Sirui K-10X Manual

Sirui Stativ K-10X

Læs nedenfor 📖 manual på dansk for Sirui K-10X (4 sider) i kategorien Stativ. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/4
2.Attaching Your Ball Head
UNC3/8"
Mounting
Screw
4.Attaching and Removing the
Quick Release Plate
3.Know your Quick Release
Clamp and Quick Release Plate
Figure 2-1 Figure 2-2
UNC3/8"
Screw Hole
Tighten
Quick Release Clamp:
Clamp Jaw
Loosen
Bubble Level
Clamp Plate
Security Pin
Clamp locking knob
Security Pin
Release Button
Quick Release Plate:
Common Plate
Tighten
Loosen
Stop
Stop Loosen Press
1.Know Your Ball Head
Friction Adjuster
Dial
Quick Release
Clamp
Main Body
Main Locking
Knob
Panning Base
Support Ball
Panning Base Locking Knob
Figure 4-1
Figure 2-2
Figure 4-3 Figure 4-4
Slide-proof Rubber Mat
KX Series:
Strap holder
Bubble Levels
Figure 3-1
Figure 3-2
1/4" screw with buckle
standard 1/4" screw
1.Know Your Ball Head
2.Attaching Your Ball Head
a.To attach the ball head onto the tripod, you must make
sure that the mounting screw of your tripod is 3/8". If it is
1/4" you will need to get a 3/8" screw or adapter.Many
professional tripods have reversible screws.Please check
your tripod manual for more details.
b.Lock the Panning Base Locking Knob by turning it in a
clockwise direction. As shown on Figure 2-1 & 2-2, align the
3/8" thread hole at the bottom of the Ball Head with the
mounting screw on the tripod. Hold by the base of the Ball
Head and rotate in a clockwise direction until it is locked
tightly.
3.Know your Quick Release Clamp and Quick Release
Plate
4.Attaching and Removing the Quick Release Plate
a.Attaching the QR Plate to Your Camera
Select the QR Plate that matches the base of your
camera.(To prevent excessive wear to the camera's tripod
socket, you should not frequently attach and remove the
Quick Release Plate. It is quite common to leave the QR
Plate permanently attached to the camera.)
The side of the Quick Release Plate with the slide-proof
rubber mat must be facing the base of the camera. Make
sure the QR Plate screw aligns with the tripod socket on the
bottom of the camera.
Position the QR plate on the camera body and tighten the
screw with a coin or allen key. If you plan to keep the quick
release plate on your camera for a long period of time or you
are using medium or large format cameras, you should
tighten the screw with the allen key.
b.Attaching the camera with QR Plate onto the Ball Head
Slightly loosen the Clamp Locking Knob by turning it
counter-clockwise, slide the QR plate laterally into the Quick
Release Clamp (Figure 4-1) and tighten the clamp by turning
clockwise. Another method is to fully open the Clamp
Locking Knob and place the plate in from the top (Figure 4-
2). Tighten the knob to lock the camera in place.
c.Security Pin on the Quick Release Clamp
There is a safety lock on the top of the Quick Release Clamp
that effectively prevents the camera from sliding off of the
clamp if it is slightly loosened (Figure 4-3). This allows you to
make minor adjustments of the camera position on the Ball
Head without worrying about the camera sliding off of the
Quick Release Clamp. This feature is available with all Sirui
QR plates. (Warning: While other styles of QR plates can be
used on Sirui Ball Heads, this safety feature may not be
available with other brands of QR plates. Even with the Sirui
QR Plates,you should hold your camera while loosening the
Quick Release Clamp).
d.Removing the Camera with QR Plate from the Ball Head
While holding the camera, loosen the Clamp Locking Knob
by slightly turning it counter-clock-wise. Push in the
Security Pin Release Button and slide the camera off of the
Clamp Plate (Figure 4-4). You can also remove the camera
by fully opening the clamp and lifting the camera out of the
clamp.
KX B H Series all ead
INSTRUCTIONS
Professional Photographic Equipment
Address: The Third ndustrial District,Wuguishan Town,Zhongshan City,Guangdong,China
E-mail: info@sirui-photo.com http://www.sirui-photo.com http://www.zssirui.com
Tel: 0086-760-88897373 Fax: 0086-760-88207062 P.C: 528458
Service Hotline: (0086)400 830 2299
I
SIRUI Photographic Equipment Industry(Zhongshan) CO.,Ltd
K 10X-
K-20X
K-30X
K-40X
0.35/0.77
0.4/0.88
0.5/1.10
0.8/1.76
20/44.1
25/55.1
30/66.1
35/77.2
Diameter
mm/inch
Weight
kg/lb
Maximum
Load
kg/lb
KX Series Ball Head Data Char t
Height
mm/inch
93/3.7
98/3.9
106/4.2
124/4.9
33/1.3
38/1.5
44/1.7
54/2.1

Produkt Specifikationer

Mærke: Sirui
Kategori: Stativ
Model: K-10X

Har du brug for hjælp?

Hvis du har brug for hjælp til Sirui K-10X stil et spørgsmål nedenfor, og andre brugere vil svare dig


Stativ Sirui Manualer

Sirui

Sirui P-325FS Manual

28 August 2024
Sirui

Sirui UltraLight T-025X Manual

27 August 2024
Sirui

Sirui K-20X Manual

27 August 2024
Sirui

Sirui UltraLight T-005SK Manual

27 August 2024
Sirui

Sirui ET-1204 + Manual

27 August 2024
Sirui

Sirui K-30X Manual

27 August 2024
Sirui

Sirui A-1205 Tripod Manual

27 August 2024
Sirui

Sirui P-204SR Manual

27 August 2024
Sirui

Sirui UltraLight T-005X Manual

27 August 2024
Sirui

Sirui ET-2004 Manual

27 August 2024

Stativ Manualer

Nyeste Stativ Manualer

Rollei

Rollei Rock Solid Beta 180 Carbon Manual

14 December 2024
Omnitronic

Omnitronic GBE-1 Manual

14 December 2024
Robus

Robus Vantage Series 3 RCM-633 Manual

12 December 2024
Oben

Oben CQL-13 Manual

12 December 2024
Oben

Oben IBH-05 Manual

12 December 2024
Robus

Robus RCMTT-1113 Manual

12 December 2024
Oben

Oben GH3W-15 Manual

12 December 2024
Robus

Robus RCTT-200 Manual

12 December 2024
Really Right Stuff

Really Right Stuff TVC-32G Manual

11 December 2024
REVO

REVO AC-GRB Manual

11 December 2024