Sony CMT-EH20DAB Manual

Sony Hi-Fi system CMT-EH20DAB

Læs nedenfor 📖 manual på dansk for Sony CMT-EH20DAB (2 sider) i kategorien Hi-Fi system. Denne guide var nyttig for 55 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

WARNING

To reduce the risk of re or electric shock,

do not expose this apparatus to rain or

moisture.

To reduce the risk of re, do not cover the ventilation of

the apparatus with newspapers, tablecloths, curtains, etc.

And do not place lighted candles on the apparatus.

To reduce the risk of re or electric shock, do not place

objects lled with liquids, such as vases, on the apparatus.

Connect the unit to an easily accessible AC outlet. Should

you notice an abnormality in the unit, disconnect the

main plug from the AC outlet immediately.

Do not install the appliance in a conned space, such as a

bookcase or built-in cabinet.

2-688-576- (1)11

Micro HI-FI

Component System

Operating Instructions GB

CMT-EH20DAB

using VOC (Volatile Organic

Compound)-free vegetable oil

based ink.

Hooking up the system securely

Except for customers in the U.S.A.

and Canada

is appliance is classied

as a CLASS 1 LASER

product. is marking

is located on the rear

exterior.

Disposal of Old Electrical & Electronic

Equipment

(Applicable in the European Union and

other European countries with separate

collection systems)

is symbol on the product or on its packaging indicates

that this product shall not be treated as household

waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and

electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. e recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please

contact your local Civic Oce, your household waste

disposal service or the shop where you purchased the

product.

Applicable accessories: Remote commander

Note on DualDiscs

A DualDisc is a two sided disc product which mates

DVD recorded material on one side with digital

audio material on the other side. However, since the

audio material side does not conform to the Compact

Disc (CD) standard, playback on this product is not

guaranteed.

Music discs encoded with copyright

protection technologies

is product is designed to playback discs that conform

to the Compact Disc (CD) standard. Recently, various

music discs encoded with copyright protection

technologies are marketed by some record companies.

Please be aware that among those discs, there are some

that do not conform to the CD standard and may not be

playable by this product.

MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and omson.

Antennas

Find a location and an orientation that provide good reception, and then

set up the antenna.

Keep the antenna away from the speaker cords and the power cord to

avoid picking up noise.

Before unplugging the FM/DAB antenna, make sure the system is turned

o to preserve your own FM and DAB settings.

FM/DAB lead antenna

(Extend it horizontally.)

Power

Connect the power cord to a wall socket.

If the plug does not t the wall socket, detach the

supplied plug adaptor (only for models equipped

with an adaptor).

Right speaker

Wall socket

Insert only the stripped portion of the cord.

Solid (Red/ )

Solid (Black/ )

Left speaker

Basic Operations

Open the tape

section lid.

Before using the system

To use the remote

Slide and remove the battery compartment lid , and

insert the two R6 (size AA) batteries (not supplied), 

side rst, matching the polarities shown below.

Notes on using the remote

• With normal use, the batteries should last for about six months.

• Do not mix an old battery with a new one or mix dierent types of

batteries.

• If you do not use the remote for a long period of time, remove the

batteries to avoid damage from battery leakage and corrosion.

To set the clock

1 Turn on the system.

Press (power)  .

2 Select the clock set mode.

Press CLOCK/TIMER SET  on the remote. If the

current mode appears on the display, press /  

 on the remote repeatedly to select “CLOCK,” and

then press ENTER  on the remote.

3 Set the time.

Press /    on the remote repeatedly to set

the hour, and then press ENTER  on the remote.

Use the same procedure to set the minutes.

e clock settings are lost when you disconnect the

power cord or if a power failure occurs.

To run the DAB Automatic Scan

When you turn on the system for the rst time aer

you purchase the system, DAB Automatic Scan starts

automatically and creates a list of available services.

If you want to run the DAB Automatic Scan again,

perform the procedure below.

1 Press DAB AUTO SCAN  on the unit.

“DAB SCAN” and “PUSH DAB” appear.

