Sony CMT-CX5BiP Manual

Sony Hi-Fi system CMT-CX5BiP

Læs nedenfor 📖 manual på dansk for Sony CMT-CX5BiP (4 sider) i kategorien Hi-Fi system. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/4
WARNING
To reduce the risk of re, do not cover the ventilation
opening of the apparatus with newspapers, tablecloths,
curtains, etc. Do not place the naked ame sources such
as lighted candles on the apparatus.
To reduce the risk of re or electric shock, do not expose
this apparatus to dripping or splashing, and do not place
objects lled with liquids, such as vases, on the apparatus.
Do not install the appliance in a conned space, such as a
bookcase or built-in cabinet.
As the main plug is used to disconnect the unit from the
mains, connect the unit to an easily accessible AC outlet.
Should you notice an abnormality in the unit, disconnect
the main plug from the AC outlet immediately.
Do not expose batteries or apparatus with battery-
installed to excessive heat such as sunshine, re or the
like.
e unit is not disconnected from the mains as long as it
is connected to the AC outlet, even if the unit itself has
been turned o.
e nameplate is located on the bottom exterior of the
main unit.
WARNING
To prevent injury, this apparatus must be securely
attached to the wall in accordance with the installation
instructions.
CAUTION
e use of optical instruments with this product will
increase eye hazard.
is appliance is classied
as a CLASS 1 LASER
product. is marking
is located on the bottom
exterior of the main unit.
e unit is equipped with three ferrite cores for the
speaker cords and power cord.
Do not remove the ferrite cores. Doing so may cause EMI
(Electro Magnetic Interference) interference.
Notice for customers: the following
information is only applicable to
equipment sold in countries applying EU
directives.
e manufacturer of this product is Sony Corporation,
1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. e
Authorized Representative for EMC and product safety is
Sony Deutschland GmbH, Hedelnger Strasse 61, 70327
Stuttgart, Germany. For any service or guarantee matters
please refer to the addresses given in separate service or
guarantee documents.
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
is symbol on the product or on its packaging indicates
that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. e recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Oce, your household waste
disposal service or the shop where you purchased the
product.
Applicable accessory: Remote commander
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
is symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. e chemical
symbols for mercury (Hg) or lead (Pb) are added if the
battery contains more than 0.0005% mercury or 0.004%
lead.
By ensuring these batteries are disposed of correctly,
you will help prevent potentially negative consequences
for the environment and human health which could
otherwise be caused by inappropriate waste handling of
the battery. e recycling of the materials will help to
conserve natural resources.
In case of products that for safety, performance or data
integrity reasons require a permanent connection with an
incorporated battery, this battery should be replaced by
qualied service sta only. To ensure that the battery will
be treated properly, hand over the product at end-of-life
to the applicable collection point for the recycling of
electrical and electronic equipment.
For all other batteries, please view the section on how
to remove the battery from the product safely. Hand the
battery over to the applicable collection point for the
recycling of waste batteries.
For more detailed information about recycling of this
product or battery, please contact your local Civic Oce,
your household waste disposal service or the shop where
you purchased the product.
Note on DualDiscs
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
Music discs encoded with copyright
protection technologies
is product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
License and Trademark Notice
iPhone, iPod, iPod classic, iPod nano, and iPod touch
are trademarks of Apple Inc., registered in the U.S. and
other countries.
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and omson.
Windows Media is either a registered trademark or
trademark of Microso Corporation in the United
States and/or other countries.
is product is protected by certain intellectual
property rights of Microso Corporation. Use or
distribution of such technology outside of this product
is prohibited without a license from Microso or an
authorized Microso subsidiary.
All other trademarks and registered trademarks are of
their respective holders. In this manual, ™ and ® marks
are not specied.
Location of Controls
Unit (Top)
Unit (Front)
Rear
Remote
is manual mainly explains operations using the
remote, but the same operations can also be performed
using the buttons on the unit having the same or similar
names.
To use the remote
Slide and remove the battery compartment lid, and insert
the two R6 (size AA) batteries (not supplied), side
rst, matching the polarities shown below.
Notes on using the remote
With normal use, the batteries should last for about six months.
Do not mix an old battery with a new one or mix dierent types of
batteries.
If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
Getting Started
Speakers
Connect the speaker cords to the SPEAKERS jacks on
the unit.
Power
1 Connect the power cord to the AC adapter.
2 Connect the AC adapter to the unit, and then plug
the power cord in to a wall outlet.
e demonstration appears in the display. When
you press  , the system turns on and the
demonstration automatically ends. When you turn o
the system, the demonstration appears again on the
display.
When you set the clock, the system goes to Power
Saving mode and the demonstration is canceled.
Operations
Playing a CD/MP3 disc
1 Select the CD function.
Press FUNCTION +/ repeatedly.
2 Insert a disc.
Insert a disc in the disc slot with the label side facing
forward.
Insert a disc with the
label side facing forward.
Eject a disc
3 Start playback.
Press (play) .
Notes
When you turn on the system, the disc is not pulled into the disc slot
until “No Disc” appears in the display. Do not attempt to push in the
disc until “No Disc” appears.
Do not insert a disc with non-standard shapes (e.g., heart, square,
star). e disc may fall into the system and cause irreparable
damage.
When pressing (eject) on the unit and then reinserting the disc
that appears in the disc slot, do not simply push in the disc. Remove
the disc from the disc slot and then reinsert it.
Do not turn o the system with a disc halfway inserted in the disc
slot. Doing so may cause the disc to fall.
Do not use a disc with tape, seals or paste on it as this may cause
malfunction.
When you eject a disc, handle the disc by its edge. Do not touch the
surface.
Do not push a disc into the disc slot when the system is o. Doing so
may cause the system to malfunction.
Do not insert an 8 cm disc with an adapter. Doing so may cause the
system to malfunction.
Other operations
To Press
Pause playback (pause) . To resume play, press
the button again.
Stop playback (stop) .
Select a folder on
an MP3 disc (select folder) +/
repeatedly.
Select a track or
le
  (go back)/ (go forward)
.
Find a point in a
track or le
Hold down (rewind)/ (fast  
forward) during playback, and
release the button at the desired
point.
Select Repeat Play REPEAT repeatedly until “REP”
