Sennheiser SET 820 S Manual


Læs nedenfor 📖 manual på dansk for Sennheiser SET 820 S (51 sider) i kategorien Hi-Fi system. Denne guide var nyttig for 38 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/51
Set 820
Bedienungsanleitung
Instruction Manual
Notice d´emploi
Istruzioni per l´uso
Instrucciones para el uso
Gebruiksaanwijzing
Bruksanvisning
Deutsch........................................................................................................3
English ...................................................................................................... 23
Français .................................................................................................... 43
Italiano...................................................................................................... 63
Español ............... ......... 83.............................................................................
Nederlands.............. ............... 103................................................................
Svenska .............. ............................................................................. ....... 123
25
English
Connecting the transmitter (charging unit)
Connecting the transmitter (charging unit)
Connecting the transmitter (charging unit)
Connecting the transmitter (charging unit)Connecting the transmitter (charging unit)
The rear of the transmitter is
fitted with two audio inputs:
A socket (LINE) for connection
to the audio output or the
headphone socket on your TV,
and a microphone socket (MIC).
Plug in one end of the connecting cable to the audio output or the
headphone socket on your TV, and the other end to the LINE socket on the
transmitter.
If your TV set is fitted with a SCART socket, use the supplied adapter.
If your TV does not have a headphone or SCART socket, you can use an
external microphone which is described in the section “Accessories”.
26
English
Only use one of the two audio inputs on the transmitter (MIC or LINE).
Connect the power cable to the POWER socket on the transmitter. Plug the
power supply into a household electrical outlet.
Pull the power supply unit out of the electrical outlet when the unit will not
be used for extended periods of time.
Complete freedom of movement
Complete freedom of movement
Complete freedom of movement
Complete freedom of movementComplete freedom of movement
It is not necessary that the transmitter and
stethoset receiver are in a direct line of
sight, so you can move around freely in the
home or outside in the garden. One
transmitter can be used to transmit to
several receivers on the same frequency.
The transmitter’s range may decrease due
to the surface/composition of walls.
28
English
Using the stethoset receiver
Using the stethoset receiver
Using the stethoset receiver
Using the stethoset receiverUsing the stethoset receiver
When putting the stethoset receiver on,
make sure the operating control is
pointing downwards and the letters are
at the front.
The stethoset receiver automatically
turns on if you pull the earbows apart.
After use, the receiver automatically
turns off.
29
English
Adjusting the volume
Adjusting the volume
Adjusting the volume
Adjusting the volumeAdjusting the volume
Adjust the receiver’s volume with
the operating control.
If you are not using the stethoset
receiver, store it in the transmitter’s
charging compartment so that the
battery can be recharged (see
section “Charging the battery”).
30
English
Changing the transmission channel
Changing the transmission channel
Changing the transmission channel
Changing the transmission channelChanging the transmission channel
To avoid interference caused by the
simultaneous operation of several
transmitters, select a different channel
on each transmitter. Several
switchable transmission channels are
available (CHANNEL).
Due to the required approval two
channels are selectable:
Positions 1 or 3 = channel 1 Position 2 = channel 2
Turning the automatic
Turning the automatic
Turning the automatic
Turning the automatic Turning the automatic compression system on
compression system on
compression system on
compression system oncompression system on
Use the COMP switch (compression) at the rear of the transmitter to turn the
automatic compression system on. This system reproduces soft
passages louder and decreases loud sounds.
Use the MO/ST switch to choose between mono and stereo transmission.
For mono TVs and when using the MKE 800 TV microphone, the switch must
be set to mono (MO).
31
English
Adjusting the receiver channel
Adjusting the receiver channel
Adjusting the receiver channel
Adjusting the receiver channel Adjusting the receiver channel
First turn on the transmitter (see section
“Where to place the transmitter”). Then put
on the stethoset receiver - as soon as the
receiver is put on it automatically tunes
itself to the first strong signal found
(normally the transmitter frequency). If, for
some reason, the selected channel is not the
correct one (e.g. because of interference or
another nearby system), press the TUNE
button at the rear of the receiver until you
can hear the audio signal loud and clear. If
you decide to change the transmitter
channel, the frequency search tuning
must be re-started by pressing the TUNE
button on the receiver again (see section
“Changing the transmission channel”).
32
English
Charging the battery
Charging the battery
Charging the battery
Charging the batteryCharging the battery
Place the receiver into the transmitter’s
charging compartment, with the operating
control at the front. The left LED on the
transmitter must light up.
Charge the battery for 24 hours before you use
it for the first time. The normal charging time
is 4-5 hours. A fully charged battery has an
operating time of approx. 4 hours.
Always store the receiver on the
transmitter to ensure that it is fully charged.
The transmitter automatically switches to trickle charging so that the
battery cannot be overcharged. The receiver can remain in the charging
compartment even when the battery has been fully charged.
33
English
Additional information
Additional information
Additional information
Additional informationAdditional information
The audio transmission technology used with this unit is basically that of a
radio. According to today’s scientific knowledge, the radio waves
emitted by this unit are not harmful to humans or animals.
Varnish or furniture polish may degrade the rubber feet of the transmitter.
Place the transmitter on a nonslip pad to avoid potential staining of
furniture.
Delivery includes a pair of replacement ear pads. If necessary, remove the
old ear pads and slide on the new ones.
Use a soft cloth for cleaning the units. Do not use abrasive cleaners.
34
English
WARNING
WARNING
WARNING
WARNINGWARNING: Volume up? - No!
Volume up? - No!
Volume up? - No!
Volume up? - No!Volume up? - No!
When people use headphones, they tend to choose a higher
volume than with loudspeakers. However, if your hearing has
deteriorated and you need to rely on an assitive listening
system, please avoid listening at high volume levels for a long
time. Please protect your hearing.
35
English
Accessories
Accessories
Accessories
AccessoriesAccessories
Only use original Sennheiser spare parts and accessories.
ATTENTION:
ATTENTION:
ATTENTION:
ATTENTION:ATTENTION: Components from other manufacturers (e.g. for power supply
or battery) may cause damage to the unit and will invalidate
the warranty.
The following accessories are available from your authorized dealer:
Rechargeable battery BA 151
Charger L 151-2
Stethoset receiver RR 820
Clip-on receiver with audio socket RR 820 S
Transmitter TR 820
External microphone MKE 800 TV


Produkt Specifikationer

Mærke: Sennheiser
Kategori: Hi-Fi system
Model: SET 820 S

Har du brug for hjælp?

Hvis du har brug for hjælp til Sennheiser SET 820 S stil et spørgsmål nedenfor, og andre brugere vil svare dig




Hi-Fi system Sennheiser Manualer

Hi-Fi system Manualer

Nyeste Hi-Fi system Manualer