Sony Vaio VGN-P25G Manual
Læs nedenfor 📖 manual på dansk for Sony Vaio VGN-P25G (155 sider) i kategorien Laptop. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/155
N
Operating Instructions - Hardware Guide
Personal Computer
VGN-P Series
2
n N
Contents
Before Use.......................................................................... 4
Finding More about Your VAIO Computer .................... 5
Ergonomic Considerations ............................................ 7
Getting Started.................................................................... 9
Locating Controls and Ports........................................ 10
About the Indicator Lights ........................................... 15
Connecting a Power Source ....................................... 16
Using the Battery Pack................................................ 17
Shutting Down Your Computer Safely ........................ 24
Updating Your Computer ............................................ 25
Using Your VAIO Computer.............................................. 26
Using the Keyboard..................................................... 27
Using the Pointing Device ........................................... 29
Using Special-function Buttons ................................... 31
Using the Instant Mode ............................................... 32
Using the Built-in Camera ........................................... 33
Using the Memory Stick .............................................. 34
Using Other Modules / Memory Cards........................ 39
Using the Internet........................................................ 43
Using the Network (LAN) ............................................ 44
Using the Wireless LAN .............................................. 46
Using the Bluetooth Function ...................................... 53
Using Peripheral Devices..................................................58
Using the Noise Canceling Headphones.....................59
Connecting a Display/LAN Adapter .............................65
Connecting an Optical Disc Drive ................................67
Connecting External Speakers or Headphones ..........69
Connecting an External Display ..................................70
Selecting Display Modes .............................................72
Using the Multiple Monitors Function ..........................74
Connecting a USB Device ...........................................77
Customizing Your VAIO Computer....................................79
Setting the Password...................................................80
Using the VAIO Control Center ...................................90
Using the Power Saving Modes ..................................91
Using the VAIO Power Management...........................96
Protecting the Hard Disk..............................................98
3
n N
Precautions....................................................................... 99
Handling the LCD Screen ......................................... 100
Using the Power Source ........................................... 101
Handling Your Computer........................................... 102
Handling the Built-in Camera .................................... 105
Handling Discs .......................................................... 106
Using the Battery Pack.............................................. 107
Using Headphones.................................................... 108
Handling the Memory Stick ....................................... 109
Handling the Built-in Storage Device ........................ 110
Handling the Display/LAN Adapter............................ 111
Troubleshooting .............................................................. 112
Computer .................................................................. 114
System Security ........................................................ 123
Battery....................................................................... 124
Instant Mode ............................................................. 126
Built-in Camera ......................................................... 128
Networking ................................................................ 130
Bluetooth Technology ............................................... 135
Display ...................................................................... 139
Printing ...................................................................... 142
Microphone ............................................................... 143
Speakers ................................................................... 144
Pointing Device ......................................................... 145
Keyboard ...................................................................146
Floppy Disks ..............................................................147
Audio/Video ...............................................................148
Memory Cards ...........................................................150
Peripherals ................................................................151
Trademarks .....................................................................152
Notice ..............................................................................154
4
n N
Before Use >
Before Use
Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has
combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal
computing experience.
!
External views illustrated in this manual may look slightly different from those of your computer.
How to find specifications
Some features, options, and supplied items may not be available on your computer.
To find out about the configuration of your computer, see the Specifications (supplied with your computer).
5
n N
Before Use >
Finding More about Your VAIO Computer
Finding More about Your VAIO Computer
This section provides support information about your VAIO computer.
1. Printed Documentation
❑Quick Start Guide — An overview of components connection, set-up information, etc.
❑Specifications — The hardware configurations of your VAIO computer.
❑Troubleshooting and Recovery Guide
❑Safety Regulations
2. On-screen Documentation
❑VAIO Manual — General information and technical assistance for your VAIO computer.
To access VAIO Manual VAIO Manual, double-click on the desktop.
❑Windows Help and Support — A comprehensive resource for practical advice, tutorials, and demonstrations to help you
learn to use your computer.
To access Windows Help and Support, click Start and Help and Support, or press and hold the Microsoft Windows
key and press the F1 key.
6
n N
Before Use >
Finding More about Your VAIO Computer
3. Support Web Sites
If you have any problem with the computer, you can visit the following VAIO online web sites for troubleshooting:
❑http://www.sony-asia.com/support/vaio/ (English)
❑http://scs.sony.co.kr/ (Korean)
❑http://service.sony.com.tw/ (Traditional Chinese)
Before contacting VAIO Helpdesk by telephone, try to solve the problem by reading the supplied documentation and visiting
other Sony web sites.
❑For other Sony products, visit the web site at http://www.sony.net .
❑For available optional accessories, visit the following web sites:
❑http://vaio-online.sony.com/ (English)
❑http://vaio-online.sony.co.kr/ (Korean)
❑http://www.sonystyle.com.tw/vaio/ (Traditional Chinese)
7
n N
Before Use >
Ergonomic Considerations
Ergonomic Considerations
You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt
to take account of the following ergonomic considerations for both stationary and portable environments:
❑Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your
wrists in a neutral, comfortable position (3) while using the keyboard or the pointing device. Let your upper arms hang
naturally at your sides. Take frequent breaks while using your computer. Excessive use of the computer may strain eyes,
muscles, or tendons.
❑Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the
floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning
far backwards.
8
n N
Before Use >
Ergonomic Considerations
❑Viewing angle of the computer's display – Use the display's tilting feature to find the best position. You can reduce eye
strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness level of the display
as well.
❑Lighting – Choose a location where windows and lights do not cause glare and reflection on the display. Use indirect
lighting to avoid bright spots on the display. Proper lighting adds to your comfort and work efficiency.
❑Positioning an external display – When using an external display, set the display at a comfortable viewing distance.
Make sure the display screen is at eye level or slightly lower when you are sitting in front of the monitor.
9
n N
Getting Started >
Getting Started
This section describes how to get started using your VAIO computer.
❑Locating Controls and Ports (page 10)
❑About the Indicator Lights (page 15)
❑Connecting a Power Source (page 16)
❑Using the Battery Pack (page 17)
❑Shutting Down Your Computer Safely (page 24)
❑Updating Your Computer (page 25)
10
n N
Getting Started >
Locating Controls and Ports
Locating Controls and Ports
Take a moment to identify the controls and ports shown on the following pages.
Front
AWIRELESS switch (page 46), (page 53)
BWIRELESS indicator (page 15)
CSD memory card slot (page 39)
DMedia Access indicator (page 15)
EMemory Stick slot* (page 34)
FBuilt-in MOTION EYE camera indicator (page 15)
GBuilt-in MOTION EYE camera (page 33)
HLCD screen (page 100)
IBuilt-in microphone (monaural)
JKeyboard (page 27)
KPower switch
LPower indicator (page 15)
MCharge indicator (page 15)
NDisc drive indicator (page 15)
* Your computer supports only the Duo-size Memory Stick.
11
n N
Getting Started >
Locating Controls and Ports
ABuilt-in speakers (stereo)
BPointing stick (page 29)
CLeft button (page 29)
DCenter button (page 29)
ERight button (page 29)
FWindow arrangement button (S2 button) (page 31)
GXMB (Xross Media Bar) button (S1 button) (page 31)
HNum lock indicator (page 15)
ICaps lock indicator (page 15)
JScroll lock indicator (page 15)
12
n N
Getting Started >
Locating Controls and Ports
Back
ABattery connector (page 17)
13
n N
Getting Started >
Locating Controls and Ports
Right
AHi-Speed USB (USB 2.0) port* (page 77)
BI/O port (page 66)
* Supports high-/full-/low- speeds.
14
n N
Getting Started >
Locating Controls and Ports
Left
ADC IN port (page 16)
BHi-Speed USB (USB 2.0) port* (page 77)
CHeadphones jack (page 59), (page 69)
* Supports high-/full-/low- speeds.