or “REP1” appears.
Eject a disc on the unit
.
To change the play mode
Press PLAY MODE repeatedly while the player is
stopped. You can select Normal Play mode (“ ” for all
MP3 les in the folder on the disc), Shue Play mode
(“SHUF” or “ SHUF*” for folder shue), or Program
Play mode (“PGM”).
* When playing a CD-DA (audio) disc, (SHUF) Play performs the
same operation as normal (SHUF) Play.
Note on Repeat Play
“REP1” indicates that a single track or le is repeated until you stop
playback.
Notes on Shue Play mode
When Shue Play mode is set to “SHUF,” the system shue-plays
all tracks orles on the disc. When Shue Play mode is set to “
SHUF,” the system shue-plays all tracks or les in selected folder.
When you turn o the system, the selected Shue Play mode
(“SHUF” or “ SHUF”) is cleared and the play mode returns to
Normal Play mode (“ ”).
Notes on playing MP3 discs
Do not save other types of tracks or les, or unnecessary folders on a
disc that has MP3 les.
Folders that have no MP3 les are skipped.
MP3 les are played back in the order that they are recorded onto
the disc.
e system can only play MP3 les that have a le extension of
“.mp3”.
Even when le name has the “.mp3” le extension, if the actual
le diers, playing this le may generate a loud noise which could
damage the speaker system and the system may malfunction.
e maximum number of:
folders is 255 (including the root folder).
MP3 les is 511.
MP3 les and folders that can be contained on a single disc is 512.
folder levels (the tree structure of les) is 8.
Compatibility with all MP3 encoding/writing soware, recording
device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play
at all.
Notes on playing multisession discs
If the rst session on the disc is a CD-DA session, the other sessions
on the disc cannot be recognized regardless of the session format;
only CD-DA tracks in the rst session can be played back.
If the session format for the rst session is CD-ROM and the
following sessions are recorded in the same format, the system will
continue to play back MP3 les accordingly in multiple sessions
until the system encounters another session recorded in a dierent
format.
Installations
Screw Screw Screw Screw
Right Speaker
(Center)
Left Speaker Main unit
Speaker cord (right)
Speaker cord (left)
To AC Adapter
DAB/FM lead antenna (Extend it horizontally.)
DAB/ FM antenna
Find a location and an orientation that provide good
reception, and then set up the antenna.
Keep the antennas away from the speaker cords and the
power cord to avoid picking up noise.
To use the iPod/iPhone
Push up the panel and insert a Dock Adapter into the
Dock before using. When using an iPod model, use the
Dock Adapter supplied with your iPod. When using an
iPhone model, use the Dock Adapter supplied with the
system. For details on the Dock Adapters, refer to the
instructions supplied with the Dock Adapters.
Dock Adapter
iPod/iPhone
Connector
When not using an iPod/iPhone, keep the panel closed.
To remove the Dock Adapter, pull it up with your
ngernail or a at object using the slot inside the adapter.
About Dock Adapters for iPhone models
e adapter number is shown on the bottom of Dock
Adapter.
For iPod models, use the Dock Adapter supplied with
your iPod, or purchase a compatible dock adapter from
Apple Inc.
: For iPhone
: For iPhone 3G and iPhone 3GS
: For iPhone 4
To set the clock
1 Press  to turn on the system.
2 Press TIMER MENU to select the clock set mode.
If “PLAY SET?” ashes, press /   repeatedly to
select “CLOCK SET?,” and then press (enter) .
3 Press / repeatedly to set the hour, then press
(enter) .
4 Use the same procedure to set the minutes.
Note
e clock settings are reset when you disconnect the power cord or if
a power failure occurs.
To display the clock when the system is o
Press DISPLAY . e clock is displayed for about
8 seconds.
Reception of DAB/DAB+ radio station
When you turn on the system for the rst time aer
you purchase the system, DAB Automatic Scan starts
automatically and creates a list of available services.
During the DAB Automatic Scan, “ ” appears.
Do not press any button on the unit or the remote
during DAB Automatic Scan. Scanning is interrupted
and service list may not be created properly. To run the
DAB Automatic Scan manually, perform the procedure
of “Running the DAB Automatic Scan manually” in
“Listening to the radio.” If you have moved to another
area, perform the DAB Automatic Scan manually and
re-register the contents of broadcasts.
Attaching the stand to the system
Tabs
Tabs
Tabs
Removing
Stand
1 Insert the tabs of the stand into the grooved section
of the unit.
2 While holding down bottom of the stand, insert the
tabs of the stand into the grooved section.
To remove the stand from the system
While holding down bottom of the stand, pull up the tabs
of the stand from the unit.
Hanging the system on a wall
You can install the system on a wall. Before installing,
remove the stand from the unit.
Notes
Make sure that the power cord is disconnected from the wall outlet
before installing the system.
Use screws that are suitable for the wall material and strength.
Contact a screw shop or professional installer regarding the
installation, wall material, or screws.
Insucient wall strength or use of inappropriate screws may cause
the system to fall and be damaged and may result in personal injury.
1 Attach the supplied pads to the rear of the speakers
and unit.
Location for
pasting on the
pads
2 Prepare screws (not supplied) that are suitable for
the holes on the back of the unit and speakers. See
the illustrations below.
Holes on the back of the unit
and speakers
4.6 mm
10 mm
3 Fasten the screws to the wall. The commercially
available screws should protrude 3 to 4 mm.
Install the system on a vertical and at reinforced area
of the wall.
3 to 4 mm
190 mm
Tips
When installing the speakers and unit close together, fasten the
screws to the wall according to the marks on the lower side, as
illustrated in this manual.
e distance between the screw of the unit and a speaker is
90 mm minimum. To install the system leaving space between
the unit and speakers, adjust the length of the speaker cord
before installing the system.
You can wrap the speaker cord around the protruding on the
rear of the unit, as illustrated.
4 Hang the system onto the screws.
Align the holes the back of the system to the screws,
then hang the system onto 4 screws.
Rear of the speaker
Notes
Make sure the screws are properly aligned, with their heads evenly
protruding enough to engage the holes on the back of the unit and
speakers.
Be aware that is a person or object happens to hit the system hanging
on a wall, it may fall.
Do not hang or put anything on the system hanging on a wall.
Depending on the materials of the wall, heat from the system or dust
may cause peeling or discoloration of wallpaper.
Sony is not responsible for accidents or damage caused by improper
installation, insucient wall strength or improper screw installation,
natural calamity, etc.
To enjoy better sound quality
You can get better sound quality with optimal location of
the speakers.
For better sound quality, install the system according to
the reference below.
It is better to arrange le-right placement of the
speakers according to the usual orientation of the
listener in the room.
Speakers are better installed at usual ear level in a room.
4-278-006- (1)12
Micro HI-FI
Component System
GB Operating Instructions
©2011 Sony Corporation Printed in China
CMT-CX5BiP

