Senseair eSENSE Manual
Senseair
CO2 Sensor
eSENSE
Læs nedenfor 📖 manual på dansk for Senseair eSENSE (4 sider) i kategorien CO2 Sensor. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/4
Installation Manual
eSENSE (Disp)
CO2 sensor
eSENSE
eSENSE Disp
General
The IAQ-sensor product eSENSE
(sensor for wall mounting) is designed to measure carbon dioxide
(CO2) in rooms. Option TR is prepared for temperature measurements by the resistive temperature
probe mounted by the user. The temperature probe is potential free (floating). Option Disp, displays
the measured CO2 value in ppm (parts-per-million) on the LCD.
The units are designed for connecting to Direct Digital Control (DDC) with 0─10V or
2─10V signal inputs. The two parallel signal outputs OUT1 (0─10V) and OUT2 (2─10V or 4─20mA)
give linear signal voltages or currents corresponding to the measuring range.
The output OUT2 also indicates the status by setting the output voltage to 1V or the output current to
2mA when the sensor self-diagnostics detects any error.
Produkt Specifikationer
Mærke: | Senseair |
Kategori: | CO2 Sensor |
Model: | eSENSE |
Har du brug for hjælp?
Hvis du har brug for hjælp til Senseair eSENSE stil et spørgsmål nedenfor, og andre brugere vil svare dig
CO2 Sensor Senseair Manualer
24 August 2024
22 August 2024
21 August 2024
18 August 2024
10 August 2024
9 August 2024
7 August 2024
4 August 2024
3 August 2024
2 August 2024
CO2 Sensor Manualer
- CO2 Sensor Bresser
- CO2 Sensor Aktivia
- CO2 Sensor Zehnder
- CO2 Sensor Orcon
- CO2 Sensor Duco
- CO2 Sensor Sohatech
- CO2 Sensor Atal
- CO2 Sensor TechGrow
- CO2 Sensor EnviSense
- CO2 Sensor Brink Climate
Nyeste CO2 Sensor Manualer
2 September 2024
25 August 2024
25 August 2024
24 August 2024
24 August 2024
24 August 2024
23 August 2024
21 August 2024
18 August 2024
10 August 2024