Sharp LC-32D6U Manual

Sharp televisión LC-32D6U

Læs nedenfor 📖 manual på dansk for Sharp LC-32D6U (62 sider) i kategorien televisión. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/62
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
LC-37D6U
LC-32D6U
LC-26D6U
ENGLISH
ESPAÑOL FRANÇAIS
1
ENGLISH
LIQUID CRYSTAL TELEVISION
ENGLISH
OPERATION MANUAL
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrow-head
symbol, within an equilateral
triangle, is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within a
triangle is intended to alert the user
to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the product.
IMPORTANT:
To aid reporting in case of loss or theft, please record
the TV’s model and serial numbers in the space
provided. The numbers are located at the rear of the
TV.
Model No.:
Serial No.:
• The illustrations and on-screen displays in this operation
manual are for explanation purposes and may vary slightly
from the actual operations.
• Menu items that are not selectable are grayed out.
• The examples used throughout this manual are based on
the LC-32D6U model.
LC-37D6U
LC-32D6U
LC-26D6U
2
IMPORTANT INFORMATION
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly
approved by the manufacturer could void the user’s authority to operate this equipment.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the
National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.”
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these
materials may be regulated due to environmental considerations. For disposal or recycling information, please contact
your local authorities or the Electronic Industries Alliance: www.eia.org
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR
TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS
DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE
RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE
MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING
ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART
COMBINATION SHOULD BE MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND
UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN.
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
DECLARATION OF CONFORMITY
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-37D6U
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-32D6U
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-26D6U
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www. sharpusa. com
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use
shielded cables and connectors for connections.
3
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years
of trouble-free operation of your product, please read the Important Safety Instructions carefully
before using this product.
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,
improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following
instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of
your Liquid Crystal Television, please read the following precautions carefully before using the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
Additional Safety Information
15) Power Sources — This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local
power company. For products intended to operate from battery power, or other sources, refer to the operating
instructions.
16) Overloading — Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17) Object and Liquid Entry — Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the product.
18) Damage Requiring Service — Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment of
other controls may result in damage and will often require extensive work by a qualified technician to
restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance – this indicates a need for service.
19) Replacement Parts — When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20) Safety Check — Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
21) Wall or ceiling mounting — When mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended by the manufacturer.
4
IMPORTANT SAFETY INSTRUCTIONS
• Water and Moisture — Do not use this product near water – for example, near a bath tub,
wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the
like.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the
product on an unstable base can cause the product to fall, resulting in serious personal
injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. When mounting the product on
a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware
recommended by the manufacturer.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do
not cover or block these vents and openings since insufficient ventilation can cause
overheating and/or shorten the life of the product. Do not place the product on a bed, sofa,
rug or other similar surface, since they can block ventilation openings. This product is not
designed for built-in installation; do not place the product in an enclosed place such as a
bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are
followed.
• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when
the product is dropped or applied with impact. Be careful not to be injured by broken glass
pieces in case the panel breaks.
• The Liquid Crystal panel is a very high technology product with 3,147,264 thin film transistors, giving you fine picture
details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note
that this does not affect the performance of your product.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speaker. Be sure to always
carry the TV by two people holding it with two hands—one hand on each side of the Display.