15
n N
Getting Started >
About the Indicator Lights
About the Indicator Lights
Your computer is equipped with the following indicator lights:
Indicator Functions
Power 1Illuminates in green when the computer is on, blinks slowly in orange while the computer is in Sleep mode, and
turns off when the computer is off or in Hibernate mode.
Charge Illuminates while the battery pack is charging. See Charging the Battery Pack (page 19) for more information.
Built-in MOTION EYE camera Illuminates while the built-in camera is in use.
Media Access Illuminates while data is being read from or written to a memory card, such as the Memory Stick and the SD
memory card. (Do not place the computer into Sleep mode or turn it off when this indicator is lit.) When the
indicator is unlit, the memory card is not in use.
Disc drive Illuminates while the built-in storage device is running to read or write data.
Do not place the computer into Sleep mode or turn it off when this indicator is lit.
Num lock Press the Fn+Num Lk keys to activate the numeric keypad. Press it a second time to deactivate the numeric
keypad. The numeric keypad is not active when the indicator is unlit.
Caps lock Press the Caps Lock key to type letters in uppercase. Letters appear in lowercase if you press the Shift key
while the indicator is lit. Press the key a second time to turn off the indicator. Normal typing resumes when the
Caps lock indicator is unlit.
Scroll lock Press the Fn+Scr Lk keys to change how you scroll the display. Normal scrolling resumes when the Scroll lock
indicator is unlit. The Scr Lk key functions differently depending on the program you are using and does not
work with all programs.
WIRELESS Illuminates when one or more wireless options are enabled.
16
n N
Getting Started >
Connecting a Power Source
Connecting a Power Source
You can use either an AC adapter or a rechargeable battery pack for supplying power to your computer.
Using the AC Adapter
✍
Use only the supplied AC adapter for your computer.
To use the AC adapter
1Plug one end of the power cord (1) into the AC adapter (3).
2Plug the other end of the power cord into an AC outlet (2).
3Plug the cable connected to the AC adapter (3) into the DC IN port (4) on the computer.
✍
To disconnect your computer completely from AC power, unplug the AC adapter.
Make sure that the AC outlet is easily accessible.
If you do not intend to use your computer for a long period of time, place the computer into Hibernate mode. See Using Hibernate Mode (page 94).
17
n N
Getting Started >
Using the Battery Pack
Using the Battery Pack
The battery pack supplied with your computer is not fully charged at the time of delivery.
Installing the Battery Pack
To install the battery pack
1Turn off the computer and close the LCD screen lid.
2Slide the battery LOCK switch (1) inward.
18
n N
Getting Started >
Using the Battery Pack
3Fit the battery pack into the battery compartment.
The battery pack should be level with the bottom of the computer.
4Slide the battery pack toward the front of the computer until it clicks into place.
5Slide the battery LOCK switch outward to secure the battery pack on the computer.
✍
When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.
!
For your safety, it is highly recommended that you use genuine Sony rechargeable battery packs and AC adapters that meet the quality assurance
standards and supplied by Sony for your VAIO computer. Some VAIO computers may operate only with genuine Sony battery packs.
19
n N
Getting Started >
Using the Battery Pack
Charging the Battery Pack
The battery pack supplied with your computer is not fully charged at the time of delivery.
To charge the battery pack
1Install the battery pack.
2Connect the computer to a power source with the AC adapter.
The charge indicator light turns on while the battery pack is charging. When the battery pack charges close to the
maximum charge level you selected with the battery charge functions, the charge indicator turns off. To select your desired
maximum charge level, see Using the Battery Charge Functions (page 21).
!
Charge the battery pack as described in this manual from your first battery charge.
Charge indicator status Meaning
Lit in orange The battery pack is charging.
Blinks along with the green power
indicator
The battery pack is running out of power. (Normal
mode)
Blinks along with the orange power
indicator
The battery pack is running out of power. (Sleep mode)
Blinks fast in orange A battery error has occurred due to a failed battery
pack or an unlocked battery pack.
20
n N
Getting Started >
Using the Battery Pack
✍
Keep the battery pack in your computer while it is directly connected to AC power. The battery pack continues to charge while you are using the
computer.
If the battery charge level falls below 10%, you should either connect the AC adapter to recharge the battery pack or shut down your computer and
install a fully charged battery pack.
Your computer is supplied with a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack does not affect
the life of battery.
While some software applications or peripheral devices are in use, your computer may not enter Hibernate mode even when the remaining battery life
is short. To avoid loss of data when using battery power, you should save your data frequently and manually activate a power management mode, such
as Sleep or Hibernate.
If the battery pack wears out when the computer enters Sleep mode, you will lose all unsaved data. Going back to the previous work state is impossible.
To avoid loss of data, you should save your data frequently.
When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.
21
n N
Getting Started >
Using the Battery Pack
Using the Battery Charge Functions
You can customize the current battery charging method using the Battery Charge Functions: the battery care function and
the quick charge function. The battery care function makes the life of battery longer, and the quick charge function allows you
to charge your battery pack quickly.
✍
The quick charge function is intended to speed up battery charging while your computer is in Sleep or Hibernate mode or off. It does not reduce the
battery charge time while the computer is in Normal mode.
To enable the battery care function and the quick charge function
1Click Start, All Programs, and VAIO Control Center.
2Click Power Management and then Battery Charge Functions.
3Click to select the Enable Quick Charge Function check box in the right pane and click Apply.
4Click Advanced.
5Click to select the Enable Battery Care Function check box.
6Select the desired maximum charge level.
7Click OK.
To check the battery charge capacity
Follow steps 1 and 2 in To enable the battery care function and the quick charge function above, click Advanced, and
check detailed information. If the battery charge capacity is low, replace the battery pack with a new genuine Sony battery
pack.
22
n N
Getting Started >
Using the Battery Pack
Using the Battery Life Conserving Wallpaper
You can conserve your battery life just by setting the specific wallpaper as your desktop background.
To set the battery life conserving wallpaper
1Click Start, All Programs, and VAIO Control Center.
2 DisplayClick and then Long Battery Life Wallpaper Setting.
3Click Set Long Battery Life Wallpaper.
At the confirmation prompt, click OK.
23
n N
Getting Started >
Using the Battery Pack
Removing the Battery Pack
!
You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack
while the computer is in Sleep mode.
To remove the battery pack
1Turn off the computer and close the LCD screen lid.
2Slide the battery LOCK switch (1) inward.
3Slide and hold the battery RELEASE latch (2) inward and slightly slide the battery pack toward the back of the computer.
4 Lift the back edge of the battery pack to take it out of the battery compartment.
24
n N
Getting Started >
Shutting Down Your Computer Safely
Shutting Down Your Computer Safely
To avoid losing unsaved data, be sure to shut down your computer properly, as described below.
To shut down your computer
1Turn off any peripherals connected to the computer.
2Click Start, the arrow next to the Lock button, and then Shut Down.
3Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off
automatically.
The power indicator light turns off.
25
n N
Getting Started >
Updating Your Computer
Updating Your Computer
Be sure to install the latest updates on your computer with the following software applications so that the computer can run
more efficiently.
❑Windows Update
Click Start, All Programs, and Windows Update and then follow the on-screen instructions.
❑VAIO Update 4
Click Start, All Programs, VAIO Update 4, and VAIO Update Options and then follow the on-screen instructions.
!
Your computer must be connected to the Internet to download the updates.
26
n N
Using Your VAIO Computer >
Using Your VAIO Computer
This section describes how to get the most out of using your VAIO computer.
