Sanwa YX360TRF Manual

Sanwa Multimeter YX360TRF

Læs gratis den danske manual til Sanwa YX360TRF (3 sider) i kategorien Multimeter. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Sanwa YX360TRF, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

*1 Not including the resistance of fuse.

*2 The maximum value when the pointer was moved by

charged current in the capacitor.

DCVCV

DCACV

0.1

±5 % against

full scale

±5 % against

full scale

±4 % against

full scale

±3 % against

full scale

±3 % against

full scale

±3 % against

full scale

±3 % of arc

±5 % of arc

Approximate Value

Input impedance 20 kΩ/V

Input impedance 40 k

Ω/V

Input impedance 9 kΩ/V

Current across test pins

Input impedance 9 k

Ω/V

30 Hz ~ 100 kHz within

±3 % f.s. (AC 10 V range)

Center value 20 Ω

Max. value 2 kΩ

Release voltage 3 V

*1 Voltage drop 0.1 V

*1 Voltage drop 0.25 V

Input impedance 9 kΩ/V

250/1000

10/50/250/750

2.5 m/25 m/0.25

2 k/20 k/200 k/2 M

(X1/X10/X100/X1 K)

-10 dB

~ +

22 dB

(for 10 VAC)

~ +

62 dB

0 ~ 150 mA at X1 range

0 ~ 15 mA at X10 range

0 ~ 1.5 mA at X100 range

0 ~ 150 µA at X1 K range

0 ~

1.5 µA at X100 K range

200 M

(X100 K)

DC 25 kV

1000 atX10 range

HV-10T probe

HFE-6T probe

DCV

(NULL)

ACV ~

HV (DC

high volt)

Use the optional probe

YX360TRF

MULTITESTER

INSTRUCTION MANUAL

05-130620402040

SANWA ELECTRIC

INSTRUMENT CO.,LTD.

Dempa Bldg., 4-4 Sotokanda 2-Chome

Chiyoda-Ku,Tokyo,Japan

NAMES OF COMPONENTS

Test probe (black)

Test pins

Finger guards

Test probe (red)

Removable

test pin covers

When not

covered

− 1 − − 2− − 3−

INTRODUCTION

Thank you for purchasing a SANWA tester Model YX360TRF. You are

kindly requested to thoroughly read this manual before use for safety.

Especially, “SAFETY INFORMATION” and “MEASURING PROCE-

DURE” are important. Keep this manual together with the tester so as

no to lose it.

Fig. 1

SAFETY INFORMATION

SPECIFICATIONS

The following are precautions to prevent accidents such as electrical

shocks.

Be sure to read them before using the tester.

Symbols

The following cautionary signs appear on the multitester and

in this manual.

Disobedience to instructions with this sign may lead to trouble

with the tester and accidents such as electrical shock.

This sign cautions that high voltage is applied to parts marked

with it.

Precautions for Safety Measurement

To ensure that the meter is used safely, follow all safety and operat-

ing instructions.

11. Never use the meter on the electric circuits that exceeds 3 kVA.

12. Pay special attention when measuring the voltage of AC 33 Vrms

(46.7 V peak) or DC 70 V or more to avoid injury.

13. Never apply input signals exceeding the maximum rating input

value.

14. Never use the meter for measuring the line connected with equip-

ment (i.e. motors) that generates induced or surge voltage since it

may exceed the maximum allowable voltage.

15. Never use the meter if the meter or test leads are damaged or broken.

16. Never use an uncased meter.

17. Be sure to use a fuse of the specified rating or type. Never use a

substitute of the fuse or make a short circuit of the fuse.

18. Always keep your fingers behind the finger guards on the probe

when making measurements.

19. Be sure to disconnect the test pins from the circuit when changing

the function or range.

10. Before starting measurement, make sure that the function and

range are properly set in accordance with the measurement.

11. Never use the meter with wet hands or in a damp environment.

12. Never use test leads other than the specified type.

13. Never open the case except when replacing batteries or fuses. Do

not attempt any alteration of original specifications.

14. To ensure safety and maintain accuracy, calibrate and check the

meter at least once a year.

15. Indoor use only.

WARNING

− 5− − 6− − 7−

BODY COVER, TEST LEADS, HAND STRAP

Use of Cover (example for the body cover)

When this tester is out of use:

Attach the cover to the panel face for safekeeping.