• Heat — The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
• Lightning — For added protection for this television equipment during a lightning
storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna. This will prevent damage to the
equipment due to lightning and power-line surges.
• Power Lines — An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines or circuits as contact
with them might be fatal.
• Selecting the location — Select a place with no direct sunlight and good ventilation.
5
IMPORTANT SAFETY INSTRUCTIONS
• Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC —NATIONAL ELECTRICAL CODE
• To prevent fire, never place any type of candle or flames on the top or near the TV
set.
• To prevent fire or shock hazard, do not expose this product to dripping or splashing.
No objects filled with liquids, such as vases, should be placed on the product.
• To prevent fire or shock hazard, do not place the AC power cord under the TV set
or other heavy items.
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Use a soft cloth and gently wipe the surface of the TV panel. Using a hard cloth
may scratch the panel surface.
• Use a soft damp cloth to gently wipe the panel when it is really dirty.
(It may scratch the panel surface when wiped strongly.)
• If the panel is dusty, use an anti-static brush, which is commercially available, to
clean it.
• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to
clean it, such materials may damage the panel surface.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
6
QUICK REFERENCE
STOP! To safely remove the AQUOS television from the box
It’s best to use 2 people to remove the AQUOS television for stability.
1. Use the cardboard holders on either side of the AQUOS television to remove it
from the box.
2. Remove the cardboard; however, keep the wrapping on the AQUOS television to
protect it while moving.
3. Lift onto installation location as the diagram illustrates.
Ventilation & Cleaning Tips
Keep your AQUOS television in a well ventilated area and make sure not to place it by a
heat source or use near water. The AQUOS television is designed for AC use only and
should be used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently
wipe and avoid pressing on the screen. To clean the outer cabinet, use the same
method. Do not use liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
QUICK INSTALLATION TIPS
1. Facing the back of the AQUOS television, remove
the terminal cover.
Press down the
upper hooks to
remove the cover
toward you.
2. Attach your antenna to the back of the TV. (See
page 13.)
3. Connect the AC plug for the AQUOS television
into the wall outlet.
5. How to turn on the AQUOS television for the first
time.
A) Press POWER on AQUOS television.
POWER
B) POWER indicator on the front of the AQUOS
television lights blue.
CAUTION
•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES WITH
THE AC CORD CONNECTED.
4. Place the Ferrite core in the space indicated in
the below figure and bundle the cords properly
with a cable clamp and cable tie.
NOTE
• The TV can be swiveled 25 degrees (26 inch model) or
10 degrees (32 and 37 inch model) right and left with TV
stand attached.
• You cannot tilt the screen vertically.
POWER indicator
7
QUICK REFERENCE
IMPORTANT:
The POWER indicator on the AQUOS television should light blue indicating you have power to the AQUOS
television.
If the POWER indicator on the AQUOS television still does not light up, press TV POWER
on the remote control to turn the power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT
THE INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
Please refer to the BASIC ADJUSTMENT SETTINGS SECTION for EZ setup and basic channel setup functions
and USING EXTERNAL EQUIPMENT SECTION for other device connections (DVD, VCR, AUDIO, etc) in your
AQUOS operation manual.
1Open the battery cover. 2Insert two “AAA” size batteries
(supplied with the product).
• Place the batteries with their terminals
corresponding to the ( ) and (e f)
indications in the battery compartment.
3Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause
chemical leakage in old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with
skin can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.
If the remote control fails to operate TV functions, replace the batteries in the remote control unit.
30°30°Remote control sensor
23⬘ (7 m)
8
Contents
IMPORTANT INFORMATION ……………………… 1
DEAR SHARP CUSTOMER ………………………… 3
IMPORTANT SAFETY INSTRUCTIONS …………… 3
QUICK REFERENCE ………………………………… 6
Contents ……………………………………………… 8
COPYRIGHT AND LICENSE NOTICE …………… 8
Supplied accessories ……………………………… 9
Trademarks …………………………………………… 9
Part names ………………………………………… 10
TV (Front) ……………………………………… 10
TV (Rear) ……………………………………… 11
Remote control unit …………………………… 12
Preparation ………………………………………… 13
Using the remote control unit ………………… 13
Cautions regarding remote control unit … 13
Antennas ……………………………………… 13
Watching TV ……………………………………… 14
Turning on the power ………………………… 14
Turning off the power ………………………… 14
Initial setup ……………………………………… 15
Changing channels-Air/Cable ……………… 16
Changing volume/sound ……………………… 17
Setting MTS/SAP stereo mode ……………… 18
Setting Digital broadcasting audio mode …… 18
Connecting Digital Cable Module …………… 19
Basic adjustment settings ……………………… 20
Menu items ……………………………………… 20
EZ setup ………………………………………… 21
Channel Setup ………………………………… 21
Antenna Setup – DIGITAL …………………… 22
Standby Mode ………………………………… 24
Favorite channel setting ……………………… 24
Language setting ……………………………… 24
Picture adjustments …………………………… 25
