Sony ZS-PE40CP Manual

Sony Hi-Fi system ZS-PE40CP

Læs nedenfor 📖 manual på dansk for Sony ZS-PE40CP (2 sider) i kategorien Hi-Fi system. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
4-453-771- (1)11
Personal Audio System
Operating Instructions
©2013 Sony Corporation Printed in China
ZS-PE40CP
WARNING
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
To reduce the risk of fire or electric shock, do not
expose this apparatus to dripping or splashing,
and do not place objects filled with liquids, such
as vases, on the apparatus.
As the main plug is used to disconnect the unit
from the mains, connect the unit to an easily
accessible AC outlet. Should you notice an
abnormality in the unit, disconnect the main plug
from the AC outlet immediately.
The unit is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been turned
off.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
Do not expose the batteries (battery pack or
batteries installed) to excessive heat such as
sunshine, fire or the like for a long time.
The nameplate is located on the bottom exterior.
Notice for customers: the following
information is only applicable to
equipment sold in countries applying EU
directives
This product has been manufactured by or on
behalf of Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075 Japan. Inquiries
related to product compliance based on
European Union legislation shall be addressed to
the authorized representative, Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters,
please refer to the addresses provided in the
separate service or guarantee documents.
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product.
The recycling of materials will help to conserve
natural resources. For more detailed information
about recycling of this product, please contact
your local Civic Office, your household waste
disposal service or the shop where you
purchased the product.
Europe Only
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the battery or on the packaging
indicates that the battery provided with this
product shall not be treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The
chemical symbols for mercury (Hg) or lead (Pb)
are added if the battery contains more than
0.0005% mercury or 0.004% lead. By ensuring
these batteries are disposed of correctly, you will
help prevent potentially negative consequences
for the environment and human health which
could otherwise be caused by inappropriate
waste handling of the battery. The recycling of
the materials will help to conserve natural
resources.
In case of products that for safety, performance
or data integrity reasons require a permanent
connection with an incorporated battery, this
battery should be replaced by qualified service
staff only. To ensure that the battery will be
treated properly, hand over the product at
end-of-life to the applicable collection point for
the recycling of electrical and electronic
equipment.
For all other batteries, please view the section on
how to remove the battery from the product
safely. Hand the battery over to the applicable
collection point for the recycling of waste
batteries.
For more detailed information about recycling of
this product or battery, please contact your local
Civic Office, your household waste disposal
service or the shop where you purchased the
product.
Licence and Trademark
Notice
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or other
countries.
This product contains technology subject to
certain intellectual property rights of Microsoft.
Use or distribution of this technology outside
of this product is prohibited without the
appropriate license(s) from Microsoft.
All other trademarks and registered trademarks
are of their respective holders. In this manual,
™ and ® marks are not specified.
Location of Controls
The numbers used for the button or jack names in the illustration below are also used in all operation
explanations hereafter.


* MANUAL PRESET
and VOLUME +
have a tactile dot.
Power Sources
To use the unit on AC power
Connect the AC power cord to the unit ( ) and the wall outlet ( ). 
To a wall outlet ( )
To AC IN ( )
To use the unit on batteries
Insert six R6 (size AA) batteries (not supplied) into the battery compartment. To use the unit on batteries,
disconnect the AC power cord from the unit and the wall outlet.
Bottom
Use alkaline batteries
with this unit. The use of
manganese batteries is
not recommended,
since this type of battery
has an extremely short
usage time.
Note
Replace the batteries when the OPR/BATT indicator dims, or when the unit becomes inoperable. Replace all
the batteries with new ones. Before you replace the batteries, be sure to remove any CD and disconnect any USB
device from the unit.
To use the power-management function
This unit is equipped with an automatic standby function. With this function, the unit enters standby
mode automatically in about 20 minutes when there is no operation or audio signal output.
