Shure Centraverse CVO Manual

Shure Mikrofon Centraverse CVO

Læs nedenfor 📖 manual på dansk for Shure Centraverse CVO (2 sider) i kategorien Mikrofon. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

27A20378 (Rev. )3

Model Variations

CVO-B/C: Cardioid, black

CVO-W/C: Cardioid, white

Centraverse Overhead Microphone

The Centraverse CVO is a professional low pro-

file electret condenser microphone designed for

overhead sound reinforcement applications. An in-

tegrated wire aiming hanger is included for optimal

placement above choirs and other ensembles with

minimal effort.

Note: Model availability depends on region.

See your local Shure dealer or distributor for

details.

Features

• Cardioid pickup pattern

• Commshield® technology guards against

unwanted RF interference from portable

wireless devices (smartphones, etc.)

• Superior Shure design and rugged, dependable

construction

• Attached 25 ft XLR cable

• Included snap-fit windscreen

Installation

1. Attach the wire hanger:

• Snap the wire into the groove on the microphone body.

• Guide the cable through the spiral at the end of the wire,

beginning at the bottom and working toward the exit.

2. Hang the microphone according to the guidelines for placement.

3. Aim the microphone toward the sound source by holding the wire

hanger in place and twisting the microphone body.

4. If necessary, tie a strong transparent thread or fishing line to the loop at

the end of the wire hanger and attach it to a ceiling anchor for additional

stability.

5. Connect the XLR cable to a mixer or P.A. system.

Note: This microphone requires +48V phantom power to operate.

.6 – 1 m

(2 – 3 ft.)

.6 – 1 m

(2 – 3 ft.)

1.8 – 3m

(6 – 9 ft.)

0.6 – 1m

(2-3 ft.)

Microphone Placement and Use

1. If using multiple Shure Centraverse overhead micro-3:1 Rule:

phones, the distance between the microphones should be three

times greater than the distance between the microphone and the

sound source.

2. Place the microphone in front of the choir, above Choir Installations:

their heads and aimed at the back row.

3. Use the supplied snap-fit windscreen to eliminate wind Windscreen:

noise and plosives. To install the windsreen, snap it into the first groove

on the microphone head. To remove the windscreen, locate the gap

in the ring and use your fingernail to pull the windscreen off from the

right-hand side.

Centraverse™ Series

Installed Sound Microphones

CVO

Produkt Specifikationer

Mærke:	Shure
Kategori:	Mikrofon
Model:	Centraverse CVO

Har du brug for hjælp?

Hvis du har brug for hjælp til Shure Centraverse CVO stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikrofon Shure Manualer

Shure MoveMic Manual

17 November 2024

Shure MXA901-R Manual

6 September 2024

Shure SBC-DC-903 Manual

3 September 2024

Shure AXT910 Manual

2 September 2024

Shure ADX3 Manual

2 September 2024

Shure SM7dB Manual

27 August 2024

Shure MX412SE/C Manual

20 August 2024

Shure SLXD24/SM86 Manual

20 August 2024

Shure SBC10-904 Manual

19 August 2024

Shure PG27 Manual

19 August 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

15 December 2024

15 December 2024

15 December 2024

15 December 2024

15 December 2024

15 December 2024

Power Dynamics PD220 Manual

15 December 2024

LD Systems MIBS Manual

14 December 2024

LD Systems U304.7 BP Manual

14 December 2024

SteelSeries Alias Pro Manual

14 December 2024