OPC setting ………………………………… 25
Advanced picture adjustments ………… 26
Color temperature ………………………… 26
Black ……………………………………… 26
3D-Y/C ……………………………………… 26
Monochrome ……………………………… 26
Film Mode (3:2 pull-down) ……………… 26
Sound adjustment ……………………………… 27
Surround ………………………………………… 27
Power Control ………………………………… 28
Digital Setup …………………………………… 28
Audio Setup ……………………………… 28
Using external equipment ……………………… 29
Displaying an external equipment image …… 29
Connecting a DVD player or a Digital TV STB
(Air or Cable) ……………………………… 30
Connecting a VCR, game console
or camcorder ……………………………… 30
Using Digital Audio Output …………………… 30
Connecting HDMI equipment ………………… 31
Displaying an image from HDMI
equipment ………………………………… 31
Useful adjustment settings ……………………… 32
Image position ………………………………… 32
Moving the picture on the screen …………… 32
Input Select …………………………………… 33
Input Label ……………………………………… 34
Picture Flip ……………………………………… 34
AV MODE ……………………………………… 35
View mode for 4:3 Programs ………………… 35
View mode for HD Programs ………………… 35
Digital Noise Reduction ……………………… 36
Audio Only ……………………………………… 36
Output Select …………………………………… 36
Quick Shoot …………………………………… 36
Color System …………………………………… 37
Sleep Timer …………………………………… 37
Program Title Display ………………………… 37
Closed Captions and Digital Closed
Captions …………………………………… 38
Caption Setup ………………………………… 39
Secret number setting for parental control … 40
Parental control (setting V-CHIP level) ……… 42
How to temporarily release
the V-CHIP BLOCK ……………………… 45
Reactivating the temporarily released
V-CHIP BLOCK …………………………… 45
Other viewing options …………………………… 46
Viewing a list of channels ……………………… 46
Viewing information of the program ………… 46
Freezing images ……………………………… 47
Presetting remote control function …………… 47
Appendix ………………………………………… 51
Removing speakers …………………………… 51
Removing the stand …………………………… 52
Setting the TV on the wall …………………… 52
Troubleshooting ………………………………… 53
Troubleshooting-Digital broadcasting ……… 53
RS-232C port specifications ………………… 54
Specifications ………………………………… 56
Dimensional drawings …………………………… 57
COPYRIGHT AND LICENSE NOTICE
• It is the intent of Sharp that this product be used in full compliance with the copyright laws of the United States and that
prior permission be obtained from copyright owners whenever necessary.
• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is
prohibited. U. S. Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; 5,315,448; 6,381,747; and 6,516,132.
• This digital television is capable of receiving analog basic, digital basic and digital premium cable television programming
by direct connection to a cable system providing such programming. A security card provided by your cable operator is
required to view encrypted digital programming. Certain advanced and interactive digital cable services such as video-
on-demand, a cable operator’s enhanced program guide and data-enhanced television services may require the use of
a set-top box. For more information call your local cable operator.
9
Supplied accessories
Make sure the following accessories are provided with the product.
NOTE
• Always use the AC cord supplied with the LCD-TV.
Remote control unit (g1)
Page 7
“AAA” size battery (g2)
Page 7 Page 6
AC cord (g1)
Cable clamp (g1)
Page 6
Cable tie (g1)
Page 6
Operation manual (g1)
Trademarks
•Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP5510752 and 5736897. BBE and BBE symbol are registered trademarks of
BBE Sound, Inc.
•BBE Mach3Bass extends the bass response of a given loudspeaker and provides deep, tight and musically accurate
bass frequencies.
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
• ™CableCARD is a trademark of Cable Television Laboratories, Inc.
• “ ”Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
10
Part names
POWER indicatorOPC sensor
TV (Front)
POWER button
INPUT button
Volume buttons (VOLl/k )Channel
buttons
(CHs r/ )
Remote control sensor
*OPC: Optical Picture Control
(See page 25.)
*DL: DownLoad
OPC/DL indicator
NOTE
• See page 14 for status indicator.
11
Part names
TV (Rear)
*Press RESET if the TV cannot return to its original state after performing various operations.
• AV MODE resets to DYNAMIC (Fixed)
• TV channel returns to initial channel (Air:2ch, Cable:1 or 2ch)
• Audio setting initializes
• Surround resets to off
• Image position initializes
** Press SYSTEM RESET if the TV does not operate after starting up.
NOTE
• Pressing RESET will not work if the TV is in standby mode.
• Pressing RESET will not delete channel preset or secret number. See page 41 for clearing the secret number when you
know it. See page 58 for initializing to the factory preset values when you forget your secret number.
RESET*
INPUT 3
terminals
SYSTEM RESET**
ANALOG IN
terminal
AC INPUT terminal
RS-232C
terminal
INPUT 2
terminals
INPUT 1
terminals
INPUT 4 terminals
MONITOR OUTPUT terminals
CableCARD™ slot
DIGITAL AUDIO
OUTPUT terminal
DIGITAL AIR IN
terminal
DIGITAL CABLE
IN terminal
12
Part names
Remote control unit
2
3 17
18
19
20
21
22
23
24
25
26
27
28
29
30
1 16
4
5
6
7
8
9
11
12
13
14
15
10
1 TV POWER: Switches the Liquid Crystal Television
power on or enters Standby mode. (See page 14.)
2 DISPLAY: Displays the channel information.
3 SOURCE POWER: Turns the power of the external
equipment on and off.
4 External equipment operational buttons: Operates
the external equipment.
5 0 – 9/• (DOT): Sets the channel. (See page 16.)
6 AIR: Receives air signal.
7 CABLE: Receives cable signal.
8 VOL kkkk
k/llll
l: Sets the volume. (See page 17.)
9 SURROUND: Selects Surround settings. (See page 17.)
10 INFO: Displays the program information screen. (See