To turn the standby mode on or off, press DISPLAY/ENTER and at the same time. Each time you
press the button, “AUTO STANDBY ON” or “AUTO STANDBY OFF” appears on the display.
Notes
The message “STANDBY” starts flashing on the display about 2 minutes before entering standby mode.
In standby mode, with the AC power cord connected, “STANDBY” appears on the display.
The automatic standby function is not available in the FM/AM function.
Before Using the Unit
To turn the power on or off
Press OPERATE . You can also turn on the unit using the direct power-on function (below).
In this manual, operations are mainly explained using the direct power-on function.
To use the direct power-on function
Press USB , CD , RADIO FM/AM
or AUDIO IN while the unit is turned off. The power turns on
directly in the selected function.
To adjust the volume
Press VOLUME + or .
The volume level of this unit is adjustable in steps from 0 to 31. For the 31st step, “VOL MAX” is displayed.
To listen through headphones
Connect headphones to the (headphones) jack .
Basic Operations
Playing a music disc
You can play the following types of discs with
this unit.
Audio CDs on which CD-DA tracks are recorded
in CD-DA disc format
CD-R/CD-RW discs on which MP3 or WMA
audio files are recorded in ISO9660 Level 1/
Level 2 or Joliet
1 Press CD to turn on the CD function.
2 Press CD OPEN , and place a disc in the
CD compartment with the label side
facing forward.
Press the center area of the disc
gently until it snaps into place.
Label side
facing forward
CD OPEN
3 Close the CD compartment door.
4 Press to start playback.
When you play an MP3 or WMA disc, “MP3”
(for MP3 files) or “WMA” (for WMA files) lights
up on the display.
Audio CD
Track number Playing
time
MP3/WMA disc
MP3/WMA file number
After the folder name*1 and
song title*2 are displayed, the
playing time*3 will appear.
*1 If there is no folder, “ROOT” appears on the
display.
*2 If there is no song title in ID3 or WMA tag
information, “NO TITLE” will be displayed.
*3 If the playing time is more than 100 minutes,
“― ―: ― ―” appears on the display.
Other operations
To Do this
Pause playback Press . To return to
playback, press the button
again.
Stop playback Press . When you press
after playback is
stopped, playback starts from
the beginning of the track (or
MP3/WMA file) you were last
playing (Resume Play).
Cancel Resume
Play
Press twice. When you
press after you cancel
Resume Play, playback starts
from the beginning of the
first track/file.
Select a folder
on an MP3/
WMA disc
Press TUNE/ (Folder) + or
.
Select a track/
file Press or . You can
skip tracks/files one by one.
Find a point in a
track/file
Hold down or
during playback, and release
the button at the desired
point. When locating a point
in pause status, press
to start playback after the
desired point is found.
Example of folder structure and
playing order
The playing order of the folders and files is as
follows:
Folder
MP3/WMA file
Notes on MP3/WMA discs
When a disc is loaded, the unit reads all the files
on that disc. During this time, “READING” is
displayed. If there are many folders or non-MP3/
WMA files on the disc, it may take a long time for
play to begin or for the next MP3/WMA file to
start to play.
We recommend that non-MP3/WMA files or
unnecessary folders are excluded when creating
MP3/WMA discs.
During playback, folders that contain no MP3/
WMA files are skipped.
The audio formats supported by this unit are as
follows:
MP3: File extension “.mp3”
WMA: File extension “.wma”
Note that even if the file name has the correct file
extension but the actual file was created in a
different audio format, this unit may produce
noise or may malfunction.
MP3 PRO format is not supported.
WMA files encoded in WMA DRM, WMA Lossless
and WMA PRO formats cannot be played back.
This unit cannot play audio files on a disc in the
following cases:
When the total number of audio files exceeds
511.
When the total number of folders on a single
disc exceeds 511.
When the directory level (folder depths) exceeds
8 (including “ROOT” folder).
Folder names and file names can be displayed
with up to 32 characters, including quotation
marks.