❑Using the Keyboard (page 27)
❑Using the Pointing Device (page 29)
❑Using Special-function Buttons (page 31)
❑Using the Instant Mode (page 32)
❑Using the Built-in Camera (page 33)
❑Using the Memory Stick (page 34)
❑Using Other Modules / Memory Cards (page 39)
❑Using the Internet (page 43)
❑Using the Network (LAN) (page 44)
❑Using the Wireless LAN (page 46)
❑Using the Bluetooth Function (page 53)
27
n N
Using Your VAIO Computer >
Using the Keyboard
Using the Keyboard
Your keyboard has additional keys that perform model-specific tasks.
Combinations and Functions with the Fn Key
✍
Some keyboard functions can be used only after the operating system is finished launching.
Combinations/Feature Functions
Fn + % (F2): speaker switch Turns on and off the built-in speakers and the headphones.
Fn + 2 (F3/F4): volume Changes the volume level.
To increase the volume, keep pressing the Fn F4+ keys or press the Fn+F4 keys and then the
M , or key.
To decrease the volume, keep pressing the Fn+F3 keys or press the Fn F3+ keys and then the
m < or key.
Fn + 8 (F5/F6): brightness control Changes the LCD brightness of your computer screen.
To increase lighting intensity, keep pressing the Fn F6+ keys or press the Fn+F6 keys and then
the M or , key.
To decrease lighting intensity, keep pressing the Fn+F5 keys or press the Fn+F5 keys and then
the m or < key.
Fn + /T (F7): display output Toggles among your computer screen, an external display, and simultaneous output to both.
Fn + / (F9/F10): zoom Changes the size of an image or a document displayed on some software.
To make the view look smaller and further away (zoom out), press the Fn+F9 keys.
To make the view look bigger and closer (zoom in), press the Fn+F10 keys.
See the help file included with the VAIO Control Center for more information.
28
n N
Using Your VAIO Computer >
Using the Keyboard
Fn + (F12): hibernate Provides the lowest level of power consumption. When you execute this command, the states
of the system and the connected peripheral devices are saved to the built-in storage device and
the system power is turned off. To return the system to its original state, use the power switch
to turn on the power.
For details on power management, see Using the Power Saving Modes (page 91).
Combinations/Feature Functions
29
n N
Using Your VAIO Computer >
Using the Pointing Device
Using the Pointing Device
The keyboard contains a cursor-pointing device, the pointing stick (1). You can point to, select, drag, and scroll objects on
the screen using the pointing stick in combination with the buttons located below the space bar.
The pointer (2) moves in the direction that you push the pointing stick. The stronger you push the pointing stick, the faster
moves the pointer.
30
n N
Using Your VAIO Computer >
Using the Pointing Device
✍
The pointer may move on its own on rare occasions, which does not indicate a malfunction. Leave the pointing stick untouched for a while. The pointer
will behave normally.
The tip on the pointing stick is a consumable. You can replace it with one of the supplied spare caps when necessary.
You can disable/enable the pointing stick while a mouse is connected to your computer. To change the pointing stick settings, use the VAIO Control
Center.
!
Be sure to connect a mouse before disabling the pointing stick. If you disable the pointing stick before connecting a mouse, you will be able to use only
the keyboard for pointer operations.
Action Description
Point Push the pointing stick to place the pointer on an item or object.
Click Press the left button (3) or tap on the pointing stick once.
Double-click Press the left button or tap on the pointing stick twice in a row.
Right-click Press the right button (5) once. In many applications, this action displays a shortcut menu.
Drag Push the pointing stick in your desired direction while pressing the left button. Alternatively, you can tap on the pointing
stick twice in a row and, without taking your finger off the pointing stick on the second tap, push it in your desired
direction. To drop the dragging object, take your finger off the pointing stick.
Scroll Push the pointing stick up and down or sideways while pressing the center button (4). (The scroll function is available
only with applications that support a pointing stick scroll feature.)
31
n N
Using Your VAIO Computer >
Using Special-function Buttons
Using Special-function Buttons
Your computer is equipped with special buttons to help you use specific functions of the computer.
Special-function button Functions
XMB (Xross Media Bar) button
(S1 button)
While the computer is off or in Hibernate mode, the XMB button starts the Instant Mode. See Using the
Instant Mode (page 32) for more information on the Instant Mode.
While the computer is in Normal mode, this S1 button executes the default task. You can change the default
assignment with the VAIO Control Center.
Window arrangement button
(S2 button)
By default, the window arrangement button (S2 button) shows all open windows by resizing the windows so
that they all fit on the desktop. To resume the previous window state, press this button once again.
32
n N
Using Your VAIO Computer >
Using the Instant Mode
Using the Instant Mode
The Instant Mode enables you immediately to play music and videos or access the Internet without launching the Windows
operating system. For detailed information on operating instructions, see the help file included with the Instant Mode.
Starting the Instant Mode
To start the Instant Mode, your computer must be off or in Hibernate mode.
To start the Instant Mode
1 Press the XMB button on the computer.
The Main Menu of the Instant Mode appears on the screen.
2 Select your desired operation from the menu.
Exiting the Instant Mode
Select Power Off from the Main Menu to exit the Instant Mode.
Sharing Bookmarks between the Instant Mode and the Internet Explorer
You can export/import your Favorites file used with the Internet Explorer to the bookmark files of the browser used with the
Instant Mode.
To share bookmarks
1 Click Start, All Programs, and VAIO Control Center.
2 Click Instant Mode and then Bookmark Settings.
3 Follow the on-screen instructions.
33
n N
Using Your VAIO Computer >
Using the Built-in Camera
Using the Built-in Camera
Your computer is equipped with a built-in MOTION EYE camera.
With the preinstalled image capture software, you can perform the following operations:
❑Capturing still images and movies
❑Sensing and capturing object movements for monitoring purposes
❑Editing captured data
✍
Turning on the computer activates the built-in camera.
Video conference is possible with the appropriate software.
!
Launching or exiting your instant messaging or video editing software does not activate or deactivate the built-in camera.
Do not place your computer into Sleep or Hibernate mode while you are using the built-in camera.
You cannot operate the built-in camera with the Microsoft Windows Movie Maker software.
To use the preinstalled image capture software
1 Click Start, All Programs, ArcSoft WebCam Companion 2, and WebCam Companion 2.
2 Click the desired icon in the main window.
For detailed information on how to use the software, see the help file included with the software.
✍
When capturing an image or a movie in a dark place, click the Capture icon or the Record icon in the main window, and then click the WebCam Settings
icon and select the low light or low light compensation option in the properties window.
34
n N
Using Your VAIO Computer >
Using the Memory Stick
Using the Memory Stick
The Memory Stick is a compact, portable, and versatile IC recording media especially designed for exchanging and sharing
digital data with compatible products, such as digital cameras, mobile phones, and other devices. Because it is removable,
it can be used for external data storage.
Before You Use the Memory Stick
The Memory Stick slot on your computer can accommodate Duo-size media and supports Memory Stick PRO Duo and
Memory Stick PRO-HG Duo with high-speed data transfer and large data capacity capabilities.
For the latest information about the Memory Stick, visit the Memory Stick web site at http://www.memorystick.com/en/ .
35
n N
Using Your VAIO Computer >
Using the Memory Stick
Inserting and Removing a Memory Stick
To insert a Memory Stick
!
Your computer is supplied with a slot protector in the Memory Stick slot. Remove the slot protector before you use the slot.
1 Locate the Memory Stick slot.
2 Push the Memory Stick slot protector so that the protector pops out.
3 Gently take hold of the Memory Stick slot protector and pull it out of the slot.
4 Hold the Memory Stick with the arrow facing upward and pointing toward the slot.
5 Carefully slide the Memory Stick into the slot until it clicks into place.
✍
The Memory Stick is automatically detected by your system and the contents on the Memory Stick are displayed. If nothing appears on the desktop,
click Start, Computer, and double-click the Memory Stick icon.
36
n N
Using Your VAIO Computer >
Using the Memory Stick
!
