without rst
pressing Start/Pause (Hold to Start). Please note that the Add Door can be opened
unintentionally (without pressing Start/Pause (Hold to Start)) when the wash is complete.
• Do not add an excessive load through the Add Door. Performance may be degraded.
• Do not use the lower area of the Add Door as a handle. Yourngers may be caught.
• Make sure that no laundry is caught in the Add Door.
• Keep your pets out of the washing machine, especially the Add Door.
• When using hot water for the wash, the Add Door may appear to leak water after
opening and closing the Add Door. This is normal, simply because steam emerging from
the open Add Door has cooled and formed water drops on the surface.
• When the Add Door closes, the door seals up and no water can leak. However, you
may encounter what appears to be water leak around the door - some residual water
remaining around the Add Door may form water drops. This is normal.
• Neither the main door or the Add Door can opened when the water temperature is over
50 ˚C. If the water level inside the drum is over a certain point, the main door cannot be
opened.
• If an information code of appears on the display, see the DDC” Information codes section
for further actions.
• Keep the Add door and its surroundings clean at all times. Debris or detergent on or
around the seals of the Add door may cause a leak.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 40 2019/8/22 13:42:12
English 41
Operations
Settings
Child Lock
To prevent children or infants from
accidentally starting or setting the washing
machine, Child Lock locks all buttons except
for the button.Power
To activate Child Lock
• Press and hold - and (of the + Delay End
option) simultaneously for 3 seconds.
Then, press and hold Start/Pause (Hold
to Start) to activate. The door locks and
the Child Lock indicator turns on.
To deactivate Child Lock temporarily
You can deactivate Child Lock temporarily
for 1 minute. The door is unlocked for 1
minute and the Child Lock indicator blinks.
• Press and hold - and (of the + Delay End
option) simultaneously for 3 seconds.
NOTE
• If you open the door 1 minute or more
after deactivating Child Lock, an alarm
sounds for up to 2 minutes.
• If you close the door within 2 minutes,
the door locks and Child Lock is
reactivated. If you do not close the door
or the door is not properly closed, the
alarm keeps sounding for 2 minutes.
• To add laundry after activating Child
Lock, rst deactivate Child Lock or
restart the washing machine.
To cancel the Child Lock
• Press and hold - and (of the + Delay End
option) simultaneously for 3 seconds to
deactivate, and then press and hold the
buttons again for 3 seconds to cancel
Child Lock. The door unlocks and the
Child Lock indicator turns off.
Sound On/Off
You can turn on or off the sound from the
washing machine. When this function is set
to Off, the AddWash alarm, the melody of
cycle completion, and the power-off beep
will not sound. However, the other sounds
stay active.
• To mute the sound, press and hold
Options for 3 seconds.
• To unmute the sound, press and hold
again for 3 seconds.
• Your setting will be kept even after
restarting the machine.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 41 2019/8/22 13:42:12
42 English
Operations
Operations
SmartThings
Wi-Fi connection
On your smartphone, go to the Settings and turn on the wireless connection and select an AP
(Access Point).
NOTE
• This device is designed for household use only (Class B), and can be used in all residential
areas.
• This device may cause wireless interference, and neither the manufacturer or the installer
of this device can provide a safety measure of any kind.
• Recommended encryption methods are WPA/TKIP and WPA2/AES. Newly developed Wi-
Fi protocols or unapproved Wi-Fi protocols are not supported.
• The reception sensitivity of a wireless network may be affected by surrounding wireless
environments.
• If your Internet provider has registered the MAC address of your PC or the modem
module for permanent use, your Samsung washing machine fails to connect to the
Internet. If this is the case, contact your Internet provider.
• The Internet rewall may interrupt your Internet connection. If this happens, contact your
Internet provider.
• If Internet failure continues after following the measurement of your Internet provider,
contact a local Samsung retailer or service centre.
• For installing wired and wireless routers, refer to the user manual of the router you use.
• Samsung washing machine supports the Wi-Fi 2.4 GHz protocols.
• Samsung washing machine supports the IEEE802.11 b/g/n (2.4 GHz), Soft-AP protocols.
• (IEEE802.11n is recommended)
• An unapproved wired/wireless router may fail to connect to Samsung washing machine.
Download
On an app market (Google Play Store, Apple App Store, Samsung Galaxy Apps),nd the
SmartThings app with a search term of SmartThings”. Download and install the app on your
device.
NOTE
• The SmartThings app is available on third-party devices with Android OS 6.0
(Marshmallow) or higher, Samsung devices with Android OS 5.0 (Lollipop) or higher, and
iOS devices with iOS 10.0 or higher. For iPhones, it must be iPhone 6 or higher. The app is
optimised for Samsung smartphones (Galaxy S and Note series).
• Some functions of the app may operate differently on third-party devices.
• The app is subject to change without notice for improved performance.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 42 2019/8/22 13:42:12
English 43
Operations
Log in
You mustrst log into SmartThings with your Samsung account. To create a new Samsung
account, follow the instructions on the app. You dont need a separate app to create your
account.
NOTE
If you have a Samsung account, use the account to log in. A registered Samsung smartphone
user automatically logs in.
To register your device to SmartThings
1. Make sure your smartphone is connected to a wireless network. If not, go to the Settings
and turn on the wireless connection and select an AP (Access Point).
2. Select to run SmartThings on your smartphone.
3. When a message of A new device is found., select Add.
4. If no message appears, select + and select your washing machine in a list of devices
available. If your washing machine is not listed, select Device Type Specic Device >
Model, and then add your washing machine manually.
5. Register your washing machine to the SmartThings app as follows.
a.
Log into SmartThings with your Samsung account.
b.
Turn a Wi-Fi connection on.
c.
Add your washing machine to SmartThings. Make sure your washing machine is
connected to SmartThings.
d.
When registration is complete, your washing machine appears on your smartphone.
Washing Machine app
Integrated control: You can monitor and control your washing machine both at home and on
the go.
• Select the Washing Machine icon on SmartThings. The Washing Machine page appears.
• Check the operation status or notications related to your washing machine, and change
options or settings if necessary.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 43 2019/8/22 13:42:12
44 English
Operations
Operations
SmartThings
Category Checkpoint Description
Monitoring
Washing status You can check the current cycle and its
options, and the remaining cycle time.
Smart Control The Smart Control status is shown for the
washing machine.
Self Check Use this to check if the washing machine
operates normally.
Energy monitoring Use this to monitor the energy
consumption status.
Control
Start/Pause/Cancel
Select a cycle and necessary options, and
then select Start/Pause/ Cancel to start
an operation, to stop temporarily, or to
cancel the current operation.
My Favorite Add frequently used cycles and options to
My Favorite for later use.
Notication
Cycle completed Noties you the current cycle is complete.
AddWash alarm (applicable
models only) Noties you of the addition of a new load.
Remaining laundry
(applicable models only)
Noties you of any laundry left after a
cycle is complete.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 44 2019/8/22 13:42:12
English 45
Operations
Category Checkpoint Description
Q-Rator
Laundry Recipe *
You can select the fabric type, color, and
the soil level to get recommended options
and wash cycles that you can start right
away.
Laundry Planner *
You can set the desired time for a wash
cycle to nish.
After you set the desired time, you will
get a recommended cycle that will end
within the time you set, and you can start
or reserve the recommended cycle.
HomeCare Wizard *
Provides a regular report with an analysis
of the machine operation state in a user-
set frequency (every week/month).
You can use this regular report to
check your usage pattern, maintenance
requirements, and energy consumption **
for the set period of time.
* Requires SmartThings, available on Android and iOS.
Registration required.
** Indicative results only.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 45 2019/8/22 13:42:12
46 English
Operations
Operations
Open Source Announcement
The software included in this product contains open source software. You may obtain the
complete corresponding source code for a period of three years after the last shipment of
this product by sending an email to mailto:oss.request@samsung.com.