page 46.)
11 FREEZE: Sets the still image. Press again to return to
normal screen. (See page 47.)
12 EXIT: Turns off the menu screen.
13 FAVORITE CH
A B, , C, D: Selects four preset favorite channels in four
different categories. (See page 24 for details.)
While watching, you can toggle the selected channels
by pressing A, B, C and D.
14 AUDIO: Selects the MTS/SAP or the audio mode during
multi-channel audio broadcasts. (See page 18.)
15 SLEEP: Sets the sleep timer. (See page 37.)
16 FUNCTION: Switches the remote control for TV, CBL/
SAT, VCR, DVD and AUDIO operation. Indicator lights
up for the current mode. (See pages 47 to 50 for details.)
* To enter the code registration mode, you need to press
FUNCTION DISPLAY and at the same time.
17 LIGHT : When pressed all buttons on the remote
control unit will light. The lighting will turn off if no
operations are performed within about 5 seconds. This
button is used for performing operations in low-light
situations.
18 VIEW MODE: Selects the screen size. (See page 35.)
19 ENT: Enters a channel selection when choosing with
the 0-9 buttons.
20 FLASHBACK: Retur ns to the previous channel or
external input mode. (See page 16.)
21 INPUT: Selects a Liquid Crystal Television input source.
(TV, INPUT 1, INPUT 2, INPUT 3, INPUT 4) (See pages
29 and 33.)
22 CH rr
rr
r/ss
ss
s: Selects the channel. (See page 16.)
23 MUTE: Mutes the sound. (See page 17.)
24 CH LIST: Displays the channel list screen.
25 MENU: Displays the menu screen.
26 a b c d/ / / /ENTER: Selects a desired item on the
screen.
27 RETURN: Returns to the previous menu screen.
28 FAVORITE: Registers favorite channel. (See page 24.)
29 CC: Displays captions when receiving closed-caption
signals. (See page 38.)
30 AV MODE: Selects an audio or video setting.
(STANDARD, MOVIE, GAME, USER, DYNAMIC
(Fixed), DYNAMIC) (See page 35.)
13
Preparation
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor on
the TV. Objects between the remote control unit and the remote control sensor
may prevent proper operation.
Cautions regarding remote control unit
• Do not expose the remote control unit to shock. In addition, do not expose the
remote control unit to liquids, and do not place in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
The heat may cause deformation of the remote control unit.
• The remote control unit may not work properly if the remote control sensor on
the TV is under direct sunlight or strong lighting. In such cases, change the
angle of the lighting or the TV, or operate the remote control unit closer to the
remote control sensor.
300-ohm twin-lead (flat)
300-ohm twin-lead
75-ohm coaxial cable (round)
75-ohm coaxial cable
Cable TV lead-In
or
IN OUT
300-ohm
twin-lead
VHF
ANTENNA
UHF
ANTENNA
Combiner
(commercially
available)
or
Home Antenna
terminal (75-ohm)
300/75-ohm adapter
(commercially available)
Coaxial cable
(commercially
available)
signal splitter
(commercially
available)
Cable without a CATV
converter
Combination
VHF/UHF antenna
Separate VHF/UHF
antenna
Connecting Antenna Cable
1. A 75-ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal without
tools (Commercially available).
2. A 300-ohm system is a flat “twin-lead” cable that can be
attached to a 75-ohm terminal through a 300/75-ohm
adapter (Commercially available).
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
F-type connector
75-ohm coaxial cable
When connecting the RF cable to the TV set, do not tighten
F-type connector with tools.
If tools are used, it may cause damage to your TV set.
(The breaking of internal circuit, etc.)
F-type connector should be finger-tightened only.
NOTICE
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,
plug it into the antenna terminal at the rear of the TV set.
Depending on your reception
environment, either CABLE IN or
AIR IN may be used, or both
CABLE IN and AIR IN may be used.
14
“Off” is selected in OPC setting
“On” or “On: Display” is selected in OPC setting
CableCARD security module is downloading data
Watching TV
Simple operations for watching a TV program Turning on the power
TV status indicator (POWER)
POWER indicator
Press POWER on the TV or press TV POWER on the remote
control.
• POWER indicator (Blue): The TV is on. (After a few seconds, a window
appears with sound.)
NOTE
• The initial setup starts when the TV powers on for the first time. If the TV
has been turned on before, the EZ setup will not be invoked. See page
21 for performing EZ setup from the Setup menu.
Turning off the power
Press POWER on the TV or press TV POWER on the remote
control.
• The TV enters standby mode and the image on the screen disappears.
• The POWER indicator on the TV gradually turns off.
NOTE
• If you are not going to use this TV for a long period of time, be sure to
remove the AC cord from the power outlet.
CAUTION
• Please do not unplug the AC cord when the OPC/DL indicator
is red.
TV POWER
Lights off
Lighting (Green)
Lighting (Red)
ON
OFF/Standby
Lighting (Blue)
Lights off
TV status indicator (OPC/DL)
*OPC: Optical Picture Control
*DL: DownLoad
POWER
OPC/DL indicator
16
Watching TV
Changing channels-Air/Cable
You can change channels in several ways by pressing
AIR CABLE or to select the antenna and then following
one of the methods below .
Method 1
Using CHr s/ on the remote control unit or on the TV.
Method 2
1. Press FLASHBACK to switch to the previously tuned
channel.
2. Press FLASHBACK again to switch back to the
currently tuned channel.
NOTE
•FLASHBACK will not work if no channel has been
changed after TV is turned on.
Method 3
Using remote control buttons 0–9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL.
