Snow Joe SJ-SHLV01-RED Manual

Snow Joe Sneslynge SJ-SHLV01-RED

Læs nedenfor 📖 manual på dansk for Snow Joe SJ-SHLV01-RED (2 sider) i kategorien Sneslynge. Denne guide var nyttig for 32 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
A Division of Snow Joe®, LLC
© 2016 by Snow Joe®, LLC
All rights reserved. Original instructions.
Model SJ-SHLV01
BACK SAVING SNOW SHOVEL
ASSEMBLY INSTRUCTIONS
R
mCAUTION!
HANDLE IS SPRING LOADED UNDER HEAVY TENSION.
To avoid injury, securely grasp handle before cutting zip ties.
Then, remove retaining strap and save for later storage.
TO ASSEMBLE:
1. Remove the knob and the bolt.
2. Insert the lower pole into the upper pole.
3. Align bolt holes, insert the bolt into the square hole,
through pole.
4. Tighten with the knob.
FOR STORAGE:
Make a loop with the retaining strap around the spring-loaded
handle, and with the other end, secure to knob on the upper
pole.
NOTE: If you have further questions, please contact the Snow Joe
® +
Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563).
TO DISASSEMBLE:
Follow instructions above in reverse order.


Produkt Specifikationer

Mærke: Snow Joe
Kategori: Sneslynge
Model: SJ-SHLV01-RED

Har du brug for hjælp?

Hvis du har brug for hjælp til Snow Joe SJ-SHLV01-RED stil et spørgsmål nedenfor, og andre brugere vil svare dig