It is also possible to obtain the complete corresponding source code in a physical medium
such as a CD-ROM; a minimal charge will be required.
The following URL http://opensource.samsung.com/opensource/SMART_AT_051/seq/0 leads to
the download page of the source code made available and open source license information as
related to this product. This offer is valid to anyone in receipt of this information.
NOTE
Hereby, Samsung Electronics, declares that the radio equipment type appliance is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address: The ofcial Declaration of conformity may be
found at http://www.samsung.com, go to Support > Search Product Support and enter the
model name.
Wi-Fi max transmitter power : 20 dBm at 2.412GHz – 2.472GHz
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 46 2019/8/22 13:42:13
English 47
Maintenance
Maintenance
Keep the washing machine clean to prevent deteriorated performance and to preserve its life
cycle.
Eco drum clean +
Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats
the water between 60 °C and 70 °C, and it also removes accumulated dirt from the rubber
door gasket.
1. Press Power to turn on the washing machine.
2. Turn the to select Cycle Selector ECO DRUM CLEAN +.
3. Press and hold Start/Pause (Hold to Start).
CAUTIO
Do not use any cleaning agents for cleaning the drum. Chemical residue in the drum may
cause damage to the laundry or the drum of the washing machine.
ECO DRUM CLEAN+ reminder
• The ECO DRUM CLEAN reminder appears on the main screen once every 40 washes. It is
advisable to perform the ECO DRUM CLEAN + regularly.
• When you rst see this reminder, you can ignore the reminder for 6 consecutiv washes.
From the 7 th wash, the reminder no longer appears. However, it appears again on the
second 40 th wash.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 47 2019/8/22 13:42:13
48 English
Maintenance
Maintenance
Smart Check
To enable this function, you must rst download the Samsung Smart Washer app at the Play
Store or the App Store, and install it on a mobile device featuring a camera function.
The Smart Check function has been optimised for Galaxy & iPhone series (applicable models
only).
1. When the washing machine detects an issue to check, an information code appears on the
display. To enter Smart Check mode, press and hold and simultaneously for 3 Rinse Spin
seconds.
2. The washing machine starts the self-diagnosis procedure and displays an information
code if a problem is detected.
3. Run the Samsung Smart Washer app on your mobile device, and tap Smart Check.
4. Put the mobile device close to the washing machines display so that the smartphone
camera and the washing machine face each other. Then, the information code will be
recognised automatically by the app.
5. When the information code is recognised correctly, the app provides detailed information
about the problem with applicable solutions.
NOTE
• The function name, Smart Check, may differ depending on the language.
• If the washing machine reects light on the display, the app may fail to recognise the
information code.
• If the app fails to recognise the Smart Check code consecutively, enter the information
code manually onto the app screen.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 48 2019/8/22 13:42:13
English 49
Maintenance
Emergency drain
In case of a power failure, drain the water inside the drum before taking out the laundry.
A
1. Power off and unplug the washing
machine from the electrical outlet.
2. Gently press the top area of the lte
cover (A) to open.
B
3. Put an empty, spacious container around
the cover, and stretch the emergency
drain tube to the container while holding
the tube cap (B).
C
4. Open the tube cap and let water in the
emergency drain tube (C) ow into the
container.
5. When done, close the tube cap, and
reinsert the tube. Then, close the lter
cover.
NOTE
Use a spacious container because the water
in the drum may be more than expected.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 49 2019/8/22 13:42:13
50 English
Maintenance
Maintenance
Cleaning
Surface of the washing machine
Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the
washing machine.
Add Door
A
1. Open the Add Door.
2. Use a wet cloth to clean the Add Door.
- Do not use cleaning agents.
Discolouration may occur.
- Use caution when cleaning the rubber
packing and the locking mechanism
(A).
- Dust off the window area regularly.
3. Wipe up and close the Add Door until
you hear a clicking sound.
CAUTION
• Do not apply force on the Add Door. It may break.
• Do not leave the Add Door open while the machine is operating.
• Do not put heavy objects on the Add Door at any time.
• To prevent physical injury, do not touch the Add Door while the drum is rotating.
• Do not open the Add Door while the machine is operating. This may cause physical injury.
• Do not manipulate the feature panel while the Add Door is open. This may cause physical
injury or system failure.
• Do not input objects other than laundry.
• Do not input bulky items to the drum through the Add Door.
• Do not pull out the rubber packing of the Add Door when cleaning. This may cause
damage.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 50 2019/8/22 13:42:14
English 51
Maintenance
Mesh lter
Clean the mesh lter of the water hose once or twice a year.
1. Turn off the washing machine, and
unplug the power cord.
2. Close the water tap.
3. Loosen and disconnect the water hose
from the back of the washing machine.
Cover the hose with a cloth to prevent
water from gushing out.
4. Use pliers to pull out the mesh lter
from the inlet valve.
5. Submerge the mesh lter deeply in
water so that the threaded connector is
also submerged.
6. Dry the mesh lter completely in the
shade.
7. Reinsert the mesh lter into the inlet
valve, and reconnect the water hose to
the inlet valve.
8. Open the water tap.
NOTE
If the mesh lter is clogged, an information code of “ appears on the screen.4C
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 51 2019/8/22 13:42:14
52 English
Maintenance
Maintenance
Pump lter
It is advisable to clean the pump lter 5 or 6 times a year to prevent its clogging. A clogged
pump lter may reduce the bubble effect.
1. Turn off the washing machine, and
unplug the power cord.
2. Drain the remaining water inside the
drum drum. See the “Emergency drain
section.
3. Gently press the top area of the lte
cover to open.
4. Turn the pump lter knob to the left, and
drain off the remaining water.
5. Clean the pump lter using soft brushes.
Make sure the drain pump propeller
inside the lter is unclogged.
6. Reinsert the pump lter, and turn the
lter knob to the right.
NOTE
• Some pumplters feature a safety knob
that is designed to prevent accidents
by children. To open the safety knob
of the pump lter, push in and turn it
anticlockwise. The spring mechanism of
the safety knob helps open the lter.
• To close the safety knob of the pump
lter, turn it clockwise. The spring makes
a rattling sound, which is normal.
NOTE
If the pump lter is clogged, an information code of appears on the screen.5C
CAUTION
• Make sure thelter knob is closed properly after cleaning the lter. Otherwise, this may
cause a leak.
• Make sure thelter is inserted properly after cleaning it. Otherwise, this may cause an
operational failure or a leak.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 52 2019/8/22 13:42:14
English 53
Maintenance
Detergent Drawer
1. While holding down the release lever
inside the drawer, slide open the drawer.
2. Clean the drawer components in owing
water using a soft brush.
3. Clean the drawer recess using a soft
brush.
4. Reinsert the release lever and the Liquid
detergent guide to the drawer.
5. Slide the drawer inward to close it.
NOTE
To remove remaining detergent, perform the cycle with the drum being empty.RINSE+SPIN
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 53 2019/8/22 13:42:14
54 English
Maintenance
Maintenance
Recovery from freezing
The washing machine may freeze when it drops below 0 °C.
1. Turn off the washing machine, and unplug the power cord.
2. Pour warm water over the water tap to loosen the water hose.
3. Disconnect the water hose, and soak it in warm water.
4. Pour warm water into the drum and leave it for about 10 minutes.
5. Reconnect the water hose to the water tap.
NOTE
If the washing machine still doesnt operate normally, repeat the above steps until it operates
normally.
Care against an extended time of disuse
Avoid leaving the washing machine unused for an extended time. If this is the case, drain the
washing machine and unplug the power cord.
1. Turn the to select a Cycle Selector RINSE+SPIN.
2. Empty the drum, and press and hold Start/Pause (Hold to Start).
3. When the cycle is complete, close the water tap and disconnect the water hose.
4. Turn off the washing machine, and unplug the power cord.
5. Open the door to let air circulate through the drum.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 54 2019/8/22 13:42:15
English 55
Troubleshooting
Troubleshooting
Checkpoints
If you encounter a problem with the washing machine, rst check the table below and try the
suggestions.