Produkt Specifikationer

Mærke: Sony
Kategori: Hi-Fi system
Model: CMT-CX5BiP

Har du brug for hjælp?

Hvis du har brug for hjælp til Sony CMT-CX5BiP stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hi-Fi system Sony Manualer

Sony

Sony Walkman NW-A105 Manual

12 September 2024
Sony

Sony HCD-451 Manual

3 September 2024
Sony

Sony DHC-MD373 Manual

2 September 2024
Sony

Sony HST-211 Manual

31 August 2024
Sony

Sony SHAKE-99 Manual

30 August 2024
Sony

Sony SHAKE-55 Manual

30 August 2024
Sony

Sony SHAKE-X3D Manual

30 August 2024
Sony

Sony SHAKE-77 Manual

30 August 2024
Sony

Sony MHC-GNZ8D Manual

20 August 2024
Sony

Sony XM-8ES Manual

20 August 2024

Hi-Fi system Manualer

Nyeste Hi-Fi system Manualer

Honor

Honor Earbuds X6 Manual

23 November 2024
Alba

Alba ICS105 Manual

16 November 2024
Korg

Korg Nu 1 Manual

15 November 2024
Kenwood

Kenwood UD-F5 Manual

15 November 2024
Krüger&Matz

Krüger&Matz KM1961 Manual

15 November 2024
Auna

Auna VCP-191 Manual

15 November 2024
Denon

Denon CEOL N-8 Manual

15 November 2024
Samsung

Samsung MAX-DC20900 Manual

10 November 2024
Samsung

Samsung MAX-X65 Manual

10 November 2024
Samsung

Samsung MAX-DT95 Manual

10 November 2024