Sevenoak SK-GH07 Manual
Sevenoak
Kamerastativ
SK-GH07
Læs nedenfor 📖 manual på dansk for Sevenoak SK-GH07 (1 sider) i kategorien Kamerastativ. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
LIMITED ONE-YEAR WARRANTY
Sevenoak provides a limited warranty that this product is free
from defects in materials and workmanship to the original
purchaser under normal use for a period of one (1) year from
the original purchase date or thirty (30) days after replaceme
nt (the “Warranty Period”), whichever occurs later. Our respon
sibility with respect to this limited warranty shall be limited
solely to repair or replacement, at its option, of any product
which fails during normal consumer use.
To obtain warranty coverage during the Warranty period,
contact your place of purchase (”Seller”) to obtain a return
merchandise authorization (”RMA”) number, and return to
Seller the defective product along with proof of purchase and
the RMA number.
● Please read and follow these instructions, and
keep this manual in a safe place.
● Handle the unit with care.
● Clean the unit with a soft, dry cloth.
● Use only parts provided by the manufacturer.
● Make sure everything is secure before proceeding.
● Make sure the item is intact and that there are no
missing parts.
● Do not exceed the maximum load capacity.
● All photos are for illustrative purposes only.
WARNINGS
This warranty does not extend to damage or failure which
results from misuse, neglect, accident, alternation,abuse,
improper installation or maintenance. Except as provided her
ein, sevenoak makes neither any express warranties nor any
implied warranties, including but not limited to any implied
warranty of merchantability or tness for a particular purpose.
This warranty provides you with specic legal rights, and you
may also have additional rights which vary from state to state.
2018 Sevenoak inc.Visit us on the
web at www.sevenoak.biz
2018 Sevenoak inc.Visit us on the
web at www.sevenoak.biz
Upgraded Gimbal Tripod Head
Thank you for purchasing the SEVENOAK SK-GH07 Gimbal head!
If you have any questions that aren’t answered by this manual, please
contact us at www.sevenoak.biz
The SEVENOAK SK-GH07 Gimbal Head can hold up cameras weighing over
10kg (22lb), making it perfect for any photography using large telephoto
lenses. Separate locks control the 360°panning base and swinging arm,
allowing a full range of motion ideal for covering sporting events, catching
birds in flight, or any other fast-moving subjects.
The "gravity-balanced" gimbal head makes even the bulkiest camera and
lens combos seem almost weightless. The Arca-Swiss-compatible quick-
release plate (included) is 120 mm long, providing ample support of most
telephoto lenses. For extreme telephoto lenses, longer base plates can be
easily substituted.
With numbered scales along the vertical arm allow you to easily repeat your
setup for various lens and camera combinations. The panning base and
vertical arm capable of 360-degree rotation (horizontal and vertical).
Additionally, the lens platform can be adjusted up or down by 4" to better
accommodate dierent camera set ups.
1. Tilt Knob 360 °rotating（ ）
2. Pan knob
- The gimbal head can be locked with any direction on the tripod.
- 360 ° rotating when loosen it by clockwise.
3. Swing Arm Knob
4. Quick release plate with 1/4”Thread Screw
5. Quick Release Knob
6. Swing Arm
7. Upright
8. Camera Platform Knob
9. Swing Arm Locking Knob
- This knob made to locking the swing arm in vertical place securely.
- To pull the knob out and tightening it when need to locking
or loosen then swing arm.
10. Friction Control Knob
- Loosen it by clockwise, swing arm rotates smoothly.
- Locking it by anti-clockwise, swing arm rotates slowly.
11. Camera platform
12. Pan base
13. Hard stop
14. 1/4”to 3/8”screw
Material: Aluminium Alloy
Size(L*W*H): 235mm*150mm*268mm
Weight: 1.918kg 4.23lb（ ）
Max load capacity: 10kg (22lb)
Durable aluminum construction
360° Pan & Tilt range gimbal head
Support friction control
Main Body*1 (it was
set-up Before leaving
factory)
Quick Release
plate*1
1/4”to 3/8”
screw*1
Base plate*1
Take the camera mounting plate and slide directly down onto the swing arm.
