Saramonic Vmic Manual

Saramonic Mikrofon Vmic

Læs nedenfor 📖 manual på dansk for Saramonic Vmic (2 sider) i kategorien Mikrofon. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

www.saramonic.com

The Saramonic logo is trademark which is registered

and owned by Saramonic International.

A brand of DSQN

Email: info@saramonic.com

2.2 Attach the Vmic to your camera’s or camcorder’s hot shoe. Connect

the supplied audio transmission line from Vmic’s audio output to the MIC

input of the camera or camcorder.

Audio output jack

Headphone output

Battery compartment

2 Set Up Guide

2.1 Install the battery

Lock the battery compartment

Unlock the battery compartment

Insert the AA batteries into place aligning + and - polarity as shown.

Vmic

The Saramonic Vmic is a b oadcast quality condenser microphone r

that provides professional audio with DSLR cameras and camcorders.

1 Product Introduction

1.1 General Introductions

The Vmic is a broadcast quality condenser microphone that provides

professional audio with DSLR cameras and camcorders. The Vmic allows

you to adjust level control (-10dB, 0dB, +20dB), high-pass ﬁlter(150 Hz), and

high-frequency boost(+6dB) to increase intelligibility of dialogue. The

detachable 3.5mm cable connects the Vmic to the audio input of the

camera, while the stereo headphone output allows you to monitor the

incoming audio. The shock mount system provides isolation from

vibration and mechanical noise.

1.2 Highlights

• Super-cardioid polar pattern

• Integrated shock mount system

• High pass ﬁlter (150 Hz)

• High frequency boost (+6dB)

• Three position level control (-10dB, 0dB, +20dB)

• Headphone monitor output

• 1/8’’ audio output jack to camera

• LED power on/low battery indicator

• Wind shield included

• Lightweight all-mental construction

• Powered by two AA batteries

1.3 Product Structure

Three position level control (-10dB, 0dB, +20dB)

LED indicator

Power button

High frequency boost (+6dB)

High-pass ﬁlter (150Hz)

To attenuate signals with frequencies lower than 150 Hz. It can be used

to remove rumble or other low frequency noise while recording.

Integrated shock mount

Produkt Specifikationer

Mærke:	Saramonic
Kategori:	Mikrofon
Model:	Vmic
Type:	Mikrofon til digitalkamera
Produktfarve:	Sort
Batteriteknologi:	Alkaline
Strømforsyningstype:	AA
Forbindelsesteknologi:	Ledningsført
Strømkilde:	Batteri
Antal understøttede batterier:	2
Enhedsgrænseflade:	3.5 mm (1/8")
Mikrofonindgangsimpedans:	200 ohm (Ω)
Mikrofon frekvens:	35 - 20000 Hz
Udgang til hovedtelefoner:	Ja
Mikrofon sensitivitet:	40 dB
Mikrofon vægt:	196 g
Antal produkter inkluderet:	1 stk
Signal/støjforhold:	75 dB
Dimensioner (BxDxH) med stativ:	255 x 66 x 80 mm