Problem Action
Does not start.
• Make sure the washing machine is plugged in.
• Make sure the door is properly closed.
• Make sure the water taps are open.
• Make sure to press or tap Start/Pause (Hold to Start) to start the
washing machine.
• Make sure Child Lock
is not activated.
• Before the washing machine starts to ll, it will make a series of
clicking noises to check the door lock and does a quick drain.
• Check the fuse or reset the circuit breaker.
Water supply is
insufcient, or no
water is supplied.
• Fully open the water tap.
• Make sure the door is properly closed.
• Make sure the water supply hose is not frozen.
• Make sure the water supply hose is not kinked or clogged.
• Make sure there is sufcient water pressure.
After a cycle,
detergent remains in
the detergent drawer.
• Make sure the washing machine is running with sufcient water
pressure.
• Make sure the detergent is added to the centre of the detergent
drawer.
• Make sure the rinse cap is inserted properly.
• If using granular detergent, make sure the detergent selector is
in the upper position.
• Remove the rinse cap and clean the detergent drawer.
Excessive vibrations
or makes noise.
• Make sure the washing machine is installed on a level, solid
oor that is not slippery.
If the oor is not level, use the levelling feet to adjust the
height of the washing machine.
• Make sure the shipping bolts are removed.
• Make sure the washing machine is not contacting any other
object.
• Make sure the laundry load is balanced.
• The motor can cause noise during normal operation.
• Overalls or metal-decorated clothes can cause noise while being
washed. This is normal.
• Metal objects such as coins can cause noise. After washing,
remove these objects from the drum or lter case.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 55 2019/8/22 13:42:15
56 English
Troubleshooting
Troubleshooting
Problem Action
Does not drain and/
or spin.
• Make sure the drain hose is straightened all the way to the
drain system. If you encounter a drain restriction, call for
service.
• Make sure the debris lter is not clogged.
• Close the door and press or tap Start/Pause (Hold to Start). For
your safety, the washing machine will not tumble or spin unless
the door is closed.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is connected to a drain system that is
not clogged.
• If the washing machine is not supplied with sufcient power,
the washing machine temporarily will not drain or spin.
As soon as the washing machine regains sufcient power, it will
operate normally.
The door does not
open.
• Press or tap Start/Pause (Hold to Start) to stop the washing
machine.
• It may take a few moments for the door lock mechanism to
disengage.
• The door will not open until 3 minutes after the washing
machine has stopped or the power turned off.
• Make sure all the water in the drum is drained.
• The door may not open if water remains in the drum. Drain the
drum and open the door manually.
• Make sure the door lock light is off. The door lock light turns off
after the washing machine has drained.
Excessive suds.
• Make sure you use the recommended types of detergent as
appropriate.
• Use high efciency (HE) detergent to prevent oversudsing.
• Reduce the detergent amount for soft water, small loads, or
lightly soiled loads.
• Non-HE detergent is not recommended.
Cannot apply
additional detergent.
• Make sure the remaining amount of detergent and fabric
softener is not over the limit.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 56 2019/8/22 13:42:15
English 57
Troubleshooting
Problem Action
Stops.
• Plug the power cord into a live electrical outlet.
• Check the fuse or reset the circuit breaker.
• Close the door and press the Start/Pause (Hold to Start) button
to start the washing machine.
For your safety, the washing machine will not tumble or spin
unless the door is closed.
• Before the washing machine starts to ll, it will make a series of
clicking noises to check the door lock and does a quick drain.
• There may be a pause or soak period in the cycle. Wait briey
and the washing machine may start.
• Make sure the mesh lter of the water supply hose at the water
taps are not clogged. Periodically clean the meshlter.
• If the washing machine is not supplied with sufcient power,
the washing machine temporarily will not drain or spin. As soon
as the washing machine regains sufcient power, it will operate
normally.
Fills with the wrong
water temperature.
• Fully open both taps.
• Make sure the temperature selection is correct.
• Make sure the hoses are connected to the correct taps. Flush
water lines.
• Make sure the water heater is set to supply a minimum 120 °F
(49 °C) hot water at the tap. Also, check the water heater
capacity and recovery rate.
• Disconnect the hoses and clean the mesh lter. The mesh lter
may be clogged.
• While the washing machine lls, the water temperature may
change as the automatic temperature control feature checks
incoming water temperature. This is normal.
• While the washing machine lls, you may notice just hot and/or
just cold water going through the dispenser when cold or warm
temperatures are selected.
This is a normal function of the automatic temperature
control feature as the washing machine determines the water
temperature.
Load is wet at the
end of a cycle.
• Use the High or Extra High spin speed.
• Use high efciency (HE) detergent to reduce oversudsing.
• Load is too small. Small loads (one or two items) may become
unbalanced and not spin completely.
• Make sure the drain hose is not kinked or clogged.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 57 2019/8/22 13:42:15
58 English
Troubleshooting
Troubleshooting
Problem Action
Leaks water.
• Make sure the door is properly closed.
• Make sure all hose connections are tight.
• Make sure the end of the drain hose is correctly inserted and
secured to the drain system.
• Avoid overloading.
• Use high efciency (HE) detergent to prevent oversudsing.
Has odours.
• Excessive suds collect in recesses and can cause foul odours.
• Run cleansing cycles to sanitize periodically.
• Clean the door seal (diaphragm).
• Dry the washing machine interior after a cycle has nished.
No bubbles are seen
(Bubbleshot models
only).
• Overloading may screen bubbles.
• Severely contaminated laundry may not generate bubbles.
Can I open the Add
Door at any time?
• The Add Door can be opened only when the indicator
appears. However, it does not open in the following cases:
- When the boiling or drying process is running and the
internal temperature becomes high.
- If you set the Child Lock for safety reasons.
- When the drum wash or drum drying cycle is running that
does not involve additional laundry.
If a problem persists, contact a local Samsung service centre.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 58 2019/8/22 13:42:15
English 59
Troubleshooting
Information codes
If the washing machine fails to operate, you may see an information code on the screen.
Check the table below and try the suggestions.
Code Action
4C
Water is not supplied.
• Make sure the water taps are open.
• Make sure the water hoses are not clogged.
• Make sure the water taps are not frozen.
• Make sure the washing machine is operating with sufcient
water pressure.
• Make sure that the cold water tap and the hot water tap are
properly connected.
• Clean the meshlter as it may be clogged.
NOTE
When the washer displays the “4C” code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
4C2
• Make sure the cold water supply hose isrmly connected to
the cold water tap.
If it is connected to the hot water tap, the laundry may be
deformed with some cycles.
5C
Water is not draining.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is positioned correctly, depending on
the connection type.
• Clean the debris lter as it may be clogged.
• Make sure the drain hose is straightened all the way to the
drain system.
• If the information code remains, contact a customer service
centre.
DC
Operating the washer with the door open.
• Make sure the door is properly closed.
• Make sure laundry is not caught in the door.
DC1
The Main Door lock/unlock is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 59 2019/8/22 13:42:15
60 English
Troubleshooting
Troubleshooting
Code Action
DC3
The Add Door lock/unlock is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
OC
Water is overowed.
• Restart after spinning.
• If the information code remains on the display, contact a local
Samsung service centre.
LC, LC1
Check the drain hose.
• Make sure the end of the drain hose is placed on theoor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the “LC,LC1” code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
UB
Spinning does not work.
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a at, stable surface.
• Redistribute the load. If only one item of clothing needs
washing, such as a bathrobe or pair of jeans, thenal spin
result might be unsatisfactory, and an “UB” check message will
be shown in the display.
3C
Check the motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service
centre.
3CP
Check the pulsator motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service
centre.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 60 2019/8/22 13:42:15
English 61
Troubleshooting
Code Action
UC
The electronic control needs to be checked (Over Voltage Error).