Be sure to hold the Memory Stick with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer or the
media, do not force the Memory Stick into the slot if you cannot insert it smoothly.
Before using a Memory Stick Micro (M2), be sure to insert it into an M2 Duo adaptor. If you insert the media directly into the Memory Stick slot without
the adaptor, you may not be able to remove it from the slot.
To remove a Memory Stick
!
Do not remove the Memory Stick while the Media Access indicator light is lit. If you do, you may lose data. Large volumes of data may take time to
load, so make sure the indicator is unlit before removing the Memory Stick.
Insert the Memory Stick slot protector to block any particles from entering the slot when not using the Memory Stick. Before moving your computer,
be sure to insert the Memory Stick slot protector into the slot.
1 Check that the Media Access indicator light is unlit.
2 Push in the Memory Stick toward the computer and release.
The Memory Stick ejects.
3 Pull the Memory Stick out of the slot.
!
Always remove the Memory Stick gently, or it may pop out unexpectedly.
37
n N
Using Your VAIO Computer >
Using the Memory Stick
Formatting a Memory Stick
To format a Memory Stick
The Memory Stick has been formatted in the factory default setting and is ready for use.
If you want to reformat the media with your computer, follow these steps.
!
Be sure to use the device that is designed to format the media and supports the Memory Stick when formatting the media.
Formatting the Memory Stick erases the entire data on the media. Before formatting the media, make sure that it does not contain your valuable data.
Do not remove the Memory Stick from the slot while formatting. This could cause a malfunction.
1Carefully slide the Memory Stick into the slot until it clicks into place.
2Click Start and Computer to open the Computer window.
3Right-click the Memory Stick icon and select Format.
4Click Restore device defaults.
!
The size of the allocation unit and file system may change.
Do not select NTFS from the File system drop-down list as it may cause a malfunction.
✍
The formatting process will be completed more quickly if you select Quick Format in Format options.
5Click Start.
6Follow the on-screen instructions.
!
It may take time to format the Memory Stick depending on the media type.
38
n N
Using Your VAIO Computer >
Using the Memory Stick
Notes on Using the Memory Stick
❑Your computer has been tested and found compatible with Sony branded Memory Stick with capacity of up to 16 GB that
are available as of January 2009. However, not all the Memory Stick that meet the same specifications as the compatible
media are guaranteed of compatibility.
❑Inserting a Memory Stick with multiple conversion adaptors is not guaranteed of compatibility.
❑MagicGate is the general name of the copyright protection technology developed by Sony. Use a Memory Stick with the
MagicGate logo to use this feature.
❑Except for your personal use, it is against the copyright law to use any audio and/or image data you recorded without prior
consent from the respective copyright holders. Accordingly, the Memory Stick with such copyrighted data can be used
only within the law.
❑Do not insert more than one Memory Stick into the slot. Improper insertion of the media may damage both your computer
and the media.
39
n N
Using Your VAIO Computer >
Using Other Modules / Memory Cards
Using Other Modules / Memory Cards
Using the SD Memory Card
Your computer is equipped with an SD memory card slot. You can use this slot to transfer data among digital cameras,
camcorders, music players, and other audio/video devices.
Before you use the SD memory card
The SD memory card slot on your computer supports the following memory cards:
❑SD memory card
❑SDHC memory card
❑MultiMediaCard (MMC)
For the latest information on compatible memory cards, see Finding More about Your VAIO Computer (page 5) to visit the
appropriate support web site.
40
n N
Using Your VAIO Computer >
Using Other Modules / Memory Cards
To insert an SD memory card
!
Your computer is supplied with a slot protector in the SD memory card slot. Remove the slot protector before you use the slot.
1 Locate the SD memory card slot.
2 Push the SD memory card slot protector so that the protector pops out.
3 Gently take hold of the SD memory card slot protector and pull it out of the slot.
4 Hold the SD memory card with the arrow facing upward and pointing toward the slot.
5 Carefully slide the SD memory card into the slot until it clicks into place.
Do not force the card into the slot.
✍
If the SD memory card does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.
41
n N
Using Your VAIO Computer >
Using Other Modules / Memory Cards
To remove an SD memory card
!
Insert the SD memory card slot protector to block any particles from entering the slot when not using the SD memory card. Before moving your
computer, be sure to insert the memory card slot protector into the slot.SD
1 Check that the Media Access indicator light is unlit.
2 Push in the SD memory card toward the computer and release.
The SD memory card ejects.
3 Pull the SD memory card out of the slot.
42
n N
Using Your VAIO Computer >
Using Other Modules / Memory Cards
Notes on Using Memory Cards
General notes on using the memory card
❑Be sure to use memory cards that are compliant with the standards supported by your computer.
❑Be sure to hold the memory card with the arrow pointing in the correct direction as you insert it into the slot. To avoid
damaging your computer or the media, do not force the memory card into the slot if you cannot insert it smoothly.
❑Use care when inserting or removing the memory card from the slot. Do not force it in or out of the slot.
❑Do not remove the memory card while the media access indicator light is lit. If you do, you may lose data.
❑Do not attempt to insert an memory card or memory card adaptor of a different type into the memory card slot. An
incompatible memory card or memory card adaptor may cause difficulty in removing from the slot and can cause damage
to your computer.
Notes on using the SD memory card
❑Your computer has been tested and found compatible only with major memory cards available as of January 2009.
However, not all memory cards that meet the same specifications as the compatible media are guaranteed of
compatibility.
❑SD memory cards with capacity of up to 2 GB and SDHC memory cards with capacity of up to 32 GB have been tested
and found compatible with your computer.
❑The SD memory card slot on your computer does not support the high-speed data transfer feature of the SD memory
card and the SDHC memory card.
43
n N
Using Your VAIO Computer >
Using the Internet
Using the Internet
Before using the Internet, you need to sign up with an Internet Service Provider (ISP) and set up devices required for
connecting your computer to the Internet.
The following types of Internet connection services may be available from your ISP:
❑Fiber to the Home (FTTH)
❑Digital Subscriber Line (DSL)
❑Cable modem
❑Satellite
❑Dial-up
For detailed information on devices required for the Internet and how to connect your computer to the Internet, ask your ISP.
✍
To connect your computer to the Internet using the wireless LAN function, you need to set up the wireless LAN network. See Using the Wireless LAN
(page 46) for more information.
!
When you connect your computer to the Internet, be sure to take appropriate security measures to protect the computer against online threats.
Depending on the service contract with your ISP, you may need to connect an external modem device, for example a USB telephone modem, a DSL
modem, or a cable modem, to your computer to connect to the Internet. For the detailed instructions on connection setups and modem configuration,
see the manual that came with your modem.
44
n N
Using Your VAIO Computer >
Using the Network (LAN)
Using the Network (LAN)
You need the display/LAN adapter to connect your computer to 1000BASE-T/100BASE-TX/10BASE-T type networks with an
Ethernet network cable. Connect one end of a network cable (not supplied) to the network (Ethernet) port on the display/LAN
adapter and the other end to your network. For detailed settings and devices needed to connect to the network, ask your
network administrator.
!
You cannot configure your network before connecting the display/LAN adapter to your computer. See Connecting a Display/LAN Adapter (page 65)
for more information on the display/LAN adapter.
✍
Your computer can be connected to the network with the default settings.
45
n N
Using Your VAIO Computer >
Using the Network (LAN)
!
Do not plug a telephone cable into the network (Ethernet) port on the display/LAN adapter.
If the network (Ethernet) port is connected to one of the telephone lines mentioned below, high electric current to the port may cause damage,
overheating, or fire.
- Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone)
- Public telephone subscriber line
- Private branch exchange (PBX)
46
n N
Using Your VAIO Computer >
Using the Wireless LAN
Using the Wireless LAN
Using the Wireless LAN (WLAN), all your digital devices with the built-in WLAN function communicate freely with each other
through a network. A WLAN is a network in which a user can connect to a Local Area Network (LAN) through a wireless (radio)
connection.