When measuring:

Attach it either to the rear case side

or use it as a stand as shown below.

Storage of Test Leads

When placing the test leads in the

storage space, roll it 3 times, then

put in the test pin side first as shown

below.

Attachment of Hand Strap

1 Loosen the screws fixing the rear

case and remove it.

2 Hand strap is attached to con-

necting point.

3 Put back the rear case where it

was and fix it with the screws.

Fig. 2

− 4−

SCALE READING

Range Multiplied

Ω X 100 k X 100 k

Ω X 1 k X 1 k

Ω X 100 X 100

Ω X 10 X 10

Ω X 1 X 1

DCV 250 X 1

DCV 2.5 X 0.01

DCV 0.25 X 0.001

ACV 250 X 1

DCA 0.25 X 0.001

DCA 25 m X 0.1

DCA 2.5 m X 0.01

DCV 50 X 1

ACV 50 X 1

DCA 50 µ X 1

DCV 0.1 X 0.01

Range Multiplied

DCV 10 X 1

DCV 1000 X 100

ACV 750 X 100

ACV 10 X 1

C (µF) X 1

DCV ± 25 X 1

DCV ± 5 X 1

150 mA at X 1 X 10

15 mA at X 10 X 1

1.5 mA at X 100 X 0.1

150 µA at X 1 k X 10

1.5 µA at X 100 k X 0.1

LV X 1

X 1

ACV 10 X 1

ACV 50 14 dB added

ACV 250 28 dB added

ACV 750 40 dB added

General Specifications

(Temperature : 23±2 ˚C humidity 75 % RH max. No condensation)

Drop shock proof

A taut-band structure is adopted in the meter part.

The meter part is designed to withstand shock.

Circuit protection

The circuit is protected by fuse even when voltage of up

to AC 230 V is impressed on each range for 5 seconds.

Internal battery

Internal fuse

R6 (IEC) or UM-3 1.5 V X 2

F500 mAH/250 V Ø5.2 X 20 mm Fast acting fuse

Operating temperature

and humidity range

5 ~ 31 ˚C, 80 %RH max.

31< ~ 40 ˚C, 80 ~ 50 %RH (decreasing linearly)

Withstand voltage

Dimensions and mass

6 kV AC (1 min.) between input terminal and case

159.5 X 129 X 41.5 mm/ approx. 320

Storage temperature/

Humidity

-10 ~ 50 ˚C 70 %RH max. No condensation

noitacificepSsmetI

Application

This instrument is portable multitester designated for meas-

urement of weak current circuits.

The specifications described in this manual are subject to

change without notice.

Measurement Range and Accuracy

Function Full scale value Accuracy Remarks

0.25/2.5/10/50

±3 % against

full scale

DRAWING No.YX360TRF 05-1306 2040 2040

APPLICATION

•

HV probe, HV-10T

•

probe, HFE-6T

•

Test lead for repair, TL-6ITb

Accessories Instruction manual 1, Hand strap 1,

Environmental condition

Operating a ltiude up to 2000 m pollution degree 2

YX360TRF04B4初11.5.129:31AMページ1

・

Produkt Specifikationer

Mærke:	Sanwa
Kategori:	Multimeter
Model:	YX360TRF

Har du brug for hjælp?

Hvis du har brug for hjælp til Sanwa YX360TRF stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Multimeter Sanwa Manualer

24 Juni 2025

23 Juni 2025

8 December 2024

8 December 2024

8 December 2024

7 December 2024

Sanwa YX-361TR Manual

29 August 2024

Sanwa YX360TRF Manual

29 August 2024

Sanwa SP21 Manual

29 August 2024

Sanwa VS-100 Manual

29 August 2024

Multimeter Manualer

Nyeste Multimeter Manualer

Megger BMM2500 Manual

11 Oktober 2025

Megger DCM330 Manual

11 Oktober 2025

Megger DCM310 Manual

11 Oktober 2025

Megger DCM1500S Manual

11 Oktober 2025

Megger DCM300E Manual

11 Oktober 2025

Megger MET1000 Manual

11 Oktober 2025

Weidmüller Multimeter 125S Manual

7 Oktober 2025

Weidmüller VT Digi Pro Manual

7 Oktober 2025

Metra Install Bay 3320 Manual

5 Oktober 2025

HT Instruments Ironmeter Manual

3 Oktober 2025