2 Press DAB .

Scanning begins. e scanning progress is indicated

by advancing asterisks. Depending on the DAB

services available in your area, scanning may take a

few minutes.

When scanning is complete, a list of available services

is created.

Notes

• If your country or region does not support DAB broadcast, “NO

SERV” appears.

• Do not press any button on the unit or the remote during DAB

Automatic Scan. Scanning is interrupted and service list may not be

created properly. In this case, run the DAB Automatic Scan again.

• If you move to another area, repeat this procedure to store the

stations for your new area.

• is procedure clears all previously stored presets.

• Before unplugging the DAB antenna, make sure the system is turned

o to preserve your own DAB settings.

• is tuner does not support data services.

Selecting a music source

Press the following buttons (or press FUNCTION 

repeatedly).

To select Press

CD CD on the remote.

Tuner TUNER/BAND .

DAB DAB .

Tape TAPE on the remote.

Component* (connected

using an audio cord)

FUNCTION 

repeatedly until “AUDIO

IN” appears.

* If the component has the AVLS (Automatic Volume Limiter System)

or BASS BOOST function, turn o the function to avoid distorted

sound from the speakers.

Adjusting the sound

To adjust the volume

Press VOLUME +/– on the remote (or turn the

VOLUME control on the unit) .

To add a sound eect

To Press

Generate a more dynamic

sound (Dynamic Sound

Generator X-tra)

DSGX on the unit.

Set the sound eect EQ on the remote.

Playing a CD/MP3 disc

1 Select the CD function.

Press CD on the remote (or FUNCTION repeatedly)

.

2 Place a disc.

Press PUSH OPEN/CLOSE on the unit, and place a 

disc with the label side up on the CD compartment.

To close the CD compartment, press PUSH OPEN/

CLOSE on the unit.

PUSH OPEN/CLOSE

3 Start playback.

Press (play)  on the remote (or CD/ (play/

pause)  on the unit).

To Press

Pause playback  (pause)  on the remote (or

CD/ (play/pause) on the 

unit). To resume play, press it

again.

Stop playback  (stop) .

Select a folder on an

MP3 disc

+/– on the remote.

Select a track or le  (go back/go forward)

on the remote ( / on the  

unit) .

Find a point in a

track or le

Hold down / (rewind/ 

fast forward) during playback, 

and release it at the desired point.

Select Repeat Play REPEAT on the remote 

repeatedly until “REP” appears.

To change the play mode

Press PLAY MODE  on the remote repeatedly while

the player is stopped. You can select normal play (“ ”

for all MP3 les in the folder on the disc), shue play

(“SHUF” or “ SHUF*”), or program play (“PGM”).

* When playing a CD-DA disc, (SHUF) Play performs the same

operation as SHUF Play.

Notes on Repeat Play

• All tracks or les on a disc are played repeatedly up to ve times.

• “REP1” indicates that a single track or le is repeated until you stop

it.

Notes on playing MP3 discs

• Do not save other types of tracks or les or unnecessary folders on a

disc that has MP3 les.

• Folders that have no MP3 les are skipped.

• MP3 les are played back in the order that they are recorded onto

the disc.

• e system can only play MP3 les that have a le extension of

“.MP3”.

• If there are les on the disc that have the “.MP3” le extension,

but that are not MP3 les, the unit may produce noise or may

malfunction.

• e maximum number of:

– folders is 150 (including the root folder).

– MP3 les is 255.

–

MP3 les and folders that can be contained on a single disc is 256.

– folder levels (the tree structure of les) is eight.

• Compatibility with all MP3 encoding/writing soware, recording

device, and recording media cannot be guaranteed. Incompatible

MP3 discs may produce noise or interrupted audio or may not play

at all.

Notes on playing multisession discs

• If the disc begins with a CD-DA (or MP3) session, it is recognized

as a CD-DA (or MP3) disc, and playback continues until another

session is encountered.

• A disc with a mixed CD format is recognized as a CD-DA (audio)

disc.

Listening to the radio

Before you can receive DAB, you must complete the

DAB Automatic Scan procedure (see “Before using the

system”).

