Shimano BB-UN26-K Manual
Shimano
Cykeltilbehør
BB-UN26-K
Læs nedenfor 📖 manual på dansk for Shimano BB-UN26-K (1 sider) i kategorien Cykeltilbehør. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
Install using the special tool TL-UN74-S / TL-UN66.
First install the main body, then the adapter.
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
Please note: specifications are subject to change for improvement without notice. (English)
© Sep. 2008 by Shimano Inc. XBC SZK Printed in Singapore.
General Safety Information
WARNING
• Obtain and read the service instructions carefully prior to installing the
parts. Loose, worn or damaged parts may cause the bicycle to fall over
and serious injury may occur as a result. We strongly recommend only
using genuine Shimano replacement parts.
• Read these Technical Service Instructions carefully, and keep them in a
safe place for later reference.
Note
• In addition, if pedaling performance does not feel normal, check this once
more.
• Before riding the bicycle, check that there is no play or looseness in the
connection. Also, be sure to retighten the crank arms and pedals at
periodic intervals.
• Do not wash the bottom bracket with high-pressure jets of water.
• If you feel any looseness in the bottom bracket axle, the bottom bracket
should be replaced.
• Be sure to read the service instructions for the Front Drive System in
conjunction with these service instructions.
• Parts are not guaranteed against natural wear or deterioration resulting
from normal use.
• For maximum performance we highly recommend Shimano lubricants and
maintenance products.
• For any questions regarding methods of installation, adjustment,
maintenance or operation, please contact a professional bicycle dealer.
Technical Service Instructions SI-0078A-001
Bottom bracket
Main body
Adapter
Installation
Adapter / bottom bracket tightening torque:
50 - 70 N·m {435 - 608 in. lbs.}
Thread dimensions BC 1.37" X 24 T.P.I. (68, 73 mm)
M36 (70 mm)
Aluminum or steel
Plastic
SI-0078A-001-00
Produkt Specifikationer
| Mærke: | Shimano |
| Kategori: | Cykeltilbehør |
| Model: | BB-UN26-K |
Har du brug for hjælp?
Hvis du har brug for hjælp til Shimano BB-UN26-K stil et spørgsmål nedenfor, og andre brugere vil svare dig
Cykeltilbehør Shimano Manualer
7 Maj 2024
9 April 2024
6 April 2024
2 April 2024
30 Marts 2024
26 Marts 2024
22 Marts 2024
14 Marts 2024
7 Marts 2024
29 Februar 2024
Cykeltilbehør Manualer
- Cykeltilbehør Garmin
- Cykeltilbehør Thule
- Cykeltilbehør SKS
- Cykeltilbehør Biltema
- Cykeltilbehør Nedis
- Cykeltilbehør Abus
- Cykeltilbehør Crivit
- Cykeltilbehør Stanley
- Cykeltilbehør Tacx
- Cykeltilbehør Powerfix
- Cykeltilbehør Master Lock
- Cykeltilbehør Reelight
- Cykeltilbehør AXA
- Cykeltilbehør Polisport
- Cykeltilbehør SBS
- Cykeltilbehør Park Tool
- Cykeltilbehør Alatech
- Cykeltilbehør Topeak
- Cykeltilbehør Blackburn
- Cykeltilbehør Eufab
Nyeste Cykeltilbehør Manualer
8 November 2024
7 November 2024
29 Juni 2024
29 Juni 2024
29 Juni 2024
16 Juni 2024
16 Juni 2024
16 Juni 2024
16 Juni 2024
16 Juni 2024