The WLAN supports all normal Ethernet connectivity, but with the added benefits of mobility and roaming. You can still access
information, Internet/intranet and network resources, even in the middle of a meeting, or as you move from one place to
another.
You can communicate without an access point, which means that you can communicate with a limited number of computers
(ad-hoc). Or you can communicate through an access point, which allows you to create a full infrastructure network.
✍
In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the
WLAN function, read the Safety Regulations carefully.
WLAN uses the IEEE 802.11a
*/b/g standard or the IEEE 802.11n
* draft standard, which specifies the type of technology used. The standard includes
the encryption methods: Wired Equivalent Privacy (WEP), which is a security protocol, Wi-Fi Protected Access 2 (WPA2), and Wi-Fi Protected Access
(WPA). Proposed jointly by the IEEE and Wi-Fi Alliance, both WPA2 and WPA are specifications of standards based on interoperable security
enhancements that increase the level of data protection and access control for existing Wi-Fi networks. WPA is designed to be forward compatible with
the IEEE 802.11i specification. It utilizes the enhanced data encryption Temporal Key Integrity Protocol (TKIP) in addition to user authentication using
802.1X and Extensible Authentication Protocol (EAP). Data encryption protects the vulnerable wireless link between clients and access points. Besides
that, there are other typical LAN security mechanisms to ensure privacy, such as: password protection, end-to-end encryption, virtual private networks,
and authentication. WPA2, the second generation of WPA, provides stronger data protection and network access control and is also designed to secure
all versions of 802.11 devices, including 802.11b, 802.11a, 802.11g, and 802.11n draft standard, multi-band and multi-mode. In addition, based on
the ratified IEEE 802.11i standard, WPA2 provides government grade security by implementing the National Institute of Standards and Technology
(NIST) FIPS 140-2 compliant AES encryption algorithm and 802.1X-based authentication. WPA2 is backward compatible with WPA.
* See the specifications to find out about the configuration of your computer.
The IEEE 802.11b/g standard is a wireless LAN standard, using the 2.4 GHz band. The IEEE 802.11g standard provides higher-speed communications
than the IEEE 802.11b standard.
47
n N
Using Your VAIO Computer >
Using the Wireless LAN
The IEEE 802.11a standard is a wireless LAN standard, using the 5 GHz band.
The IEEE 802.11n draft standard is a wireless LAN standard, using the 2.4 GHz or 5 GHz band.
Wireless LAN devices using the 2.4 GHz band cannot communicate with devices using the 5 GHz band because the frequencies are different.
The 2.4 GHz band used by wireless LAN compatible devices is also used by other various devices. Although technologies to minimize interference from
other devices that use the same band are employed on wireless LAN compatible devices, such interference may cause lower communication speed,
narrower communication range, or broken wireless connections.
The communication speed varies depending on the distance between communication devices, existence of obstacles between such devices, the device
configuration, the radio conditions, and the software in use. In addition, communications may be cut off depending on the radio conditions.
The communication range varies depending on the actual distance between communication devices, existence of obstacles between such devices, the
radio conditions, the ambient environment that includes existence of walls and materials of such walls, and the software in use.
Actual communication speed may not be as fast as the one displayed on your computer.
Deploying IEEE 802.11b and IEEE 802.11g products on the same wireless network may reduce the communication speed due to radio interference.
Taking this into consideration, the IEEE 802.11g products are designed to reduce the communication speed to ensure communications with
IEEE 802.11b products. When the communication speed is not as fast as expected, changing the wireless channel on the access point may increase
the communication speed.
48
n N
Using Your VAIO Computer >
Using the Wireless LAN
Communicating without an Access Point (Ad-hoc)
An ad-hoc network is a network in which a LAN is created only by wireless devices themselves, with no other central controller
or access point. Each device communicates directly with other devices in the network. You can set up an ad-hoc network
easily at home.
49
n N
Using Your VAIO Computer >
Using the Wireless LAN
To communicate without an access point (ad-hoc)
!
The IEEE 802.11a standard, using the 5 GHz band, and the IEEE 802.11n draft standard, using the 2.4 GHz or 5 GHz band, are not available on ad-hoc
networks.
1 Turn on the WIRELESS switch.
2 Click the button next to or above your desired wireless option(s) in the VAIO Smart Network window.
Make sure the WIRELESS indicator light turns on.
3 Click Start and Control Panel.
4 Click View network status and tasks under Network and Internet.
5 Click Set up a connection or network in the left pane.
The Set up a connection or network window appears.
6 Select an option to specify the ad-hoc network settings and click Next.
7 Follow the on-screen instructions.
50
n N
Using Your VAIO Computer >
Using the Wireless LAN
Communicating with an Access Point (Infrastructure)
An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access
point (not supplied). The access point bridges the wireless and wired LAN and acts as a central controller for the wireless
LAN network. The access point coordinates transmission and reception from multiple wireless devices within a specific range.
The access point will select which channel to use on an infrastructure network.
!
For details on how to select the channel that will be used by the access point, see the manual that came with your access point.
51
n N
Using Your VAIO Computer >
Using the Wireless LAN
To connect to a wireless network
1 Make sure an access point is set up.
See the manual that came with your access point for more information.
2 Turn on the WIRELESS switch.
3 Click the button next to or above your desired wireless option(s) in the VAIO Smart Network window.
Make sure the WIRELESS indicator light turns on.
!
Wireless LAN communication (IEEE 802.11a standard) using only the 5 GHz band, available on selected models only, is disabled by default. To enable
5 GHz band communication, you need to select the option to use the 5 GHz band or both the 2.4 GHz and 5 GHz bands on the WLAN tab in the VAIO
Smart Network settings window.
4 Right-click or on the taskbar and select Connect to a network.
5 Select the desired access point and click Connect.
✍
For WPA-PSK or WPA2-PSK authentication, you must enter a passphrase. The passphrase is case sensitive and must be a text string between 8 and
63 characters in length or a hexadecimal string of 64 characters.
52
n N
Using Your VAIO Computer >
Using the Wireless LAN
Stopping Wireless LAN Communications
To stop wireless LAN communications
Click the button next to or above the WLAN icon in the VAIO Smart Network window.
!
Turning off the wireless LAN function while accessing remote documents, files, or resources may result in data loss.
53
n N
Using Your VAIO Computer >
Using the Bluetooth Function
Using the Bluetooth Function
You can establish wireless communications between your computer and other Bluetooth ® devices such as another computer
or a mobile phone. You can transfer data between these devices without cables at a range of up to 10 meters in an open area.
Notes on using the Bluetooth function
❑The data transfer rate varies, depending on the following conditions:
❑Obstacles, such as walls, located between devices
❑Distance between devices
❑Material used in walls
❑Proximity to microwaves and cordless telephones
❑Radio frequency interference and other environmental conditions
❑Device configuration
❑Type of software application
❑Type of operating system
❑Use of both wireless LAN and Bluetooth functions at the same time on your computer
❑Size of file being exchanged
❑Large files may occasionally be corrupted during continuous transfer due to limitations of the Bluetooth standard and
electromagnetic interference in the environment.
❑All Bluetooth devices must be certified to make sure that the applicable standard requirements are maintained. Even if
standards are met, individual device performance, specifications, and operation procedures can vary. Data exchange may
not be possible in all situations.
54
n N
Using Your VAIO Computer >
Using the Bluetooth Function
❑Video and audio may not be synchronized if you play videos on your computer with audio output from a connected
Bluetooth device. This is a frequent occurrence with Bluetooth technology and is not a malfunction.
❑The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth
devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous
use of the Bluetooth function and wireless communication devices, however, may cause radio interference and result in
reduced communication speeds and distances than the standard values.