1 Select “DAB” or “FM.”

Press TUNER/BAND  repeatedly. You can also

select DAB directly by pressing DAB .

2 Select the tuning mode.

Press TUNING MODE  on the remote repeatedly

until “AUTO” appears.

3 Tune in the desired station.

Press +/– on the remote (or TUNING + or – on the

unit) . Scanning stops automatically when a station

is tuned in, and then “TUNED” (DAB only) and

“STEREO” (for stereo programs) appear. When you

tune in a DAB station or an FM station that provides

RDS services, the service name or station name

appears on the display.

Tip

Press (stop)  to stop automatic scanning (FM band only).

To tune in a station with a weak signal (FM

band only)

If the scanning does not stop, press TUNING MODE 

on the remote repeatedly until “MANUAL” appears, and

then press +/– on the remote (or TUNING + or – on the

unit)  repeatedly to tune in the desired station.

Notes on listening to DAB stations

• When tuning in a DAB station, it may take a few seconds before you

hear any sound.

• Primary service is automatically received when secondary service

ends.

Playing a tape

Use buttons on the unit for the operation.

1 Select a tape function.

Press FUNCTION repeatedly (or TAPE on the

remote) .

2 Insert a tape.

Press (stop/eject)   on the unit, and insert the

tape into the cassette holder. Make sure there is no

slack in the tape to avoid damaging the tape or the

tape deck.

3 Start playback.

Press (play)  on the unit.

To Press

Pause playback  (pause)  on the unit. To

resume play, press it again.

Stop playback  (stop/eject)  on the unit.

Rewind or fast

forward*

 /  on the unit.

* Be sure to press (stop/eject)   on the unit aer the tape has

been wound or rewound to the end.

Note

Do not turn o the system during playback or recording.

Changing the display

To change Press

Information on

the display1)

DISPLAY repeatedly when the 

system is on.

Display mode

(Clock)

DISPLAY when the system is 

off2). e clock is displayed for eight

seconds.

1) For example, you can view:

– CD/MP3 disc information such as the track or le number, folder

name (during normal play), or the total play time (while the player

is stopped)

– DAB station information such as the service name, channel label,

DLS (Dynamic Label Segment), or ensemble label

2) e STANDBY indicator lights up when the system is turned o.

Notes on the display information

• e following are not displayed correctly;

– total playing time for a disc with MP3 les.

– elapsed playing time and remaining time of an MP3 le encoded

using a VBR (variable bit rate) when the le is played or is shied

with fast forward or fast reverse.

– folder and le names that do not follow either the ISO9660 Level 1

or 2 standard.

• e following are displayed;

– ID3 tag information for MP3 les when ID3 version 1 and version

2 tags are used.

– up to 15 characters of ID3 tag information using uppercase letters

(A to Z), numbers (0 to 9), and symbols (" $ % ’ ( ) + , – . / < = > *

@ [ \ ] _ ` { | } ! ? ^).

– up to 8 characters of service name, up to 128 characters of DLS

(Dynamic Label Segment) and up to 16 characters of ensemble

label using uppercase letters (A to Z), numbers (0 to 9), and

symbols (" $ % ’ ( ) + , – . / < = > @ [ \ ] _ ` { | } ! ? ^).*

Using optional audio components

To connect an optional headphones

Connect headphones to the PHONES jack  on the

unit.

To connect an optional component

Connect additional audio source component to the

AUDIO IN jack  on the unit using an audio analog

cord (not supplied). Turn down the volume on the

system, and then select the AUDIO IN function.

Produkt Specifikationer

Mærke:	Sony
Kategori:	Hi-Fi system
Model:	CMT-EH20DAB
RDS Tuner inkluderet:	Ja
CD-R-afspilning:	Ja
CD-RW-afspilning:	Ja
Mikrofonindgang:	Ingen
Bas indstillinger:	Ja
Diskant indstillinger:	Ingen
CD-tekst:	Ingen
Kassettebåndoptager:	Ja
Karaoke:	Ingen
Optisk diskafspiller:	Ja
Højttaler bredde:	145 mm
Højttaler dybde:	134 mm
Højttaler højde:	241.5 mm