Shimano SW-9071 Manual


Læs nedenfor 📖 manual på dansk for Shimano SW-9071 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 23 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Shifting Switch for Aero
Bar (for Time Trial /
Triathlon)
IMPORTANT NOTICE
Contact the place of purchase or a distributor for information on
installation, adjustment, and replacement of the products which are not
found in the user's manual. A dealer's manual for professional and
experienced bicycle mechanics is available on our website (https://si.
shimano.com).
For safety, be sure to read this “user's manual”
thoroughly before use, follow it for correct use, and
store it so that it can be referenced at any time.
The following instructions must be observed at all times in order to
prevent personal injury and physical damage to equipment and
surroundings. The instructions are classified according to the degree of
danger or damage which may occur if the product is used incorrectly.
DANGER Failure to follow the instructions will result
in death or serious injury.
WARNING Failure to follow the instructions could
result in death or serious injury.
CAUTION
Failure to follow the instructions could
cause personal injury or physical damage
to equipment and surroundings.
Important safety information
WARNING
Do not disassemble or modify the product. This may cause the product
to not operate correctly, and you may suddenly fall and be seriously
injured.
When operating the shifting switch, be careful not to allow your
fingers to be caught in the derailleur. The powerful motor which
drives the electronic gear shifting derailleur will operate
without stopping until the shifting position is reached.
Notice
Be sure to rotate the crank when carrying out any operations which are
related to gear shifting.
Be careful not to get water into the E-TUBE ports.
The components are designed to be fully waterproofed to withstand
wet weather riding conditions; however, do not deliberately place them
into water.
Do not clean the bicycle with a high-pressure washer. If water gets into
any of the components, operating problems or rusting may result.
Handle the components carefully, and avoid subjecting them to strong
shock.
Contact the place of purchase for updates of the component software.
The most up-to-date information is available on the SHIMANO website.
Do not use the thinners or harsh solvents to clean the products. Such
solvents may damage the surface.
Products are not guaranteed against natural wear and deterioration
from normal use and aging.
For maximum performance we highly recommend SHIMANO lubricants
and maintenance products.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are
found, consult your place of purchase or a distributor.
Is gear shifting carried out smoothly?
Are the shifting switches attached to the handlebars snugly?
Do any abnormal noises occur during operation?
Names of parts
* The shape differs depending on the model.
1-button type
Shifting switchShifting switch
2-button type
Shifting switch
How to operate
Gear shifting operations
Be sure to rotate the crank when carrying out any operations which are
related to gear shifting.
Rear shifting switch operation
* The shape differs depending on the model.
Front Rear
Rear
Rear
Shifts to a larger sprocket.
Shifting switch [X]:
X
Y
X
X
X
Y
Y
Shifts to a smaller sprocket.
Shifting switch [Y]:
Y
Front shifting switch operation
Y
Front Rear
X Y
Shifts to a smaller chainring.
Shifting switch [X]:
Shifts to a larger chainring.
Shifting switch [Y]:
Actual behavior may differ depending on the connected components and
software version.
Shifting switches [X] and [Y] can be switched between shifting up and
down. The shifting switches can also be switched to serve as the rear
shifting switch and front shifting switch.
* To switch the shifting switches, contact the place of purchase.
UM-7FN0B-000 User's Manual
Please note: specifications are subject to change for improvement without notice. (English)
© Jan. 2021 by SHIMANO INC. ITP
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
Roebuck Way, Knowlhill, Milton Keynes, Buckinghamshire, MK5 8HL, United Kingdom
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan


Produkt Specifikationer

Mærke: Shimano
Kategori: Ikke kategoriseret
Model: SW-9071

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano SW-9071 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Shimano Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024