Snow Joe SJ-SHLV01 Manual


Læs nedenfor 📖 manual på dansk for Snow Joe SJ-SHLV01 (2 sider) i kategorien Sneeuwblazer. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
A Division of Snow Joe
®, LLC
© 2018 by Snow Joe
®, LLC
All rights reserved. Original instructions.
Model SJ-SHLV01
SHOVELUTIONTM 18" SNOW SHOVEL
ASSEMBLY INSTRUCTIONS
R
mCAUTION!
HANDLE IS SPRING LOADED UNDER HEAVY TENSION.
To avoid injury, securely grasp handle before cutting zip ties.
Then, remove retaining strap and save for later storage.
FOR STORAGE:
Make a loop with the retaining strap around the spring-loaded
handle, and with the other end, secure to knob on the upper pole.
NOTE: If you have further questions, please contact the Snow Joe
® + Sun Joe®
customer service center at 1-866-SNOWJOE (1-866-766-9563).
TO DISASSEMBLE:
Follow instructions above in reverse order.
TO ASSEMBLE:
1. Depress the small button at the end
of the lower pole, push and insert the
lower pole into the poly blade unit until
it snaps securely into place.
2. Remove the knob and the bolt from
the upper pole.
3. Insert the top of the lower pole into the
upper pole.
4. Align bolt holes, insert the bolt into the
square hole, through pole.
5. Tighten with the knob.
lower
pole
upper
pole
knob bolt
poly blade
unit


Produkt Specifikationer

Mærke: Snow Joe
Kategori: Sneeuwblazer
Model: SJ-SHLV01

Har du brug for hjælp?

Hvis du har brug for hjælp til Snow Joe SJ-SHLV01 stil et spørgsmål nedenfor, og andre brugere vil svare dig