Sekonic L-508 Manual


Læs nedenfor 📖 manual på dansk for Sekonic L-508 (2 sider) i kategorien Lichtmeter. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Quick Guide to the Sekonic L-508
SPOT/INCIDENT
SELECTOR
SWITCH
MEASURE
1*-4* ZOOM
SPOT RING
RETRACTABLE
LUMISPHERE
ON/OFF
SET/CHANGE
DIAL
ZOOM SPOT
EYEPIECE
MEMORY
CLEAR
(see instructions)
MEMORY
(see instructions)
AVERAGE/EV
BRIGHTNESS
DIFFERENCE
(see instructions)
BOOSTER
OUTLET
(for optional
accessories)
FLASH CORD
SOCKET
(when cord is attached
push measure to trigger
flash and measure light)
ISO/ISO 2
(depress while turning
set/change dial to set)
MODE
DEPRESS WHILE
TURNING SET/CHANGE
DIAL FOR:
DAYLIGHT MODE
FLASH W/CORD
AUTO RESET CORDLESS FLASH
1/4” TRIPOD
SOCKET
- - - - - - - - - - ->
1/2 Step Shutter Speeds
Remove battery compartment cover and set DIP Switch 1
(TIME 0.5) to “ON.” Select shutter speed using Set / Change
Dial.
Aperture Priority
Set DIP switch 2 (F. NO.) to “ON”. Select and use Set/
Change Dial to select aperture.
EV Readout
Set DIP switch 3 (EV) to “ON”. Select Ambient mode.
Hold Mode button and turn Set/Change Dial until EV readout
shows. Depress measure button.
Multi Flash Mode
Set DIP switch 4 (MULTI) to “ON” . Select Cord or
Cordless Flash mode. Hold down Mode button and turn
Set/Change Dial until MLT (Multi) shows on display. Measures
and counts up to 9 cumulative flashes.
Exposure Compensation
Depress both ISO and ISO 2 at the same time and turn Set/
Change dial to compensation desired up to +/- 9.9 EV.
Motion Picture
Turn Set/change dial (shutter speed) past 8000 to show f/s
(frames per second). Select desired f/s and depress measure
button. Use EV readout to convert EV to Lux or FC with
reference charts.
PRINTED IN USA
Advanced Features


Produkt Specifikationer

Mærke: Sekonic
Kategori: Lichtmeter
Model: L-508

Har du brug for hjælp?

Hvis du har brug for hjælp til Sekonic L-508 stil et spørgsmål nedenfor, og andre brugere vil svare dig