• Check the PCB and wire harness.
• Check if power is supplied properly.
• If the information code remains, contact a customer service
centre.
Low voltage detected
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service
centre.
HC
High temperature heating check
• If the information code remains, contact a customer service
centre.
1C
The Water Level sensor is not working properly.
• Try power off and restarting the cycle.
• Check WaterLevel Sensor wire harness.
• If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the “1C” code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
8C
The MEMS sensor is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
AC
Check communications between main and sub PBAs.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service
centre.
AC6
Check communications between main and inverter PBAs.
• Depending on the state, the machine may automatically returns
to normal operation.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service
centre.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 61 2019/8/22 13:42:15
62 English
Troubleshooting
Troubleshooting
Code Action
DDC
This message appears when you open the Add Door without
pressing Start/Pause (Hold to Start). If this happens, do one of the
following:
• Press the Add Door to close properly. Then, press and hold
Start/Pause (Hold to Start) and try again.
• To add laundry, open the Add Door and input laundry. Close the
Add Door properly. Then, press and hold Start/Pause (Hold to
Start) to resume operation.
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 62 2019/8/22 13:42:15
64 English
Specications
Specications
Protecting the environment
• This appliance is manufactured from recyclable materials. If you decide to dispose of this
appliance, please observe local waste disposal regulations. Cut off the power cord so that
the appliance cannot be connected to a power source. Remove the door so that animals
and small children cannot get trapped inside the appliance.
• Do not exceed the detergent quantities recommended in the detergent manufacturer’s
instructions.
• Use stain removal products and bleaches before the wash cycle only when strictly
necessary.
• Save water and electricity by only washing full loads (the exact amount depends upon
the program used).
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 64 2019/8/22 13:42:18
English 65
Specications
Specication sheet
“ * Asterisk(s) means variant model and can be varied (0-9) or (A-Z).
Type Front loading washing machine
Model name WW90M64****
Dimensions W600 x D600 x H850 (mm)
Water pressure 50-800 kPa
Net weight 77.0 kg
Wash and spin capacity (Dry clothes) 9.0 kg
Power
consumption
Washing and
heating
220 V 2000 W
240 V 2400 W
Spin revolutions 1400 rpm
Type Front loading washing machine
Model name WW70M64****
Dimensions W600 x D550 x H850 (mm)
Water pressure 50-800 kPa
Net weight 76.0 kg
Wash and spin capacity (Dry clothes) 7.0 kg
Power
consumption
Washing and
heating
220 V 2000 W
240 V 2400 W
Spin revolutions 1400 rpm
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 65 2019/8/22 13:42:18
66 English
Specications
Specications
A
B
C
D
E
WW90M64****
A 600 mm
B 850 mm
C 600 mm
D 680 mm
E 1115 mm
WW70M64****
A 600 mm
B 850 mm
C 550 mm
D 630 mm
E 1065 mm
NOTE
The design and specications are subject to change without notice for quality improvement
purposes.
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 66 2019/8/22 13:42:18
Memo
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 67 2019/8/22 13:42:18
QUESTIONS OR COMMENTS?
REGION CALL OR VISIT US ONLINE AT
HONG KONG SAR
3698 4698 www.samsung.com/hk/support (Chinese)
www.samsung.com/hk_en/support (English)
MACAU SAR 0800 333