The platform can only be attached to the gimbal head from directly above
and must be aligned to dovetail with the grooves on the swing arm. Once
the camera platform is correctly positioned, it should easily slide down the
swing arm, and come to a natural stop at the bottom of the arm.
Once the platform has been placed on the swing arm, it can be locked into
place by tightening the camera platform knob. (This knob can be used to
position the camera platform anywhere on the swing arm during use.)
Note: Before mounting your camera on the gimbal, ensure that the pan
knob, tilt knob, and camera mounting platform knob are all tightened. Make
sure that the gimbal feels secure before attempting to mount your camera
on it.
Attach an arca swiss quick release plate to your camera or your own
compatible plate. Which plate you use, be sure that it is long enough to
provide you with the stability you need for your camera and lens.
Open the clamp on the camera mounting platform until it can fit the arca-
swiss plate. While carefully supporting the camera, slide the plate into the
open clamp then tighten it until it holds the plate securely. Gently let go ，
of the camera, to make sure it doesn’t pull the tripod o balance.
Vertical shooting is available
Take the swing arm and camera platform apart, and attach the camera on
quick release plate securely. Mount the camera with quick release plate to
the gimbal head as the picture below.
Note: Make sure that the gimbal feels secure before attempting
to mount your camera on it.
USAGE
After the camera has been set up on the gimbal head, you‘re ready to use it.
Loosen the pan and tilt knobs to the point where you still receive some
resistance, to ensure the head doesn’t move on its own.
The SEVENOAK SK-GH07 mounts to tripods via 1/4”-20 screw thread (also
can be changed into included 3/8”screw thread), located on the bottom of
the unit.
Simply lower the gimbal head onto the tripod mounting screw, and rotate
until it is securely tightened. Be sure to align the screw thread directly over
the mounting screw, to avoid cross-threading during the tightening process.
Note: Be sure to attach the gimbal head to your tripod before attempting
to mounting your camera on it.
SK-GH07 main body
Tripod
1/4”to 3/8”male screw
Attaching the Camera Mounting Plate
Attaching and Balancing your camera
Mounting the Gimbal Head
Introduction
Set Up
Components
Specification
What’s Incuded
松开
快拆板锁紧旋钮
SK-GH07
1
10
13
7
9
2
8
3
6
4
11
12
14
5
Produkt Specifikationer
| Mærke: | Sevenoak |
| Kategori: | Kamerastativ |
| Model: | SK-GH07 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Sevenoak SK-GH07 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Kamerastativ Sevenoak Manualer
19 Juni 2024
19 Juni 2024
19 Juni 2024
18 Juni 2024
18 Juni 2024
18 Juni 2024
18 Juni 2024
Kamerastativ Manualer
- Kamerastativ SilverCrest
- Kamerastativ Sony
- Kamerastativ Braun
- Kamerastativ Easypix
- Kamerastativ Pyle
- Kamerastativ Hama
- Kamerastativ Laserliner
- Kamerastativ Bresser
- Kamerastativ Rollei
- Kamerastativ DJI
- Kamerastativ Swarovski
- Kamerastativ GoPro
- Kamerastativ Celestron
- Kamerastativ Zhiyun
- Kamerastativ Rode
- Kamerastativ Sachtler
- Kamerastativ Arkon
- Kamerastativ Ravelli
- Kamerastativ Freefly
- Kamerastativ Proaim
- Kamerastativ Manfrotto
- Kamerastativ Joby
- Kamerastativ Magnus
- Kamerastativ Neewer
- Kamerastativ Easyrig
- Kamerastativ Miller
- Kamerastativ Sky-Watcher
- Kamerastativ Square Jellyfish
- Kamerastativ SmallRig
- Kamerastativ Robus
- Kamerastativ Sunpak
- Kamerastativ Libec
- Kamerastativ Celly
- Kamerastativ Velbon
- Kamerastativ Stalco
- Kamerastativ Vanguard
- Kamerastativ IOptron
- Kamerastativ E-Image
Nyeste Kamerastativ Manualer
19 Oktober 2024
18 Oktober 2024
24 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024