Shimano BR-R3000 Manual


Læs nedenfor 📖 manual på dansk for Shimano BR-R3000 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 117 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Caliper Brakes
IMPORTANT NOTICE
Contact the place of purchase or a distributor for information on installation,
adjustment, and replacement of the products which are not found in the user's
manual. A dealer's manual for professional and experienced bicycle mechanics is
available on our website (https://si.shimano.com).
For safety, be sure to read this “user's manual” thoroughly
before use, follow it for correct use, and store it so that it
can be referenced at any time.
The following instructions must be observed at all times in order to prevent
personal injury and physical damage to equipment and surroundings. The
instructions are classified according to the degree of danger or damage which may
occur if the product is used incorrectly.
DANGER Failure to follow the instructions will result in
death or serious injury.
WARNING Failure to follow the instructions could result in
death or serious injury.
CAUTION
Failure to follow the instructions could cause
personal injury or physical damage to equipment
and surroundings.
Important safety information
WARNING
Because each bicycle may handle slightly differently depending on the model, be
sure to learn the proper braking technique (including brake lever pressure and
bicycle control characteristics) and operation of your bicycle. Improper use of your
bicycle's brake system may result in a loss of control or a fall, which could lead to
severe injury.
Do not disassemble or modify the product. This may cause the product to not
operate correctly, and you may suddenly fall and be seriously injured.
Do not apply the front brake too strongly. If you do so, the front wheel may lock
and the bicycle may fall forward, and serious injury may result.
Because the required braking distance will be longer during wet weather, reduce
your speed and apply the brakes early and gently. You may fall or collide and be
seriously injured.
A wet road surface may cause tires to lose traction; therefore, to avoid this,
reduce your speed and apply the brakes early and gently. If the tires lose traction,
you may fall and be seriously injured.
Do not allow any oil or grease to get onto the brake shoes. Riding the bicycle
with oil or grease on the brake shoes may prevent the brakes from operating and
result in serious injury due to a fall or collision.
Do not use the brake cable if it has any rust, fraying, or cracks. Otherwise, the
brakes may not work correctly.
Notice
When combined with a ceramic rim, SHIMANO road brake shoes wear down more
quickly.
If the brake shoes have worn down until the grooves are no longer visible, consult
your place of purchase or a distributor.
Different brake shoes have their own characteristics. Ask the place of purchase or
a distributor for details when purchasing the brake shoes.
Products are not guaranteed against natural wear and deterioration from normal
use and aging.
For maximum performance we highly recommend SHIMANO lubricants and
maintenance products.
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are found,
consult your place of purchase or a distributor.
Do the front and rear brakes work correctly?
Does the brake cable have any rust, fraying, or cracks?
Have the brake shoes worn down to the grooves?
Are there signs of cracks or peeling on the levers?
Are there any abnormal noises?
Names of parts
Grooves of brake
shoe
Brake cable
Brake shoe
Rim surface
Caliper brake
How to operate
When removing the wheel, set the quick release lever of the brake caliper to the
“Open” position.
When installing the wheel, set the quick release lever to the “Open” position. After
installation, make sure to set it to the “Close” position and ensure that the brakes
are working correctly before riding the bicycle.
* The open/close positions for the quick release lever vary by model.
Quick release lever
Quick release lever
Open
Open
Close Close
For models with a CLOSE position mark on the quick release lever and brake caliper
side, align the marks. At this time, check for a click.
CLOSE position
mark
UM-8GY0A-005 User's Manual
Please note: specifications are subject to change for improvement without notice. (English)
© Feb. 2021 by SHIMANO INC. ITP
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan


Produkt Specifikationer

Mærke: Shimano
Kategori: Ikke kategoriseret
Model: BR-R3000

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano BR-R3000 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Shimano Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer