Shimano BB-UN26 Manual


Læs nedenfor 📖 manual på dansk for Shimano BB-UN26 (1 sider) i kategorien Cykeltilbehør. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Install using the special tool TL-UN74-S / TL-UN66.
First install the main body, then the adapter.
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
Please note: specifications are subject to change for improvement without notice. (English)
© Sep. 2008 by Shimano Inc. XBC SZK Printed in Singapore.
General Safety Information
WARNING
Obtain and read the service instructions carefully prior to installing the
parts. Loose, worn or damaged parts may cause the bicycle to fall over
and serious injury may occur as a result. We strongly recommend only
using genuine Shimano replacement parts.
• Read these Technical Service Instructions carefully, and keep them in a
safe place for later reference.
Note
• In addition, if pedaling performance does not feel normal, check this once
more.
• Before riding the bicycle, check that there is no play or looseness in the
connection. Also, be sure to retighten the crank arms and pedals at
periodic intervals.
• Do not wash the bottom bracket with high-pressure jets of water.
• If you feel any looseness in the bottom bracket axle, the bottom bracket
should be replaced.
• Be sure to read the service instructions for the Front Drive System in
conjunction with these service instructions.
• Parts are not guaranteed against natural wear or deterioration resulting
from normal use.
• For maximum performance we highly recommend Shimano lubricants and
maintenance products.
• For any questions regarding methods of installation, adjustment,
maintenance or operation, please contact a professional bicycle dealer.
Technical Service Instructions SI-0078A-001
Bottom bracket
Main body
Adapter
Installation
Adapter / bottom bracket tightening torque:
50 - 70 N·m {435 - 608 in. lbs.}
Thread dimensions BC 1.37" X 24 T.P.I. (68, 73 mm)
M36 (70 mm)
Aluminum or steel
Plastic
SI-0078A-001-00


Produkt Specifikationer

Mærke: Shimano
Kategori: Cykeltilbehør
Model: BB-UN26

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano BB-UN26 stil et spørgsmål nedenfor, og andre brugere vil svare dig