DC68-03903G-01
WW90(70)M64FOPW_DC68-03903G-01_EN(PL+).indd 68 2019/8/22 13:42:18
洗衣機
使用說明書
WW90M6***** / WW70M6*****
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 1 2019/8/22 13:46:42
2  繁體中文
目錄
目錄
安全注意事項  4
安全須知  4
重要安全符號  4
重要安全事項  5
有關安裝的嚴重警告事項  6
安裝注意事項  8
 嚴重使用警告  8
使用注意事項  10
嚴重清潔警告  13
安裝  14
包含內容  14
安裝要求  16
逐步安裝  18
開始之前  26
初始設置  26
洗衣常識及竅門  26
洗滌劑抽屜指南  30
操作  33
控制面板  33
簡單啟動步驟  35
程式概觀  36
特殊功能  39
設置  41
SmartThings 42
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 2 2019/8/22 13:46:42
繁體中文  3
目錄
維護  47
環保清潔滾桶+ 47
Smart Check   48
緊急排水  49
清潔  50
凍結後恢復  54
長時間不用時的護理  54
故障排除  55
檢查點  55
錯誤訊息說明  59
技術參數  63
衣物保養符號說明  63
環保資訊  64
規格表  65
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 3 2019/8/22 13:46:42
4  繁體中文
安全注意事項
安全注意事
感謝您選用新型三星洗衣機。該說明書包括關於安裝、使用和保養的重要信息。請仔細閱讀本說明
書,以便您能充分利用本洗衣機的優點和特質。
安全須知
請仔細通讀本說明書,以保證您掌握怎樣安全且有效地操作該新型洗衣機的多種特質和功能。請將手
冊保存在靠近電器的安全地方以備將來參閱。該洗衣機只可用於使用說明書中所述的目的。 
本說明書中的警告和重要安全指示並非包括所有可能發生的情况。您應當依照常識、警告和注意事項
來安裝,維護和操作該洗衣機
由於以下操作指示包括不同型號的洗衣機,因此您所使用的洗衣機的特質可能與本說明書所述內容略
有不同,並非所有警告標誌均適用。如有任何疑問或問題,請聯繫離您附近的客服中心,或通過網址
www.samsung.com獲取網上幫助和信息。
重要安全符號
本使用說明書中圖示及符號的含義:
警告
危險或不安全的操作可能導致嚴重人身傷亡和/或財産損失
小心
危險或不安全的操作可能導致輕微人身傷害和/或財産損失
注意
存在人身傷害或財產損失的危險。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 4 2019/8/22 13:46:42
繁體中文  5
安全注意事項
上述警告標誌用於避免您和他人受傷。 
請嚴格遵守指示。
閱讀完本手冊後,將它存放在安全地方以備將來參閱。
請在使用本洗衣機之前仔細閱讀說明書並謹慎操作。
任何電器和移動部件的設備使用時均有潜在危險。爲了安全起見,操作本洗衣機時請仔細閱讀說明書
並謹慎操作。
重要安全事項
警告
為了降低火災、電擊或人身傷害的風險,在使用該電器時請遵循下列基本注意
事項:
1.  有身體、感覺或智力障礙,或缺少經驗及知識的人士(包括兒童)只有在
護人監護或指導下方可使用本設備,以確保安全使用。
2. 用於歐洲:本設備可供8歲以上兒童以及有身體、感覺或智力障礙或者
少經驗及知識的人士使用,唯須有監護人監護或指導,以確保安全使用本設
備且瞭解可能的危險。兒童不得把玩本設備。不得由兒童且無指導下進行清
潔和使用維護。
3.  應對兒童進行監督,以確保兒童不會在洗衣機周圍玩耍。
4. 電源線損壞,則必須由製造廠商、服務代理商或類似的合格人員進行
換,以免發生危險。
5.  請使用附帶的新水管,而不應再使用舊水管。
6. 底部有通風口,則必須確保通風口未被地毯阻塞。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 5 2019/8/22 13:46:42
6  繁體中文
安全注意事項
安全注意事
7. 用於歐洲:3歲以下兒童應遠離此設備,除非在監督的情況下
8.  小心:為避免因不小心重設熱斷路器而造成危險,本設備不得透過外部開
裝置(例如計時器)供電,或連接至電力公司會定期開關電源的電路
9. 產品僅供家庭使用,不得用於:
商店,辦公室和其他工作環境中的員工廚房區域;
農舍;
酒店,汽車旅館和其他住宅類型的環境;
住宿加早餐旅馆;
公寓樓或自動洗衣店中共用的區域。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 6 2019/8/22 13:46:42
繁體中文  7
安全注意事項
有關安裝的嚴重警告事
警告
本洗衣機必須由合格的技術人員或維護公司進行安裝。
•  否則可能導致電擊、火災、爆炸、洗衣機故障或人身傷害
本電器沉重,因此提升時必須小心。
將電源線插頭插入符合當地電氣規程的牆上插座。使用專用於本設備的插座,并且不要使用延長線。
•  如果通過使用電源板或延長電源綫,與其他電器共用一個墻裝插座,則可能導致電擊或火災。
•  確保電壓、頻率和電流與産品規格相一致。否則可能導致電擊或火災。請將電源插頭牢牢地插入
壁式插座。
用乾布定期將電源插頭的異物(例如灰塵或水)清除。
•  拔出電源插頭,用乾布將其擦乾淨。
•  否則可能導致電擊或火災。
將電源插頭插入墻裝插座,使電源線朝地板延伸。
•  如果您沿著相反方向將電源插頭插入墻裝插座,則可能損壞電纜內部的電綫,並導致電擊或火
災。
由於材料可能存在危險,將所有包裝材料放置在兒童無法接觸的地方。
•  如果小孩將包裝袋置於頭上,則可能導致窒息。
當洗衣機、插頭或電源綫損壞時,請聯繫最近的客服中心。
該洗衣機必須接地。
不得將該洗衣機接至氣管、塑膠水管或電話綫。
•  否則可能導致電擊、火災、爆炸或洗衣機故障。
•  決不可將電源綫插入沒有正確接地的插座,並確保符合當地和國家電氣規程。 
切勿將本電器安裝在加熱器或任何易燃材料附近。
不可將該洗衣機安裝於潮濕、多油或多灰塵的位置、或者直接暴露於陽光或雨水(雨滴)
切勿將本電器安裝在低溫的位置。
•  霜凍可能引起管道爆裂。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 7 2019/8/22 13:46:42
8  繁體中文
安全注意事項
安全注意事
不可將該洗衣機安裝於可能出現氣體洩漏的位置。
•  否則可能導致電擊或火災。
不可使用電子變壓器。
•  否則可能導致電擊或火災。
不可使用損壞的電源插頭、電源綫或者鬆動的墻裝插座。
•  否則可能導致電擊或火災。
不可拉升或過分彎曲電源綫。
不可扭曲或纏繞電源綫。
不可用金屬物體勾住電源綫,或將重物置於電源綫上,或將電源綫插在兩個物體之間,或將電源綫塞
入該洗衣機後面的空隙中。
•  否則可能導致電擊或火災。
拔掉電源插頭時不可拖拉電源綫。
•  握住電源插頭,再將其拔出
•  否則可能導致電擊或火災。
應該將本設備放在易於連接電源插座、進水水龍頭和排水道的地方。
安裝注意事項
小心
本電器應該安裝在輕鬆接觸電源插頭的地方。
•  否則可能因爲漏電而導致電擊或火災。
將您的電器安裝在可以支撐其重量的堅固水平地面。
•  否則可能産生異常振動、移動、噪音或洗衣機故障。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 8 2019/8/22 13:46:42
繁體中文  9
安全注意事項
 嚴重使用警告
警告
如果電器被水淹,請立即關閉供水和電源並聯絡最近的服務中心。
•  不可用濕手觸摸電源插頭。
•  否則可能導致電擊。
如果該洗衣機發出奇怪的噪音、燃燒氣味或煙霧,請立即拔出電源插頭,並聯繫離您最近的客服中
心。
•  否則可能導致電擊或火災。
如果出現氣體洩漏(例如丙烷氣體、煤氣等),請不要觸摸插頭,立即進行通風。不可觸摸洗衣機或
電源綫。
•  不可使用通風機。
•  火花可能導致爆炸或火災。
禁止小孩在洗衣機裏面或上面玩耍。此外,在廢棄該洗衣機時,應將洗衣機的門把手移除
•  如果被困在產品內,兒童可能會窒息死亡。
確保在使用洗衣機之前將底部的包裝物(海綿等)移除。
不可洗滌被汽油、煤油、苯、塗料稀釋劑、酒精或其他易燃或易爆物污染的衣物。
•  否則可能導致電擊、火災或爆炸。