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press 5s ENT
NOTE
• When selecting a 1-digit channel number, it is not
necessary to press before the number.0
• When you enter only, channel selection will be made0 9–
if there is no operation for a few seconds.
To select a 3-digit channel number
(e. g., Channel 115):
Press 1s s1 5
NOTE
• When you enter only, channel selection will be made0 9–
if there is no operation for a few seconds.
• If you push “0” by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter and • (DOT), channel selection will0 9–
be made if there is no operation for a few seconds.
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2 s s s s2• (DOT) 1 ENT
5
Air
5
Air ANALOG
11
Cable
1
Cable
115
Cable ANALOG
22.
Air Air DIGITAL
22. 1
22. 1
Air
22
Air
2
Air
18
Watching TV
NOTE
• MTS only operates while in TV mode.
You can change MTS as
shown below to match
the television broadcast
signal.
STEREOkSAP mode MONO mode
Examples: when receiving MTS and SAP
STEREO mode MAINkSAP mode
Setting MTS/SAP stereo mode
The TV has a feature that allows reception of sound
other than the main audio for the program. This feature
is called Multi-channel Television Sound (MTS). The
TV with MTS can receive mono sound, stereo sound
and Secondary Audio Programs (SAP). The SAP
feature allows a TV station to broadcast other
information, which could be audio in another language
or something completely different like weather
information.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
•Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
•SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to second language, supplementary
commentary and other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
2
Air ANALOG
Audio : MONO
2
Air ANALOG
Audio : ST(SAP)
2
Air ANALOG
Audio : SAP(ST)
2
Air ANALOG
Audio : MONO
2
Air ANALOG
Audio : MONO
2
Air ANALOG
Audio : STEREO
2
Air ANALOG
Audio : MAIN
2
Air ANALOG
Audio : SAP
Setting Digital broadcasting audio
mode
The types of audio transmitted in a digital broadcast
include SURROUND as well as MONO and STEREO.
In addition, it is possible for multiple audio tracks to
accompany a single video track.
Press AUDIO to toggle
between audio modes.
Examples: when receiving Digital broadcasting
2.2
Air DIGITAL
Audio3 :
SURROUND
2.2
Air DIGITAL
Audio1 : STEREO
2.2
Air DIGITAL
Audio2 : STEREO
19
Watching TV
2
Press c d/ to select “Digital Setup”, a b/ to
select “CableCARD Menu”, to selecta b/
“Pairing Information”, and then press ENTER.
3
Press MENU and the MENU screen displays.
1
A message will appear on the screen. Call
the number on the screen and tell the
operator the CableCARD security module ID
and Host ID numbers displayed on the
screen.
Pairing Information
Diagnostic Screen
ECM
Conditional Access
CableCARD Dialog
CableCARD(tm) Pairing Status
In order to start cable service
for this device, please contact
your cable provider
1-888-555-2222
CableCARD(tm) ID:
7-561-034-449-009
Host ID:
0-100-331-784-018
• If there is a white triangle at the right side of
the screen, the screen is not showing the entire
message. Press on your remote controla b/
to display the rest of the message.
• When there is a “LINK” button on the screen,
there is a link to the next page. Press ENTER
to go to the next page.
•
The words “Pairing Information” may be replaced
by a different expression depending on the
manufacturer of the CableCARD security module.
1Turn on the power of the TV.
2Check that the CableCARD security module upgrade
screen is not displayed. If it is displayed, wait until it
disappears.
3Remove the CableCARD security module.
Removing CableCARD security module
Disconnecting the cable antenna
1Turn on the power of the TV.
2Check that the CableCARD security module upgrade
screen is not displayed. If it is displayed, wait until it
disappears.
3Disconnect the cable antenna.
■If the above procedure does not work,
please follow the following steps instead.
CableCARD(tm)
Diagnostic Information
Power: ON
In band: O.K.
Out of band: O.K.
Video: O.K.
Audio: O.K.
LINK
Connecting Digital Cable Module
Digital Cable Module is called CableCARD™. By
attaching the CableCARD security module, you can
receive various digital services provided by your Cable
Company. To obtain and use a CableCARD security
module you need to first submit an application.
Please contact your cable company to discuss
receiving an application.
Connect the antenna cables to both ANALOG
IN and DIGITAL CABLE IN terminals.
NOTE
• Do not insert any PCMCIA card other than CableCARD
security module into the CableCARD slot.
• Please do not pull the AC cord out while the CableCARD
security module is inserted.
• After inserting the CableCARD security module, it may
take several minutes before video output from the selected
channel appears on screen.
Turn on the power of the TV.
■When you change your address (See page 50.)
■About EAS (Emergency Alert System) (See page 50.)
NOTE
• If your cable company does not have CableCARD security
module available, you must connect to the cable-TV set-
top box via component video in order to receive HDTV
programs. (See page 30.)
NOTE
• Use a signal splitter (commercially available) for this type
of connection. (See page 13.)
Insert the CableCARD security module (lower
side facing right) into the CableCARD slot.
• When the CableCARD security module is
inserted, a message appears, asking you to
confirm the cable connections.
Press RETURN to cancel the message, or wait
until the screen in step 4 appears.
A message will appear on the screen. (It
might take a couple of minutes before the
