Sony XS-XB1621C Manual

Sony Bilhøjttaler XS-XB1621C

Læs nedenfor 📖 manual på dansk for Sony XS-XB1621C (4 sider) i kategorien Bilhøjttaler. Denne guide var nyttig for 34 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
24
ø 44
54.6
35.4
Woofer
175.6
P.C.D. ø 157
34.9
4 - ø 4.5
92.5 92.5
45º 45º
158
128.5
53.5
ø 85
94.5
47.8 25.1
Unit: mm
* Depending on the attachment location, the dimension value may differ.
Dimensions
Tweeter
Reference Point
Reference Point
Reference Plane
Reference Plane
Reference Axis
Reference Axis
Passive crossover network
Precautions
Do not continuously use the speaker system
beyond the peak power handling capacity.
Keep recorded tapes, watches, and personal credit
cards using magnetic coding away from the
speaker system to protect them from damage
caused by the magnets in the speakers.
Please note the following when installing the units;
otherwise malfunction and/or deterioration in
sound quality may result.
Do not touch the diaphragms and/or
speaker cones by hand or with tools.
Do not put your fingers through the holes
of the frame.
Do not drop foreign objects in the units.
Caution
When using the speakers with an amplifier or power
booster employing the BTL (balanced transformerless)
system, be sure to connect the speaker system cords
directly to the amplifier speaker cords. If the connection
is made through already existing speaker cords which
have a common lead for both the right and left
channels, it is possible that no sound will be heard, and
that the amplifier will be damaged.
If you cannot find an appropriate mounting
location, consult your car dealer or your nearest
Sony dealer before mounting.
Specifications
Speaker: Separate type, 2 way:
Woofer 16 cm cone type
Tweeter 2.5 cm dome type
Short-term Maximum Power*
1: 350 W*2
Rated power: 60 W*2
CTA 2031 RMS Power: 60 W
Rated impedance: 4 Ω
Output sound pressure level: 87±2 dB (1 W, 1 m)*
2
Effective frequency range: 55 – 30,000 Hz*
2
Mass: Woofer:
Approx. 850 g per speaker
Tweeter:
Approx. 80 g per speaker
Passive crossover
network:
Approx. 110 g per box
Supplied accessories Parts for installation
Design and specifications are subject to change without
notice.
*1 “Short-term Maximum Power” may also be referred to as “Peak
Power.
*2 Testing Condition: IEC 60268-5 (2003-05)
Before mounting
A depth of at least 53.5 mm is required to mount the
woofer. Measure the depth of the area where you are
to mount the speaker, and ensure that the speaker is
not obstructing any other components of the car.
Keep the following in mind when choosing a
mounting location:
ˎMake sure that nothing is obstructing around the
mounting location of the door (front or rear) where
you are to mount the speaker.
ˎA hole for mounting may already be cut out of the
inner panel of the door (front or rear). In this case,
you need to modify the board only.
ˎIf you are to mount this speaker system in the door
(front or rear), make sure that the speaker terminals,
frame or magnet do not interfere with any inner
parts, such as the window mechanism in the door
(when you open or close the window), etc.
Also make sure that the speaker grille does not
touch any inner fittings, such as the window cranks,
door handles, arm rests, door pockets, lamps or
seats etc.
ˎThe suitable mounting location for the tweeters
varies depending on the type of car. Choose a
location that suits your car.
Mounting
XS-XB1621C
4-692-688- (1)11
©2016 Sony Corporation Printed in Vietnam
2 Way Component
Speaker System
Instructions GB


Produkt Specifikationer

Mærke: Sony
Kategori: Bilhøjttaler
Model: XS-XB1621C

Har du brug for hjælp?

Hvis du har brug for hjælp til Sony XS-XB1621C stil et spørgsmål nedenfor, og andre brugere vil svare dig