當洗衣機正在運行(高溫洗滌/烘乾/脫水)時,不可強行打開機門。
•  如果水流溢出洗衣機可能引起燙傷或地板濕滑,從而導致受傷。
•  強行打開洗衣機門可能導致洗衣機損壞或人身傷害。
洗衣機正在運行時切勿將手插入洗衣機下面。
•  從而導致受傷。
不可用濕手觸摸電源插頭。
•  否則可能導致電擊。
當洗衣機正在運行時,不可通過拔出電源插頭來關閉洗衣機
•  否則將電源插頭重新插入墻裝插座時,可能引起火花並導致電擊或火災。
切勿讓兒童爬進電器或爬上電器。
•  這樣可能會導致電擊、燒傷或傷害。
當洗衣機正在運行時,不可將手伸入洗衣機或放入金屬物體
•  從而導致受傷。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 9 2019/8/22 13:46:43
10  繁體中文
安全注意事項
安全注意事
切勿拉扯電源線拔出電器插頭。始終緊握插頭將其直接拉出電源插座。
•  電源線的損壞可能導致短路、火災和/或電擊。
不可試圖擅自修理、拆卸或改裝洗衣機。
•  不可使用除標準保險絲以外的任何其他保險絲(例如:銅絲或鋼絲等)。
•  當電器需要維修或重新安裝時,請聯絡最近的服務中心。
•  否則可能導致電擊、火災、洗衣機故障或人身傷害。
如果供水軟管從水龍頭鬆脫並淹沒電器,請拔出電源插頭。
•  否則可能導致電擊或火災。
當長時間不使用洗衣機時,或打雷、暴雨天氣時,請拔出電源插頭。
•  否則可能導致電擊或火災。
如果異物進入電器,請拔出電源插頭並聯絡最近的三星客戶服務站。
•  否則可能導致電擊或火災。
請勿讓兒童(或寵物)在洗衣機上面或內部玩耍。洗衣機門無法輕易從裏邊打開,兒童如果被困在機
內會導致嚴重受傷。
使用注意事項
小心
當洗衣機被異物(例如去污劑、灰塵、食品廢物等)污染時,請拔出電源插頭並用濕潤的軟布清潔洗
衣機。
•  否則可能導致變色、變形、損壞或生銹。
強烈撞擊可能損壞前門玻璃。使用洗衣機時請注意。
•  如果玻璃被損壞,可能導致人身傷害。
停水之後或重新連接供水軟管時,請緩慢打開水龍頭。
長久時間不用之後,緩慢打開水龍頭。
•  供水軟管或水管中的氣壓可能損壞產品部件或導致漏水。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 10 2019/8/22 13:46:43
繁體中文  11
安全注意事項
如果運行期間出現排水問題,請檢查是否存在排水故障。
•  如果洗衣機正在使用時由於排水問題被淹沒,則可能導致電擊或火災。
將待洗衣物完全放入洗衣機中,確保衣物不會被門卡住。
•  如果衣物被門卡住,可能導致衣物或洗衣機損壞或漏水。
洗衣機不用時,請關閉供水。
確保供水連接軟管上的螺絲適當擰緊。
•  否則可能導致財産損壞或人身傷害。
確保橡膠密封和前門玻璃沒有被異物(例如廢棄物、線、頭髮等)污染。
•  如果異物被門卡住或閘未完全閉合,則可能導致漏水。
打開水龍頭,並檢查供水連接軟管是否被擰緊,確保在使用前不會漏水。
•  如果供水軟管連接器上的螺絲鬆脫,則可能導致漏水。
您購買的本產品專為家庭使用而設計。
將產品用於商業用途可視為產品濫用。在此情況下,產品將不在三星提供的標準保修範圍之列,並且
三星對因濫用而導致的故障或損壞概不負責。 
不可站立在洗衣機上,或將物體(如衣物、點亮的蠟燭、香煙、碗碟、化學藥品、金屬物體等)放置
在洗衣機上。
•  否則可能導致電擊、火災、洗衣機故障或人身傷害。
不可將揮發性物質(如殺蟲劑)噴灑在洗衣機表面。
•  否則會有害於人體,可能導致電擊、火災或洗衣機故障。
切勿在洗衣機附近放置會產生電磁場的物品。
•  否則可能由於故障而導致人身傷害。
高溫清洗或烘乾洗程排出的水是熱的。切勿觸摸。
•  否則可能導致燙傷或其他傷害。
如果在排水之前水溫很高,則需要一段時間直到溫度下降,並且根據內部溫度可能會有所不同。
除非您的洗衣機有洗滌以下物品的特殊程式,否則不可對防水墊或防水衣物(*)進行洗滌、脫水或烘
乾。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 11 2019/8/22 13:46:43
12  繁體中文
安全注意事項
安全注意事
(*):羊毛被褥、防雨罩、釣魚服、滑雪褲、睡袋、尿布兜、運動套裝,以及單車、電單車和汽車罩等。
•  即使說明標簽上有洗衣機標誌,也不可洗滌硬質厚墊。否則可能因爲異常振動而導致受傷,或洗
衣機、墻體、地面或衣物損壞
•  切勿清洗具有橡膠背襯的小塊地毯或地墊。橡膠背襯可能脫落並粘附在洗衣桶內,這樣可能會發
生故障,例如排水錯誤。
當洗滌劑抽屜被移除時,不可操作洗衣機。
•  否則可能因爲漏水而導致電擊或受傷。
在烘乾期間,或烘乾完之後,洗衣桶溫度很高,不可觸摸其內部。
•  否則可能導致燙傷。
洗滌與烘乾過程中,機門玻璃會變熱。因此,請勿碰觸機門玻璃。
而且,也不要讓小朋友在洗衣機周圍玩耍或碰觸機門玻璃。
•  否則可能會導致燙傷。
不可將手伸入洗滌劑抽屜。
•  因為您的手可能會被洗滌劑輸入裝置卡住而導致受傷。
•  液體洗滌劑盒(適用型號)不可使用粉狀洗滌劑。如果使用粉末狀洗滌劑請取出液體洗滌劑盒。
不可將非衣物類的任何其他物品(例如鞋子、食物垃圾或動物)放入洗衣機。
•  否則可能損壞洗衣機,或由於異常振動而導致寵物受傷或死亡。
不可使用利器(例如針、刀或手指甲等)來按動按鈕。
•  否則可能導致電擊或受傷。
不可洗滌被油漬、乳酪弄髒、或護膚店、按摩診所經常使用的衣物。
•  否則可能導致橡膠密封變形和漏水。
不可將金屬物長時間遺留在洗衣桶中,例如安全別針、髮夾或漂白劑。
•  否則可能導致洗衣桶生銹。
•  如果洗衣桶表面開始生銹,則將清潔劑(中性)塗抹在表面上,並用海綿清洗。禁止使用金屬
刷。
不可直接使用乾洗劑,不可對被乾洗劑弄髒的衣物進行洗滌、過水、或脫水。
•  否則可能因爲油的氧化物變熱而導致自燃或灼燒。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 12 2019/8/22 13:46:43
繁體中文  13
安全注意事項
不可使用來自水冷卻/加熱裝置的水。
•  否則可能引起洗衣機故障。
不可將手洗肥皂用於該洗衣機
•  如果該肥皂變硬並積聚在洗衣機內部,則可能引起洗衣機故障、變色、生銹或異味。
將短襪和胸圍放入洗滌網,並和其他衣物一起洗滌。
不可在洗滌網內洗滌大件物品,例如被褥。
•  否則可能因爲異常振動而導致受傷。
不可使用變硬的洗滌劑。
•  如果它積聚在洗衣機內部,則可能導致漏水。
確保所有待洗衣物的口袋清空
•  硬質和鋒利物體,例如硬幣、安全銷、釘子、螺絲或石頭等,可能導致洗衣機的損壞。
帶金屬的內衣在洗滌過程中可能會有金屬穿破內衣的現象,
根據其色牢度按照顏色對衣物進行分類並選擇推薦的程式、水溫和其他功能。
•  否則可能會導致褪色或織物受損。
關門時注意兒童的手指有沒有被門卡住。
•  否則可能會導致傷害。
嚴重清潔警告
警告
不可直接用水噴灑在洗衣機上進行清洗。
請勿使用強酸洗劑。
不可用苯、稀釋劑或酒精清洗該洗衣機。
•  否則可能導致變色、變形、損壞、觸電或火災。
在清洗或進行維護前,將插頭從墻裝插座中拔出。
•  否則可能導致電擊或火災。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 13 2019/8/22 13:46:43
14  繁體中文
安裝
安裝
請仔細遵循這些說明,確保正確安裝洗衣機並避免洗衣時出現意外。
包含內容
確保產品包中包含所有部件。如果您對洗衣機或部件有何疑問,請聯繫當地三星客戶中心或零售
商。
12
06
08
07
01
02
03
04
05
10
09
11
01  釋放杆 洗滌劑抽屜 03  控制面板02
04 06 機門 05  洗衣桶 排水泵過濾器
07 09 緊急排水軟管 08  底部擋板 頂蓋
10  電源插頭 11  排水管 12  調整腳
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 14 2019/8/22 13:46:43
繁體中文  15
安裝
扳手 螺栓孔蓋 水管定位器
冷水管 熱水管 液體洗滌劑盒
T型孔蓋
注意
•  螺絲帽:螺栓孔蓋的數目取決於產品型號(3至6個孔蓋)。
•  熱水管:僅限適用型號。
•  液體洗滌劑盒:僅限適用型號。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 15 2019/8/22 13:46:44
16  繁體中文
安裝
安裝
安裝要求
供電和接地
