Shimano WH-RS010-CL-R Manual

Shimano Ikke kategoriseret WH-RS010-CL-R

Læs nedenfor 📖 manual på dansk for Shimano WH-RS010-CL-R (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
UM-4T70A-005-00 User's manual
Road Wheel Set
User's manuals in other languages are available at :
http://si.shimano.com
IMPORTANT NOTICE
Contact the place of purchase or a bicycle dealer for information
on installation and adjustment of the products which are not
found in the user's manual. A dealer's manual for professional
and experienced bicycle mechanics is available on our website
(http://si.shimano.com).
Do not disassemble or alter this product.
For safety, be sure to read this user's manual
thoroughly before use, and follow it for correct
use.
Important Safety Information
For replacement information, contact the place of purchase or a
bicycle dealer.
WARNING
Before use, check the wheels to make sure that there are no bent
or loose spokes, dents, scratches or cracks on the rim surface. Do
not use the wheel if any of these problems are found. The wheel
may break, and you may fall. In the case of carbon wheels, check
also that there is no carbon separation or cracking.
If the quick release mechanism is not used correctly, the wheel
may come off the bicycle and serious injury could result. Read the
Service Instructions for the quick release mechanism thoroughly
before use.
If the wheels are used in harsh conditions such as on unpaved
surfaces, they may become bent or damaged, which may then
result in accidents.
Check that the wheels are fastened securely before riding the
bicycle. If the wheels are loose in any way, they may come off the
bicycle and serious injury may result.
After reading the user's manual carefully, keep it in a safe place
for later reference.
Clincher wheel/Tubeless wheel
The hollow on the opposite side to the valve hole is an indicator
for the amount of rim wear. If this hollow can no longer be seen,
stop using the rim.
If you continue using the rim, it may break, and the bicycle may
fall over and an accident may result.
Tubular wheel
Before riding, check that the tires are securely glued to the rims.
If the tires come off while riding, you may fall and get severely
injured.
If the braking surfaces of the carbon fi ber rims become extremely
worn and the rims appear to have become deformed, stop riding
the bicycle. If you continue to ride the bicycle in this condition, it
may fall over and serious injury may occur as a result.
CAUTION
The tires should be infl ated to the pressure indicated on the tires
before use.
Note that a higher rim is more affected by side winds and makes
riding unstable.
If you will be using a puncture repair agent, consult the place of
purchase or a bicycle dealer.
Note
Before use, check that there are no pieces of metal or other foreign
objects sticking to the brake pads. If any such items are present,
they may cause damage to the rim when the brakes are applied.
For the use of the attached nipple wrench tool, ask the place of
purchase or the distributor.
Special nipple wrenches are available as optional accessories.
Do not apply any oil to the inside of the hub, otherwise the
grease will come out.
We recommend that you ask bicycle dealers to adjust the spoke
tensions if there is any initial play in the spokes and after the fi rst
1,000 km of riding.
Products are not guaranteed against natural wear and
deterioration from normal use and aging.
For maximum performance we highly recommend Shimano
lubricants and maintenance products.
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems
are found with the following items, contact the place of purchase
or a bicycle dealer.
Are the tubular tires put on properly?
Are there any bent or loose spokes?
Are there any dents, scratches, or cracks on the rim surface?
Are the wheels fi xed?
Are there any pieces of metal or other foreign objects
sticking to the brake shoes?
Do the wheels rotate smoothly?
Is there any noise from the wheels?
Names of parts
Quick release lever
Brake shoe
Rim surface
Wear out
indicator
Valve hole
Spoke
Hub
Rim
height
Please note: specifications are subject to change for improvement without notice. (English)
© Mar. 2018 by Shimano Inc. ITP


Produkt Specifikationer

Mærke: Shimano
Kategori: Ikke kategoriseret
Model: WH-RS010-CL-R

Har du brug for hjælp?

Hvis du har brug for hjælp til Shimano WH-RS010-CL-R stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Shimano Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024