❑The Bluetooth function may not work with other devices, depending on the manufacturer or the software version employed
by the manufacturer.
❑Connecting multiple Bluetooth devices to your computer may cause channel congestion, resulting in poor performance
of the devices. This is normal with Bluetooth technology and is not a malfunction.
55
n N
Using Your VAIO Computer >
Using the Bluetooth Function
Bluetooth Security
The Bluetooth wireless technology has an authentication function, which allows you to determine with whom you choose to
communicate. With the authentication function, you can prevent any anonymous Bluetooth devices from accessing your
computer.
The first time two Bluetooth devices communicate, a common passkey (a password required for authentication) should be
determined for both devices to be registered. Once a device is registered, there is no need to re-enter the passkey.
✍
The passkey can be different each time, but must be the same at both ends.
For certain devices, such as a mouse, no passkey can be entered.
56
n N
Using Your VAIO Computer >
Using the Bluetooth Function
Communicating with Another Bluetooth Device
You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a
mouse, or a digital camera without the use of any cables.
To communicate with another Bluetooth device
To communicate with another Bluetooth device, you first need to set up the Bluetooth function. For setting up and using the
Bluetooth function, search for Bluetooth information using Windows Help and Support.
1 Turn on the WIRELESS switch.
2 Click the button next to or above the Bluetooth icon in the VAIO Smart Network window.
Make sure the WIRELESS indicator light turns on.
57
n N
Using Your VAIO Computer >
Using the Bluetooth Function
Stopping Bluetooth Communications
To stop Bluetooth communications
1 Turn off the Bluetooth device that is communicating with your computer.
2 Click the button next to or above the Bluetooth icon in the VAIO Smart Network window.
58
n N
Using Peripheral Devices >
Using Peripheral Devices
You can add functionality to your VAIO computer by using the various ports on the computer.
❑Using the Noise Canceling Headphones (page 59)
❑Connecting a Display/LAN Adapter (page 65)
❑Connecting an Optical Disc Drive (page 67)
❑Connecting External Speakers or Headphones (page 69)
❑Connecting an External Display (page 70)
❑Selecting Display Modes (page 72)
❑Using the Multiple Monitors Function (page 74)
❑Connecting a USB Device (page 77)
59
n N
Using Peripheral Devices >
Using the Noise Canceling Headphones
Using the Noise Canceling Headphones
A pair of noise canceling headphones may be supplied with your computer.
Features and options in this section may not be available on your computer.
See the specifications to find out about the configuration of your computer.
The noise canceling headphones are equipped with a built-in microphone that catches ambient noise and outputs an
antiphase sound to reduce the noise.
60
n N
Using Peripheral Devices >
Using the Noise Canceling Headphones
Before You Use the Noise Canceling Headphones
❑You can enable the noise canceling function only when the supplied noise canceling headphones are connected to the
headphones jack that supports this function.
❑The noise canceling function does not work on sound output with the following devices:
❑External speakers
❑Headphones without the noise canceling function
❑Sound output devices connected to your computer via a Bluetooth connection
❑The noise canceling function cannot be fully in effect unless you properly wear the headphones. Be sure to fit earpieces
of the headphones tightly into your ears.
If you feel that the noise canceling function has little effect, adjust the earbud position in the earpieces of the noise
canceling headphones or replace the earbuds with a pair in another size. A pair of medium-size earbuds is attached to
the earpieces by default and there should be an extra pair in each small and large sizes supplied with the headphones.
61
n N
Using Peripheral Devices >
Using the Noise Canceling Headphones
❑The noise canceling function is to reduce low-frequency noise in the ambient environment but not high-frequency noise.
Nor is it to implement a 100% noise-free audio environment.
❑When the noise canceling function does not seem to be working, unplug the supplied noise canceling headphones
completely and then plug them back again.
❑Keep the built-in microphone (1) of the noise canceling headphones unblocked to ensure that the noise canceling function
can be fully in effect.
❑You may hear a soft hissing noise while the noise canceling function is enabled. This is just operational noise that the
function generates and does not indicate a malfunction.
❑You may feel that the noise canceling function has little effect or ambient noise seems even louder, depending on the type
of noise or the degree of quietness in your environment. In such a case, disable the noise canceling function.
❑Use of a mobile phone may cause radio interference with the noise canceling headphones. When using the headphones,
keep mobile phones away from the headphones.
❑Plugging or unplugging the noise canceling headphones generates noise. This is normal and does not indicate a
malfunction. Be sure to take off the headphones from your ears before plugging or unplugging the headphones.
❑Enabling/disabling the noise canceling function or enabling/disabling sound with the Windows volume controls generates
noise. This is caused by switching the noise canceling circuit and does not indicate a malfunction.
❑Be sure to use the supplied noise canceling headphones. You can plug the headphones supplied with a Walkman ® to
your computer but the noise canceling function of the computer will not work well with such headphones.
62
n N
Using Peripheral Devices >
Using the Noise Canceling Headphones
Connecting the Noise Canceling Headphones
To connect the noise canceling headphones
1 Plug the headphones cable into the headphones jack i.
The icon appears on the taskbar to indicate that the noise canceling function is enabled and a balloon message
pops up from the icon.
✍
When the icon is on the taskbar, the noise canceling function is disabled. Right-click the icon and select Enable Noise Canceling Function from
the menu.
If no icon is on the taskbar, see What to do if the icon and the balloon do not appear (page 64) to change the settings.
63
n N
Using Peripheral Devices >
Using the Noise Canceling Headphones
Adjusting the Effect of the Noise Canceling Function
The noise canceling headphones supplied with your computer is configured to yield the optimum effect by default.
If you feel that the noise canceling function is not fully in effect, you may be able to adjust the effect with the Noise Canceling
Control slider on the Noise Canceling Headphones window.
To adjust the effect of the noise canceling function
1Right-click the icon on the taskbar and select Settings.
The Noise Canceling Headphones window appears.
✍
If no icon is on the taskbar, see What to do if the icon and the balloon do not appear (page 64) to change the settings.
2Drag the Noise Canceling Control slider toward Mic+ Mic- or to select your desired noise canceling level.
✍
The slider should be at the center of the range to yield the optimum level. Dragging the slider all the way to Mic+ does not bring the noise canceling
function fully into effect.
3Click Apply.
4Confirm that the noise canceling effect is satisfactory and then click OK.
64
n N
Using Peripheral Devices >
Using the Noise Canceling Headphones
What to do if the icon and the balloon do not appear
When the noise canceling function icon ( / ) is not on the taskbar and the balloon message does not pop up from
the icon, change the noise canceling function settings.
To display the balloon message and the icon
1Click Start and Control Panel.
2Click Hardware and Sound.
3Click Manage audio devices under Sound.
4On the Playback tab, double-click the speakers or headphones icon.
5Click the Enhancements tab.
6Click to select the Noise Canceling Function check box and click Modify Settings.
✍
If the Disable all enhancements check box is selected, click to cancel the check box.
7Click to select the Display an icon for the noise canceling headphones in the task tray or Display a message when
noise canceling headphones are connected check box.
8Click OK.
65
n N
Using Peripheral Devices >
Connecting a Display/LAN Adapter
Connecting a Display/LAN Adapter
A display/LAN adapter may be supplied with your computer to expand connectivity.
Features and options in this section may not be available on your computer.
See the specifications to find out about the configuration of your computer.
Locating Ports on the Display/LAN Adapter
AMonitor port (page 70)
BNetwork (Ethernet) port (page 44)
CSocket for attaching to the AC adapter (page 111)
66
n N
Using Peripheral Devices >
Connecting a Display/LAN Adapter
Connecting the Display/LAN adapter to Your Computer
To connect the display/LAN adapter to your computer
!
