Shure 503BG Manual

Shure Mikrofon 503BG

Læs nedenfor 📖 manual på dansk for Shure 503BG (3 sider) i kategorien Mikrofon. Denne guide var nyttig for 26 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
General Description
Developed for computer voice recognition applications, the 503BG microphone
offers excellent voice fidelity while reducing background noise. Also use the
503BG in other close-talking applications such as paging and talkback.
The 503BG features a low-impedance, moving coil type transducer with an
integral humbucking coil and an attached two-conductor shielded cable with
a built-in strain relief. It produces a frequency response with an essentially
constant output voltage over the voice spectrum when used close to the
sound source.
The 503BG's case is aluminum with a black enamel finish. It mounts to a
gooseneck, a fixed pipe or a microphone stand using a standard 5/8"-27
thread. To secure the mounted BG503, tighten the 4-40 screw with the sup-
plied #4 Allen (hex-head) wrench.
Features
Optimized performance in voice processing and computer voice recogni-
tion applications.
Smooth frequency response with excellent fidelity in the voice range.
Cardioid pickup pattern and close-talking operation keep unwanted signals
and background noise at low levels.
Constant output over voice spectrum when close-talked.
Humbucking coil minimizes undesirable hum effects such as CRT inter-
ference.
Low-impedance design permits long cable runs in extreme hum fields.
Small unobtrusive design does not interfere with CRT visibility.
Rugged and reliable for years of consistent operation.
Operation
For best performance, speak as close to the 503BG as comfort permits. A
distance of 1 to 5 cm (0.4 to 2 inches) provides the greatest discriminations
between voice and background noise.
Acoustic Considerations
The 503BG maximizes performance in close-talking applications through its
tailored frequency response, directionality and distance discrimination. It
optimizes and controls sounds within the 100 to 7000 Hz frequency range
and reduces sounds outside that range. The BG503 rejects noise through
its inherent directional properties and discriminates against distant sounds
in favor of close-range sounds.
Specifications
Type
Dynamic (moving coil), Unidirectional (Cardioid)
Frequency Response
100 to 7,000 Hz
Impedance
170 Ω actual
Output Clipping Level
open circuit voltage
-61.5 dBV/Pa (.84 mV) [1]
Polarity
Positive pressure on diaphragm produces positive voltage on white conductor with respect to black conductor
Hum Pickup
Maximum 15 dB equivalent SPL in m0e field
1/3©2017 Shure Incorporated
Model 503BG
Vocal Microphone


Produkt Specifikationer

Mærke: Shure
Kategori: Mikrofon
Model: 503BG

Har du brug for hjælp?

Hvis du har brug for hjælp til Shure 503BG stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mikrofon Shure Manualer

Shure

Shure VP89M Manual

29 December 2024
Shure

Shure PGA DRUMKIT4 Manual

29 December 2024
Shure

Shure PGA DRUMKIT6 Manual

29 December 2024
Shure

Shure Microflex MX395 Manual

29 December 2024
Shure

Shure KSM11 Manual

29 December 2024
Shure

Shure GLXD+FM Manual

23 December 2024
Shure

Shure MoveMic Manual

17 November 2024
Shure

Shure MXA901-R Manual

6 September 2024
Shure

Shure SBC-DC-903 Manual

3 September 2024
Shure

Shure AXT910 Manual

2 September 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

Vonyx

Vonyx CMS320B Manual

15 Januar 2025
BOYA

BOYA BY-PM700 Manual

14 Januar 2025
DJI

DJI Mic Mini Manual

14 Januar 2025
HyperX

HyperX QuadCast S Manual

12 Januar 2025
Schertler

Schertler STAT-C Manual

11 Januar 2025
AKG

AKG GN50 M Manual

10 Januar 2025