Shure 55SH Series II Manual

Shure Mikrofon 55SH Series II

Læs nedenfor 📖 manual på dansk for Shure 55SH Series II (2 sider) i kategorien Mikrofon. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
General Description
The Model 55SH Series II provides the Shure Iconic UNIDYNE design coupled
with modern acoustic components to meet today's performance standards.
This microphone is excellent for vocal pickup with its characteristic Shure
presence peak.
The 55SH Series II has a cardioid (unidirectional) polar pickup pattern that
minimizes sound pickup from the rear of the microphone. This allows the
Model 55SH Series II to be used in close proximity to loudspeakers without
creating feedback problems, and it can perform under adverse acoustic
conditions where omnidirectional microphones cannot.
The 55SH Series II has a low-impedance balanced output designed for
connection to microphone inputs rated at 75 to 300 ohms. The microphone
features a cartridge shock mount to reduce stand noise, an On/Off switch,
and an attached, self-tensioning, 5/8"–27 thread swivel mount.
This microphone is ideal for public address or theater-stage sound systems,
as well as for broadcasting, recording, and other sound applications where
a stand-mounted microphone with a classic look is desirable.
Features
Uniform cardioid pick-up pattern for maximum gain before feedback and
excellent rejection of off-axis sound
Tailored frequency response specifically shaped for speech, vocals and
instrumental music
Chrome die-cast metal construction and mechanical design resists wear
and abuse
Classic appearance, modern performance
Shock mounted cartridge minimizes stand transmitted noise, ensures
quiet operation
Self-tensioning swivel mount permits tilting through 45 degrees forward
and 80 degrees backward
On/Off switch
Shure quality, ruggedness and reliability
Specifications
Type
Dynamic (moving coil)
Frequency Response
50 to 15,000 Hz
Polar Pattern
Cardioid
Output Impedance
EIA rated at 150 Ω (270 Ω actual)
Sensitivity
at 1 kHz, open circuit voltage
-58.0 dBV/Pa[1]
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with re-
spect to pin 3
Weight
0.624 kg (1.37 lb)
Housing
Chrome-plated die casting
0
98765432 98765432
+20
+10
0
–10
–20
dB
20 50 100 1000 10000 20000
Hz
Typical Frequency Response
50 Hz
200 Hz
500 Hz
1000 Hz
5000 Hz
Typical Polar Patterns
0[1] 1 Pa = 94 dB SPL
1/2©2017 Shure Incorporated
Model 55SH-II
Iconic Unidyne Vocal Microphone


Produkt Specifikationer

Mærke: Shure
Kategori: Mikrofon
Model: 55SH Series II

Har du brug for hjælp?

Hvis du har brug for hjælp til Shure 55SH Series II stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mikrofon Shure Manualer

Shure

Shure MoveMic Manual

17 November 2024
Shure

Shure MXA901-R Manual

6 September 2024
Shure

Shure SBC-DC-903 Manual

3 September 2024
Shure

Shure AXT910 Manual

2 September 2024
Shure

Shure ADX3 Manual

2 September 2024
Shure

Shure SM7dB Manual

27 August 2024
Shure

Shure MX412SE/C Manual

20 August 2024
Shure

Shure SLXD24/SM86 Manual

20 August 2024
Shure

Shure SBC10-904 Manual

19 August 2024
Shure

Shure PG27 Manual

19 August 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

Vimar

Vimar 20586 Manual

15 December 2024
Vimar

Vimar 19586.M Manual

15 December 2024
Vimar

Vimar 20586.B Manual

15 December 2024
Vimar

Vimar 20586.N Manual

15 December 2024
Vimar

Vimar 19586 Manual

15 December 2024
Vimar

Vimar 19586.B Manual

15 December 2024
Power Dynamics

Power Dynamics PD220 Manual

15 December 2024
LD Systems

LD Systems MIBS Manual

14 December 2024
LD Systems

LD Systems U304.7 BP Manual

14 December 2024
SteelSeries

SteelSeries Alias Pro Manual

14 December 2024