Do not move your computer while the display/LAN adapter is connected, as it may disconnect the display/LAN adapter and cause damage to both units.
1 Slide out the I/O plug (1) in the direction of the arrow and route the I/O plug cable (2) to the right of the tab (3).
2 Connect the I/O plug (4) to the I/O port (5) on the computer.
67
n N
Using Peripheral Devices >
Connecting an Optical Disc Drive
Connecting an Optical Disc Drive
To use optical CDs and DVDs with your computer, connect an external optical disc drive (not supplied) to your computer.
Connecting an Optical Disc Drive
!
Be sure to connect an external optical disc drive before you launch any preinstalled disc operation program.
To connect an optical disc drive
1 Plug the power cord (if any) of your external optical disc drive (not supplied) (1) into an AC outlet.
2 Choose the USB port (2) you prefer to use.
3 Plug one end of a USB cable (not supplied) (3) into the USB port, and the other end to the optical disc drive.
See the manual that came with your external optical disc drive for the detailed instructions on connecting the USB cable
to the drive.
68
n N
Using Peripheral Devices >
Connecting an Optical Disc Drive
Disconnecting an Optical Disc Drive
You can disconnect an optical disc drive when your computer is on or off. Disconnecting the drive when the computer is in a
power saving mode (Sleep or Hibernate) may cause the computer to malfunction.
To disconnect an optical disc drive
✍
To disconnect an optical disc drive when your computer is off, skip steps 1 to 5.
1 Close all software applications accessing the optical disc drive.
2 Double-click the Safely Remove Hardware icon on the taskbar.
3 Select the optical disc drive you want to disconnect.
4 Click Stop.
5 Follow the on-screen instructions to disconnect the optical disc drive.
6 Disconnect the optical disc drive from the computer.
69
n N
Using Peripheral Devices >
Connecting External Speakers or Headphones
Connecting External Speakers or Headphones
You can connect external sound output devices (not supplied), such as speakers or headphones, to your computer.
To connect external speakers
✍
Make sure your speakers are designed for computer use.
!
Turn down the volume of the speakers before you turn them on.
The noise canceling function does not work on sound output through external speakers.
Connect external speakers (1) to the headphones jack (2) i with a speaker cable (3) (not supplied).
70
n N
Using Peripheral Devices >
Connecting an External Display
Connecting an External Display
You can connect an external display (not supplied) to your computer. For example, you can use the computer with a computer
display or a projector.
✍
Connect the power cord of your external display after connecting all other cables.
Features and options in this section may not be available on your computer.
Connecting a Computer Display
You need a display/LAN adapter to connect a computer display to your computer.
To connect a computer display
1 If necessary, plug one end of the display's power cord (1) into your display, and the other end into an AC outlet.
2 Plug the display cable (2) into the monitor port (3) a on the display/LAN adapter.
71
n N
Using Peripheral Devices >
Connecting an External Display
Connecting a Projector
You can connect a projector (for example, the Sony LCD projector) to your computer.
You need a display/LAN adapter to connect a projector (for example, the Sony LCD projector) to your computer.
To connect a projector
1 Connect the power cord (1) of your projector into an AC outlet.
2 Plug a display cable (2) into the monitor port (3) a on the display/LAN adapter.
3 Plug an audio cable (4) into the headphones jack (5) i on the computer.
4 Plug the display cable and the audio cable into the port and jack on the projector (6).
72
n N
Using Peripheral Devices >
Selecting Display Modes
Selecting Display Modes
When an external display is connected, you can select either your computer screen or the connected display to use as the
primary monitor.
If you want to work on your computer screen and the external display at the same time, see Using the Multiple Monitors
Function (page 74) for more information.
The procedure for selecting a display depends on the video controller used in the computer.
See the specifications to find out about the configuration of your computer.
73
n N
Using Peripheral Devices >
Selecting Display Modes
To select a display
✍
You may not be able to display the same contents on your computer screen and the external display or projector at the same time, depending on the
type of your external display or projector.
Turn on the external display before turning on your computer.
❑On models with the Intel Graphics Media Accelerator
1 Right-click on the desktop and select Personalize.
2 Click Display Settings.
3 Follow the on-screen instructions to change the settings.
❑On models with the NVIDIA video controller
1 Click Start and Control Panel.
2 Click Additional Options.
3 Click NVIDIA Control Panel.
4 Select the display setup option under Display.
5 Follow the on-screen instructions to change the settings.
❑On models with the ATI video controller
When the computer has an external display connected, you can change the Main/Clone setting as follows:
1 Click Start, All Programs, and Catalyst Control Center.
2 Click CCC.
3 Follow the on-screen instructions to change the settings.
See the help file for more information.
74
n N
Using Peripheral Devices >
Using the Multiple Monitors Function
Using the Multiple Monitors Function
The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you
have an external display connected to the monitor port, your computer screen and the external display can function as a
single desktop.
The procedure for using the Multiple Monitors function depends on the video controller used in the computer.
See the specifications to find out about the configuration of your computer.
You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window
or a toolbar, from one display to the other.
75
n N
Using Peripheral Devices >
Using the Multiple Monitors Function
To use the Multiple Monitors function
✍
Your external display may not support the Multiple Monitors function.
Certain software applications may not be compatible with Multiple Monitors settings.
Make sure that your computer does not enter Sleep or Hibernate mode while you are using the Multiple Monitors function. Otherwise, the computer
may not return to Normal mode.
If you set different colors on each display, do not expand a single window across two displays. Otherwise, your software may not work properly.
Set fewer colors or a lower resolution for each display.
❑On models with the Intel Graphics Media Accelerator
1 Right-click on the desktop and select Personalize.
2 Click Display Settings.
3 Follow the on-screen instructions to change the settings.
❑On models with the NVIDIA or ATI video controller
1 Click Start and Control Panel.
2 Click Adjust screen resolution under Appearance and Personalization.
3 2Right-click the number monitor and select Attached.
4 Click OK.
At the confirmation prompt, click Yes.
76
n N
Using Peripheral Devices >
Using the Multiple Monitors Function
✍
You can also change one of the S button assignments to activate the Multiple Monitors function with the corresponding S button. To change the S
button assignments, press and hold either S button to display the window for changing the assignment.
Additionally, you can set the display colors and resolution for each display and customize the Multiple Monitors function.
77
n N
Using Peripheral Devices >
Connecting a USB Device
Connecting a USB Device
You can connect a Universal Serial Bus (USB) device to your computer, such as a mouse, floppy disk drive, speaker, and
printer.
To connect a USB device
1 Choose the USB port (1) you prefer to use.
2 Plug the USB device cable (2) into the USB port.
78
n N
Using Peripheral Devices >
Connecting a USB Device
Notes on connecting a USB device
❑You may need to install the driver software supplied with your USB device before use. See the manual that came with the
USB device for more information.
❑Be sure to use a USB printer compatible with your version of Windows to print documents.
❑For information on how to remove a USB device, see the manual that came with the device.
❑To protect your computer and/or USB devices from damage, observe the following:
❑When moving the computer with USB devices connected, avoid exposing the USB ports to shock or impact.
❑Do not put the computer into a bag or carrying case when it has USB devices connected.
❑The optional USB floppy disk drive may not be available in some countries or regions.
79
n N
Customizing Your VAIO Computer >
Customizing Your VAIO Computer
This section briefly describes how to change the main settings of your VAIO computer. Among other things, you will learn
how to use and customize the look of your Sony software and utilities.
❑Setting the Password (page 80)
❑Using the VAIO Control Center (page 90)
❑Using the Power Saving Modes (page 91)
❑Using the VAIO Power Management (page 96)
❑Protecting the Hard Disk (page 98)
80
n N
Customizing Your VAIO Computer >
Setting the Password
Setting the Password
In addition to the Windows password, you can use BIOS functions to set two types of passwords to protect your computer:
the power-on password and the hard disk password.