message appears.) Call the number on the
screen and tell the operator the CableCARD
security module ID and Host ID numbers
displayed on the screen.
2
1
3
4
CableCARD(tm) Pairing Status
In order to start cable service
for this device, please contact
your cable provider
1-888-555-2222
CableCARD™ ID:
7-561-034-449-009
Host ID:
0-100-331-784-018
20
Basic adjustment settings
Menu items
List of menu items to help you with operations
OPC ................................................ Page 25
Backlight ........................................ Page 25
Contrast ......................................... Page 25
Brightness ..................................... Page 25
Color ............................................... Page 25
Tint ................................................. Page 25
Sharpness ...................................... Page 25
Advanced
Color Temp. ......................... Page 26
Black .................................... Page 26
3D-Y/C .................................. Page 26
Monochrome ....................... Page 26
Film Mode ............................ Page 26
Picture
No Signal Off ................................. Page 28
No Operation Off ........................... Page 28
EZ Setup ........................................ Page 21
CH Setup ................................ Pages 21, 22
Antenna Setup-DIGITAL ............... Page 22
Input Label ..................................... Page 34
Parental CTRL ........................ Pages 42-45
Position .......................................... Page 32
Picture Flip .................................... Page 34
Standby Mode ............................... Page 24
Language ....................................... Page 24
Treble .............................................. Page 27
Bass ............................................... Page 27
Balance .......................................... Page 27
Surround ........................................ Page 27
Audio Only ..................................... Page 36
Digital Noise Reduction ............... Page 36
HDMI Setup .................................... Page 31
Input Select.................................... Page 33
Output Select................................. Page 36
Quick Shoot ................................... Page 36
Caption Setup................................ Page 39
Program Title Display ................... Page 37
Color System ................................. Page 37
Audio
Power Control
Setup
Option
CableCARD Menu ......................... Page 19
Audio Setup ................................... Page 28
Digital Setup
21
Basic adjustment settings
EZ Setup
You can run EZ Setup again, even after setting up the
preset channels.
Language setting
Select from among 3 languages: English, French and
Spanish.
Press MENU and the MENU screen displays.
Press c d/ to select “Setup”.
1
2
Press a b/ to select “EZ Setup”, and then
press ENTER.
• If you already set the Secret No., go to step 4. If
not, skip to step 5.
Input the 4-digit secret number by using – 0 9.
3
4
5
Press a b/ to select the desired language
listed on the screen, and then press ENTER.
Antenna setting
Make sure what kind of connection is made with your
TV when selecting “Air” or “Cable” for ANALOG and
DIGITAL (Cable).
6
7
Press c d/ to select “Air”, “Cable”, for
ANALOG, then press b to move down.
Press c d/ to select “Standard”, “HRC”,
“IRC” for DIGITAL (Cable).
Press ENTER to enter the setting.
• There are 3 kinds of CATV system, including
Standard, HRC and IRC. Select the one matches
to your TV.
NOTE
• If no channel is found, make sure what kind of connection is
made with your TV and try EZ Setup again.
• Make sure what kind of connection is made with your TV.
Press c d/ to select “Yes” for ANALOG, then
press b to move down.
Press c d/ to select “Yes” for DIGITAL (Air),
then press to move down.b
Press c d/ to select “Yes” for DIGITAL
(Cable), and press to move down.b
Select “Search Start”, and then press
ENTER.
• This operation makes the TV search for both
ANALOG, DIGITAL (Air) and DIGITAL (Cable)
channels.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
Channel Setup
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Press MENU and the MENU screen displays.
Press c d/ to select “Setup”.
Press a b/ to select “CH Setup”, and then
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 40 for
setting a secret number.
Antenna setting
Press c d/ to select “Air”, “Cable”, for
ANALOG, then press b to move down.
Press c d/ to select, “Standard”, “HRC”,
“IRC” for DIGITAL (Cable).
Press ENTER to enter the setting.
Press a b/ to select “Air/Cable”, and then
press ENTER.
NOTE
• Make sure what kind of connection is made with your TV.
• There are 3 kinds of CATV system, including Standard,
HRC and IRC. Select the one matches to your TV.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
Press MENU and the MENU screen displays.
Press c d/ to select “Setup”.
Press a b/ to select “CH Search”, and then
press ENTER.
Press c d/ to select “Yes” for ANALOG, then
press b to move down.
Press c d/ to select “Yes” for DIGITAL (Air),
then press to move down.b
Press c d/ to select “Yes” for DIGITAL
(Cable), and press to move down.b
Select “Search Start”, and then press
ENTER.
NOTE
• Make sure what kind of connection is made with your TV.
Press a b/ to select “CH Setup”, and then
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 40 for
setting a secret number.
1
2
3
5
4
1
2
3
4
5
22
Basic adjustment settings
Channel memory setting
Press MENU and the MENU screen displays.
Press c d/ to select “Setup”.
1
2
3
4
Press a b/ to select “CH Setup”, and then