•  220-240V、50Hz的保險絲或斷路器
•  為洗衣機供電的專用分支電
為確保正確接地,洗衣機附帶一根具有三腳接地
插頭的電源線,用於安裝正確且接地的插座。
如果不確定是否接地,請諮詢合格電工或維修人
員。 
請勿改裝提供的插頭。如果與插座不匹配,請致
電合格電工安裝匹配的插座。
警告
•  請勿使用延長線。
•  請僅使用洗衣機配備的電源線。
•  請不要把接地線連在塑膠管、煤氣管道或者
熱水管道上。
•  連接不正確的接地導線可能導致電擊。
供水
此洗衣機的合適水壓介於50kPa至800kPa之間。
當水壓低於50kPa時可能會導致水閥失靈。或者
可能需要更長的時間來注滿桶,也會導致洗衣機
關機。進水龍頭必須在您洗衣機後部的120cm
範圍以內,以便進水管方便連接您的洗衣機和水
龍頭。
預防漏水的風險:
•  確保水龍頭方便連接。
•  當洗衣機不使用的時候,關掉水龍頭。
•  定期檢查進水軟管裝置是否有任何洩漏。
小心
在使用您的洗衣機前,應先檢查進水閥和水龍頭
上所有的連接以防漏水。
排水
三星建議使用高度為60-90cm的垂直管道。排水
管必須經由排水管夾延伸至垂直管道。而垂直管
道必須完全蓋住排水管。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 16 2019/8/22 13:46:44
繁體中文  17
安裝
室內地面
為了獲得最佳性能,洗衣機必須安裝在牢固的地
面上。為了使振動或不平衡的負荷最小化,木地
板需要進一步加固。地毯和軟瓷磚表面抗振效果
不佳,可能導致洗衣機在脫水程式中有稍許移
動。
小心
不要把您的洗衣機放在平臺或者支撐較弱的結構
上。
水溫
不要把洗衣機放置在水易結冰的地方,因為您的
洗衣機的水閥、排水泵和/或軟管等處會殘留一
些水。留在連接部件中的冷凍水可能導致皮帶、
泵和洗衣機中的其他組件損壞
洗衣機安裝環境要求
實現穩定操作的最小間隙:
兩側 25 mm
頂部 25 mm
後面 50 mm
前面 550 mm
若您將洗衣機和乾衣機放置在一起,則您需要確
保在機器前預留至少550mm的暢通空間。若您
只單獨放置一台洗衣機,則不需要特定的空間要
求。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 17 2019/8/22 13:46:44
18  繁體中文
安裝
安裝
逐步安裝
步驟1  選擇安裝位置
位置要求:
•  安裝在堅硬平坦的水平地面,沒有可能妨礙通風的地毯或地板等
•  避免日光直射
•  有用於通風和佈線的足夠空
•  環境溫度始終高於冰點 (零度)
•  始終遠離熱源
步驟2  拆除運輸螺釘
拆開產品包裝,取出所有的運輸螺釘。
注意
運輸螺釘的數量可能因型號而異。
警告
包裝材料可能對兒童有危險。請把所有包裝材料(塑膠袋、聚苯乙烯等)置於兒童不能觸及的地方。
A
1.  運輸螺釘放置在洗衣機後側(圖中標有圓
圈)。
小心
請勿卸下固定排水管夾的螺絲(A)。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 18 2019/8/22 13:46:44
繁體中文  19
安裝
2. 使用隨附的扳手,逆時針旋轉所有運輸螺
釘,將其鬆開。
注意
存妥運輸螺釘,以供日後使用
A
B
3.  將螺釘孔蓋(B)插入孔中(圖中標有圓圈)。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 19 2019/8/22 13:46:44
20  繁體中文
安裝
安裝
步驟3  調整平衡支腳
1.  輕輕將洗衣機滑動至適當的位置。用力過大
可能會損壞平衡支腳。
2. 手動調節平衡支腳,調平洗衣機。
3.  完成調平後,使用扳手擰緊螺母。
步驟4  連接水
提供的水管連接器可能因型號而不同。此步驟指導您連接連接器型接頭。如果您使用螺紋式接頭,請
參見第7項。
A
B
連接水管到水龍頭。
1.  移除水管(B)上的接頭(A)。
2. 使用十字螺絲刀鬆開接頭上的四顆螺釘。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 20 2019/8/22 13:46:45
繁體中文  21
安裝
C
3.  握住接頭,按箭頭方向轉動部件(C)將其
擰鬆5mm(*)。
C
4. 將接頭插入水龍頭,提起接頭以擰緊螺釘。
5.  按箭頭方向轉動部件(C)將其擰緊。
E
6. 在按下部件(E)時,將供水軟管連接至接
頭。然後,釋放部件(E)。咔嗒一聲,軟管
卡入接頭。
7. 如果使用螺紋式水龍頭,則如圖所示,使用
提供的螺紋式接頭連接至水龍頭。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 21 2019/8/22 13:46:45
22  繁體中文
安裝
安裝
8.  將水管的另一端連接至洗衣機背部的進水
閥。順時針方向旋轉軟管以擰緊。
9. 打開水龍頭,檢查連接周圍是否有任何洩
漏。如果有漏水,則重複上述步驟。
警告
如果漏水,請停止使用洗衣機,並聯繫當地三星服務中心。否則,可能導致電擊。
小心
請勿用力拉伸水管。若該水管太短,請使用更長的高壓水管更換該水管。
注意
•  將水管連接至接頭後,向下拉水管,檢查是否連接正確。
•  使用常用類型的水龍頭。如果水龍頭是方形的或太大,則先移除隔離墊圈,再將接頭插入水龍
頭。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 22 2019/8/22 13:46:45
繁體中文  23
安裝
適用於帶有額外熱水進水的型號:
1.  將熱水供應軟管的紅色端連接至洗衣機背部
的熱水進水口。
2. 將熱水供應軟管的另一端連接至熱水龍頭。
水軟管(僅限適用型號)
A
水軟管提醒用戶有漏水風險。其檢測水流,如果
有洩漏,中心指示燈(A)將變紅。
注意
止水軟管的末端必須安裝在水龍頭而不是機器上。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 23 2019/8/22 13:46:46
24  繁體中文
安裝
安裝
步驟5  定位排水管
可採用三種方式定位排水管:
A
水槽邊緣之上
排水管必須放置在距地面60cm至90cm(*)的高
度。要使排水管的噴嘴彎曲,請使用提供的塑
膠軟管導向(A)。使用吊鉤將定位器固定到牆
壁,確保穩定排水。 
連接排水道
排水道長度必須為60cm至90cm (*)。建議使
65cm高的垂直管道。確保排水管傾斜連接至垂
直管道。
垂直排水管要求:
•  最小直徑:5cm
•  最低排水量:每分鐘60L
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 24 2019/8/22 13:46:46
繁體中文  25
安裝
連接至水槽排水道分支
排水道分支必須高於水槽虹吸管,軟管的端部至
少高於地面60cm。
(*):60cm
步驟6  連接洗衣機電源
將電源線插入壁式插座,其採用保險絲或斷路器保護的220-240V/50Hz認證的插座。然後按下電源鍵
打開洗衣機。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 25 2019/8/22 13:46:46
26  繁體中文
開始之前
開始之前
初始設置
運行校準(推薦)
校準可確保洗衣機準確檢測重量。確保在運行校準前洗衣桶是空的。
1.  關閉電源,然後打開洗衣機
2. 同時按住溫度和延遲完成持續3秒,進入校準模式。顯示「CB」訊息。
3.  按啟動/暫停(洗程啟動)運行校準。
4. 洗衣桶將順時針和逆時針旋轉數約3分鐘。
5.  當程式完成後,顯示屏上出現「 」,洗衣機將自動關閉。現在可以使用洗衣機了。0
洗衣常識及竅門
步驟1 分類
根據以下標準對衣物分類:
•  按面料保養標籤分類:衣物可分類為棉織品、混紡面料、合成纖維、絲綢、羊毛面料及人造纖維
等。
•  按顏色分類:將白色衣物單獨分開。
•  按大小分類:將不同大小的衣物一起混在洗衣桶內可提高洗滌性能。
•  按耐磨程度分類:單獨洗滌精細衣物,例如純新羊毛製品、窗簾和絲綢製品。檢查物品上的標
籤。
注意
確保檢查衣物上的洗護標籤,並在開始洗滌之前對其進行相應分類。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 26 2019/8/22 13:46:46
繁體中文  27
開始之前
步驟2 清空口袋
清空衣物的所有袋子
•  衣服上的金屬物體(如硬幣、別針和搭扣)可能損壞其他衣物和洗衣桶。