Once you have set the power-on password, you will be prompted to enter the password after the VAIO logo appears to start
your computer. The power-on password allows you to protect your computer from unauthorized access.
The hard disk password provides additional security for the data stored on your built-in storage device. If you set the hard
disk password, other users will not be able to access the data without knowing the password, even if the password-protected
built-in storage device is removed from your computer and is installed in another computer.
81
n N
Customizing Your VAIO Computer >
Setting the Password
Adding the Power-on Password
The power-on password is provided to protect your computer from unauthorized access.
There are two types of the power-on passwords: the machine password and the user password. The machine password is
provided for users with administrative rights on the computer to change all the setup options in the BIOS setup screen, as
well as to start the computer. The user password is provided for the standard users to allow for changing some of the BIOS
setup options, as well as starting the computer. To set the user password, you must first set the machine password.
!
Once you have set the power-on password, you cannot start your computer without entering the password. Be sure not to forget the password. Write
down your password and keep it safe and private from other people.
If you forget the power-on password and need assistance to reset it, a password reset fee will be charged, and your computer may need to be sent in
for service to reset the password.
83
n N
Customizing Your VAIO Computer >
Setting the Password
To add the power-on password (user password)
!
Make sure you set the machine password before setting the user password.
1Turn on the computer.
2Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3Enter the machine password and press the Enter key.
4Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the
Enter key.
5On the password entry screen, enter the password twice and press the Enter key.
The password can be up to 32 alphanumeric characters (including spaces) long.
6Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
84
n N
Customizing Your VAIO Computer >
Setting the Password
Changing/Removing the Power-on Password
To change or remove the power-on password (machine password)
1Turn on the computer.
2Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3Enter the machine password and press the Enter key.
4Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the
Enter key.
5On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter
key.
6Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
86
n N
Customizing Your VAIO Computer >
Setting the Password
Adding the Hard Disk Password
The hard disk password provides additional security for the data stored on your built-in storage device. If you enable the hard
disk password, this adds an extra level of security.
When adding the hard disk password, you must set both the master and user passwords. The master password is provided
for users with administrative rights on the computer to reset the user password in the BIOS setup screen. The user password
is provided to lock your built-in storage device. Once you set the user password, you will have to enter the password along
with the power-on password (if set), after the VAIO logo appears.
!
You cannot start your computer with the master password.
If you forget the master password or the keyboard fails, which is critical to password entry, no bypass is possible and the data stored on the built-in
storage device will not be accessible. There is NO RESET of this password. You will have to replace the built-in storage device at your own expense and
lose all the data originally stored on the device. Be sure to write down the master password and keep it safe and private from other people.
87
n N
Customizing Your VAIO Computer >
Setting the Password
To add the hard disk password
1Turn on the computer.
2Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
✍
If you have set the power-on password, enter your power-on password.
3Press the < or , key to select Security to display the Security tab, select Hard Disk Password, and then press the
Enter key.
The Hard Disk Password entry screen appears.
4Select Enter Master and User Passwords and press the Enter key.
5Select Continue on the warning screen and press the Enter key.
6Enter the master password twice and press the Enter key.
The password should be up to 32 alphanumeric characters (including spaces) long.
7Enter the user password twice and press the Enter key.
The password should be up to 32 alphanumeric characters (including spaces) long.
8At the confirmation prompt, press the Enter key.
9Press the Esc key and then the < or , key to select the tab.Exit
10 Press the M or m key to select Exit Setup and press the Enter key.
At the confirmation prompt, press the Enter key.
88
n N
Customizing Your VAIO Computer >
Setting the Password
Changing/Removing the Hard Disk Password
To change the hard disk password
1Turn on the computer.
2Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
✍
If you have set the power-on password, enter your power-on password.
3Press the < or , key to select Security to display the Security tab, select Hard Disk Password, and then press the
Enter key.
The Hard Disk Password entry screen appears.
4Select Change Master Password or Change User Password and press the Enter key.
5Enter the current password once and then a new password twice.
6Press the Enter key.
7Press the Enter key when the success message appears.
8Press the Esc key and then the < or , key to select the tab.Exit
9Press the M or m key to select Exit Setup and press the Enter key.
At the confirmation prompt, press the Enter key.
89
n N
Customizing Your VAIO Computer >
Setting the Password
To remove the hard disk password
1Turn on the computer.
2Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
✍
If you have set the power-on password, enter your power-on password.
3Press the < or , key to select Security to display the Security tab, select Hard Disk Password, and then press the
Enter key.
The Hard Disk Password entry screen appears.
4Select Enter Master and User Passwords and press the Enter key.
5Enter the current password for Enter Current Hard Disk Master Password and press the Enter key.
6Press the Enter key without entering any letter for the remaining fields.
7Press the Enter key when the success message appears.
8Press the Esc key and then the < or , key to select the tab.Exit
9Press the M or m key to select Exit Setup and press the Enter key.
At the confirmation prompt, press the Enter key.
90
n N
Customizing Your VAIO Computer >
Using the VAIO Control Center
Using the VAIO Control Center
The VAIO Control Center utility allows you to access system information and to specify preferences for system behavior.
To use the VAIO Control Center
1Click Start, All Programs, and VAIO Control Center.
2Select the desired control item and change the settings.
3Once finished, click OK.
The setting of the desired item has been changed.
✍
For more information about each option, see the help file included with the VAIO Control Center.
Some of the control items will not be visible if you open the VAIO Control Center as a standard user.
Produkt Specifikationer
| Mærke: | Sony |
| Kategori: | Laptop |
| Model: | Vaio VGN-P25G |
Har du brug for hjælp?
Hvis du har brug for hjælp til Sony Vaio VGN-P25G stil et spørgsmål nedenfor, og andre brugere vil svare dig
Laptop Sony Manualer
14 Oktober 2024
12 Oktober 2024
10 Oktober 2024
21 September 2024
19 September 2024
15 September 2024
12 September 2024
9 September 2024
1 September 2024
1 September 2024
Laptop Manualer
- Laptop Acer
- Laptop Samsung
- Laptop Panasonic
- Laptop LG
- Laptop Apple
- Laptop HP
- Laptop Asus
- Laptop Gigabyte
- Laptop Toshiba
- Laptop Lenovo
- Laptop Thomson
- Laptop Hannspree
- Laptop Razer
- Laptop Medion
- Laptop Haier
- Laptop Huawei
- Laptop Tripp Lite
- Laptop Packard Bell
- Laptop Microsoft
- Laptop Fellowes
- Laptop Xiaomi
- Laptop Viewsonic
- Laptop Dell
- Laptop Fujitsu
- Laptop MSI
- Laptop Honor
- Laptop ECS
- Laptop Prixton
- Laptop SPC
- Laptop GoClever
- Laptop VIZIO
- Laptop Atdec
- Laptop Hercules
- Laptop Airis
- Laptop EMachines
- Laptop Oregon Scientific
- Laptop Lexibook
- Laptop Kogan
- Laptop ADATA
- Laptop Micromax
- Laptop TechBite
- Laptop Alienware
- Laptop Sylvania
- Laptop Coby
- Laptop Evga
- Laptop Mpman
- Laptop Targa
- Laptop Peaq
- Laptop Ematic
- Laptop XPG
- Laptop Inovia
- Laptop Aplic
- Laptop Odys
- Laptop Ibm
- Laptop Compaq
- Laptop SIIG
- Laptop Getac
- Laptop Jay-tech
- Laptop Vulcan
- Laptop System76
- Laptop General Dynamics Itronix
- Laptop CTL
- Laptop Everex
- Laptop Olidata
- Laptop Dynabook
- Laptop Hamilton Buhl
- Laptop AORUS
- Laptop Humanscale
- Laptop Schenker
Nyeste Laptop Manualer
5 Februar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025
10 Januar 2025