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 40 for
setting a secret number.
Press a b/ to select ANALOG, DIGITAL (Air),
DIGITAL (Cable) and CableCARD, and then
press ENTER.
5
6
Press a b/ to select “CH Memory”, and then
press ENTER.
Perform the following steps after confirming
the type of antenna connection made with
your TV, and the channel type selected in
Step 5.
When viewing ANALOG broadcasts:
1 a b c dPress / , and then press / to select
the channel to skip or not.
2 a bPress / to select “Skip”, and then press
c d/ to select “On” or “Off”.
When viewing DIGITAL broadcasts:
1 a bPress / to select the channel to skip or
not, and then press to select “On” orc d/
“Off”.
• On: Skips channels. (Channel selection disabled using
CHrr
rr
r/ss
ss
s.)
• Off: Does not skip channels. (Channel selection enabled
using CHrrrr
r/ssss
s.)
NOTE
• Make sure what kind of connection is made with your TV.
Antenna Setup – DIGITAL
In order to receive digital air broadcasts, you need a
digital broadcast antenna. You can confirm the antenna
configuration through the “Antenna Setup - DIGITAL”
screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Press MENU and the MENU screen displays.
Press c d/ to select “Setup”.
Press a b/ to select “Antenna Setup -
DIGITAL”, and then press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 40 for
setting a secret number.
Press a b/ to select “Signal Strength”.
• The signal strength of the DIGITAL (Air) antenna
is displayed. The signal information is based
on the current channel.
Signal Strength
Press a b/ to select “Channel Strength”, and
then press ENTER.
Input the 2-digit channel number to check
the signal strength of the selected channel.
• Make sure the appropriate signal strength of
each channel received is obtained.
Channel Strength
• The channel signal strength can also be checked
separately.
Repeat steps 1 to 3 in Signal Strength in
Antenna Setup - DIGITAL.
NOTE
• This function is available for DIGITAL (Air) only.
1
2
4
Signal Strength
Channel Strength
Cable Reception
Signal Strength
Current Max0 0
2
3
1
Signal Strength
Current
CH
Max0
1 2
0
Signal Strength
Channel Strength
Cable Reception
3
23
Basic adjustment settings
Press MENU and the MENU screen displays.
Press c d/ to select “Setup”.
Press a b/ to select “Antenna Setup -
DIGITAL”, and then press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 40 for
setting a secret number.
1
2
4
3
Cable Reception
• This menu provides useful technical information for when
the CableCARD security module is installed by cable
service personnel. The following information may vary
depending on your cable service provider.
Press a b/ to select “Cable Reception”.
• Technical information displays.
FAT (Forward Applications Transport) information:
• FAT denotes a TV program channel that your digital cable
service provides. Digital cable reception information such
as signal lock status and frequency is provided.
Status: When the TV is tuned to a program channel, it shows
“LOCK”. Otherwise “UNLOCK” is displayed.
Modulation: Shows modulation system of the digital cable service
either in 64QAM or in 256QAM.
Frequency: Shows the signal frequency.
Strength: Shows the strength of the reception signal. The
strength value varies from 0 to 99. To enjoy a clear
picture without noise, the value should exceed 60.
FDC (Forward Data Channel) information:
• FDC denotes a data channel for CableCARD security
module operation. When the CableCARD security module
is inserted, data channel reception information such as
signal lock status and frequency is displayed.
Status: When the TV is tuned to a data channel, it shows
“LOCK”. Otherwise “UNLOCK” is displayed.
Rate: Shows the data channel transmission rate.
Frequency: Shows the data channel frequency.
Strength: Shows the strength of the reception signal. The
strength value varies from 0 to 99. To ensure stable
operation, the value should exceed 60.
24
Basic adjustment settings
Favorite channel setting
This function allows you to program 4 favorite channels,
in 4 different categories. By setting the favorite
channels in advance, you can select your favorite
channels easily.
Press FAVORITE.
Press a b/ to select “Register”, and then
press ENTER.
2
3
Press a b c d/ / / to select the position in the
area, and then press to register.ENTER
ANALOG
3
ABCD
Select the channel you want to register as a
favorite channel.
1
4
Press FAVORITE and the favorite channel
screen displays.
Press a b/ to select “1 Data Clear”, and then
press ENTER.
1
Deleting favorite channel
Press a b c d/ / / to select the channel you
want to delete, and then press ENTER.
3
ANALOG
3
ANALOG
18
D-Air
10.1
A B C D
ANALOG
3
ABCD
D-Air
10.1
Yes No
NOTE
• You can delete all the favorite channels by selecting “All
Data Clear” in step 2 in Deleting favorite channel.
Press c d/ to select “Yes”, and then press
ENTER.
Language setting
You can also select a language from the Setup menu.
Select from among 3 languages: English, French and
Spanish.
Press MENU and the MENU screen displays.
Press c d/ to select “Setup”.
Press a b/ to select “Language”, and then
press ENTER.
Press a b/ to select the desired language
listed on the screen, and then press ENTER.
4
3
1
2
4
2
Standby Mode
Standby Mode may be set to either start the TV quickly
from standby or conserve energy while on standby.
1
2
3
Press MENU and the MENU screen displays.
Press c d/ to select “Setup”.
Press a b/ to select “Standby Mode”, and
then press ENTER.
4
Press a b/ to select “Mode1” or “Mode2”,
and then press ENTER.
Selected item Description
Mode1
Mode2
Starting TV is quick from standby.
Power consumption is small at the
standby.