將配有鈕扣和繡花衣服的口袋翻出來
•  如果褲子拉鍊或夾克拉鍊在洗滌時敞開,洗衣桶可能會受到損害。拉鍊應該合上並用細繩固定。
•  配有長繩的衣物可能和其他衣服纏在一起。在開始洗滌前確保將繩子固定。
步驟3  使用洗滌網
•  胸圍(可水洗)必須放入洗滌網中。胸圍的金屬部分可能穿透材料並損壞其他衣物。
•  小而輕的物品,例如襪子、手套、絲襪和手絹可能卡在門上。建議裝入洗滌網中洗滌。
•  切勿單獨洗滌未裝衣物的洗衣網。這樣可能導致異常振動,引起洗衣機移位並導致傷害。
步驟4  預洗(如有必要)
如果衣物特別臟可以在選擇的程式中加選預洗選項。洗滌劑手動添加到滾桶或使用液體洗劑時不要使
用預洗選項。
步驟5  確定洗衣量
請勿裝入過量衣物。超載可能會導致洗衣機工作不正常。有關衣物類型的負載容量,請參閱第36頁。
注意
洗滌被褥或被罩時,洗滌時間可能延長或者脫水效果可能降低。對於被褥或被罩,推薦的最大脫水洗
程速度為800rpm並且衣物容量為2.0kg或以下。
小心
•  衣物不平衡可能降低脫水性能。
•  確保衣物完全放入洗衣槽中並且沒有被機門卡到。
•  不要砰地一聲關上機門。輕輕關好機門。否則,機門可能無法正常關閉。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 27 2019/8/22 13:46:46
28  繁體中文
開始之前
開始之前
步驟6  添加合適的洗劑類型
洗滌劑類型根據織物類型(棉質衣物、合成纖維、精緻衣物、羊毛衣物)、顏色、清洗溫度和沾污度
來定。確保使用專為自動洗衣機設計的洗滌劑。
注意
•  請參照洗劑製造商建議的衣物重量、髒污程度及所在地區的水質硬度。如果您不知道水的硬度,
請諮詢當地的水利局。
•  切勿使用容易會硬化或固化的洗劑。這種洗滌劑可能在過水洗程中殘留下來,而堵塞排水出口。
•  如果在洗滌期間出現太多泡沫,將顯示「Sud」消息。
小心
使用羊毛衣物 程式洗滌羊毛衣物時,請使用專用於羊毛製品的洗滌劑。如果在羊毛衣物 洗程中使
用粉末洗劑,它可能殘留在衣物上並導致衣物褪色。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 28 2019/8/22 13:46:46
繁體中文  29
開始之前
洗衣膠囊
想要獲得使用洗衣膠囊的最佳效果,請按照這些說明進行操作。
1.  將膠囊放在空滾桶的底部靠後處。
2. 將衣物放入滾桶中膠囊的上面
小心
對於使用冷水或在不到一小時完成的洗程,膠囊可能不會完全溶解。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 29 2019/8/22 13:46:47
32  繁體中文
開始之前
開始之前
小心
•  不要將洗衣粉添加至液體洗滌劑盒。
•  濃縮的織物柔軟劑,使用前必須用清水進行
稀釋。
•  不要將主洗洗滌劑添加至 柔順劑分隔間。
使用液體洗滌劑(僅限適用型號)
A
先在 主洗分隔間放入提供的液體洗滌劑盒。
然後添加液體洗滌劑至盒內最高刻度線(A)以
下。
小心
•  不要超過盒內標記的最高刻度線。
•  如果使用粉狀洗滌劑請將液體洗滌劑導流器
向上翻起。
使用液體洗滌劑時 使用粉末狀洗滌劑時
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 32 2019/8/22 13:46:48
34  繁體中文
操作
操作
08  泡泡浸技術
按下啟動/停用泡泡浸技術功能。該功能有助於消除各種頑固污漬。
•  泡泡浸技術有助於消除各種頑固污漬。
•  選中泡泡浸技術後,衣物將徹底浸泡在水泡中進行有效的清洗。
•  泡泡浸技術適用於如下程式最多30分鐘:棉質衣物,合成纖維,床單,
蒸氣除菌,超快洗。
09 易熨燙 降低脫水旋轉速度以減少衣物的皺摺。
•  將脫水速度設定為800 rpm。
10  智能控制 按下啟動/停用智能控制功能。智能控制功能啟動時,您可以使用移動設備
來控制洗衣機。更多信息,參見第 頁SmartThings章節。42
11  電源 按下打開/關閉洗衣機。
12  啟動/暫停(洗程
啟動) 按住可開始啟動洗程,或按下臨時暫停洗程。
有關這些選項的更多信息,請參閱特殊功能部分。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 34 2019/8/22 13:46:48
繁體中文  35
操作
簡單啟動步驟
4
1
6
2
3
5
1.  按下電源鍵打開洗衣機。
2. 在程式面板選擇一個程式。
3.  根據需要,更改洗程設置(溫度,過水和脫水)。
4. 要添加功能,按下功能。再次使用該按鈕選擇定制項目。
5.  本機提供了便於選擇泡泡浸技術,易熨燙和智能控制的按鍵。要使用選項,請按相應的按鍵。
6. 按住啟動/暫停(洗程啟動)
在運行過程中更改程式
1.  按下啟動/暫停(洗程啟動)停止運行。
2. 選擇別的程式。
3.  再次按啟動/暫停(洗程啟動)啟動新的洗程。
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 35 2019/8/22 13:46:48
36  繁體中文
操作
操作
程式概觀
標準程式
程式 說明和最大洗衣量(kg)
棉質衣物 •  用於棉織物、被單和枕套、餐布、內衣、毛巾或襯衫。
洗滌時間和過水程式的次數根據負載自動調整。 最大
 節能棉質衣物
•  對於棉織物、被單和枕套、餐布、內衣、毛巾或襯衫,使
更少的能源實現最佳性能。 
為了節能,實際的洗滌溫度可能低於規定值。
最大
合成纖維 •  於用聚酯(迪奧綸、聚酯纖維)、聚醯胺(貝綸、尼龍)或
類似材料製成的短上衣或襯衫4
輕柔衣物 •  適用於敏感衣物,如人造纖維,粘膠纖維和合成混紡纖維。
•  為了獲得最佳性能,使用液體洗滌劑。 2
過水+脫水   對衣物加入織物軟化劑後,採用額外過水。 最大
排水/脫水 •  選擇此程式排水並旋轉滾筒 最大
環保清潔滾桶+
•  此洗程可去除洗衣槽的髒污和細菌,清潔洗衣槽。
•  通過去除墊圈上的污垢清潔橡膠門墊圈。
•  在不加入洗滌劑或漂白劑的情況下,每40次洗滌執行一次。
每40次洗滌後自動通知。
•  確保洗衣桶是空的。
•  請勿使用任何清潔劑清潔洗衣桶。
-
15分鐘快洗
適用於輕度髒污,不足2.0kg且需要快洗的衣物。
•  使用少於20g的洗衣劑。使用超過20g的洗衣劑可能會留下洗
衣劑殘留。
•  對於液體洗衣劑,最多使用20毫升液體洗衣劑。
2
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 36 2019/8/22 13:46:49
繁體中文  37
操作
程式 說明和最大洗衣量(kg)
超快洗
•  適用於日常洗滌物品,例如內衣和襯衣,可在39分鐘內快速
完成。
•  程式時間將根據供水條件,衣物的負荷和類型而不同。
5
超節能洗 •  低溫泡泡浸技術程式有助於降低能耗。 4
羊毛衣物 
•  於用清洗不到2.0 kg的可機洗羊毛織物
•  羊毛衣物程式採用輕柔的搖擺洗法和浸泡動作,從而保護
毛纖維發生收縮/扭曲變形。
•  建議採用中性洗滌劑。
2
戶外防水衣物 •  用於採用彈性合成纖維、彈力材料和微纖維等功能材料製成
的戶外服、滑雪服和運動服。 2
Steam Cycles
在程式運行期間可能看不到蒸氣。這是正常現象。
床單
•  適用於洗滌床罩、床單、被套等。
•  為了達到最佳效果,只洗滌1種類型的床上用品,並確保負載
的重量不超過2.0 kg。
2
蒸氣除菌
•  與皮膚直接接觸的棉和亞麻織物,例如 內衣。為獲得最佳殺
菌效果,請選擇60°C或更高的溫度。
•  蒸氣程式包括過敏護理和消除細菌(消毒)。
4
WW90(70)M64FOPW_DC68-03903G-01_HKTC(PL+).indd 37 2019/8/22 13:46:49


Produkt Specifikationer

Mærke: Samsung
Kategori: Vaskemaskine
Model: WW70M64FOPW

Har du brug for hjælp?

Hvis du har brug for hjælp til Samsung WW70M64FOPW stil et spørgsmål nedenfor, og andre brugere vil svare dig




Vaskemaskine Samsung Manualer

Vaskemaskine Manualer

Nyeste Vaskemaskine Manualer