Produkt Specifikationer

Mærke: Sharp
Kategori: televisión
Model: LC-32D6U

Har du brug for hjælp?

Hvis du har brug for hjælp til Sharp LC-32D6U stil et spørgsmål nedenfor, og andre brugere vil svare dig


televisión Sharp Manualer

Sharp

Sharp 32CF4E Manual

13 Januar 2025
Sharp

Sharp 32CF5E Manual

13 Januar 2025
Sharp

Sharp 40BJ5E Manual

13 Januar 2025
Sharp

Sharp 40CF3E Manual

12 Januar 2025
Sharp

Sharp 42EE7E Manual

12 Januar 2025
Sharp

Sharp 55EQ3KA Manual

11 Januar 2025
Sharp

Sharp LC-32LX705 Manual

11 Januar 2025
Sharp

Sharp Aquos 45US40 Manual

29 December 2024
Sharp

Sharp LC70LE741E Manual

15 Oktober 2024
Sharp

Sharp LC-37D7U Manual

13 Oktober 2024

televisión Manualer

Nyeste televisión Manualer

Thomson

Thomson 40FA2S13 Manual

20 Februar 2025
Continental Edison

Continental Edison CELED65SVQLD25B6 Manual

19 Februar 2025
Continental Edison

Continental Edison CELED32SVHD25B6 Manual

19 Februar 2025
TCL

TCL 55P8K Manual

10 Februar 2025
Thomson

Thomson 32FG2S14 Manual

5 Februar 2025
TCL

TCL 85C75B Manual

30 Januar 2025
Samsung

Samsung 75DU7100 Manual

30 Januar 2025
Philips

Philips 32HFL2889T Manual

15 Januar 2025
Philips

Philips 25CE6270 Manual

15 Januar 2025
Grundig

Grundig st 84 899 dolby Manual

15 Januar 2025