Characters and symbols that cannot be displayed
by the unit will appear as “_”.
This unit conforms to version 1.0, 1.1, 2.2, 2.3 and
2.4 of the ID3 tag format for MP3 files and the
WMA tag format (defined by ASF (Advanced
Systems Format) specification) for WMA files.
When a file has the ID3 or WMA tag information,
song title, artist name, and album name will be
displayed. If a file does not have the tag
information, the unit displays as follows:
File name instead of the song title.
“NO ARTIST” message instead of the artist
name.
“NO ALBUM” message instead of the album
name.
ID3 tag information can be displayed for up to 64
characters and WMA tag information can be
displayed for up to 32 characters.
Listening to music on a USB
device
You can listen to audio files stored on a USB
device (a digital music player or USB storage
media).
Audio files in MP3 and WMA formats* can be
played on this unit.
* Files with DRM (Digital Rights Management)
copyright protection or files downloaded from an
online music store cannot be played on this unit. If
you try to play one of these files, the unit plays
the next unprotected audio file.
Compatible USB devices
Compatibility requirements for the USB
devices are as follows. Before using with this
unit, check that your device meets the
requirements.
Compliance with USB 2.0 (Full Speed)
Supports Mass Storage mode*
* Mass Storage mode is a mode that allows a
USB device to become accessible to a host
device, enabling file transfers. Most USB
devices support Mass Storage mode.
1 Connect the USB device to the
(USB)
port .
2 Press USB to turn on the USB function.
If the USB device does not have a volume
label*1
“STORAGE DRIVE” scrolls once on the display,
then “xxxFLDR”*2 appears on the display.
If the USB device has a volume label
The volume label*1 scrolls once on the display,
then “xxxFLDR”*2 appears on the display.
*1 A volume label is a name that you can assign to
data storage media or devices.
*2 “xxx” is the total folder number.
3 Press to start playback.
MP3/WMA file number
After the folder name and song title are
displayed, the file number and playing
time* appear.
* If the playing time is more than 100 minutes, it
appears as “--:--” on the display.
Other operations
To Do this
Pause playback Press . To return to
playback, press the button
again*.
Stop playback Press . When you press
after playback is
stopped, playback starts from
the point where you stopped
playback (Resume Play).
Cancel Resume
Play
Press twice. When you
press after you cancel
Resume Play, playback starts
from the beginning of the
first file.
Select a folder Press TUNE/ (Folder) + or
.
Select a file Press or . You can
skip files one by one.
Find a point in
a file
Hold down or
during playback, and release
the button at the desired
point. When locating a point
in pause status, press
to start playback after the
desired point is found.
Remove a USB
device
Hold down until “NO
DEVICE” appears on the
display, and then disconnect
the USB device.
* When playing a VBR MP3/WMA file, playback may
restart from a different point.
Note
When you remove the USB device, always perform
the procedure described in the above “Other
operations.” Removing the USB device without
performing this procedure may corrupt the data on
the USB device or damage the device itself.
To select a memory on the device for
playback
If the USB device has more than one memory (for
example, an internal memory and a memory
card), you can select which memory to use and
then start playback. Make sure to select a
memory before starting playback as you cannot
select a memory during playback.
1 Connect the USB device to the
(USB)
port .
2 Press USB to turn on the USB function.
3 Press USB MEMORY SELECT
until
“SELECT?” appears on the display.
4 Press DISPLAY/ENTER .
5 Press   or repeatedly to select
a memory number.
The memory name appears. The name will be
displayed in various types, depending on the
specifications of the USB device.
If only one memory can be selected, proceed
to step 6.
6 Press DISPLAY/ENTER .
To change play modes
Press MODE repeatedly while the USB device
is stopped.
You can select normal play mode (playback in
sequence of all files on the USB device), folder
play mode (“ ” for all files in the specified folder
on the USB device), repeat play mode (“ ” for
repeating all files/“ 1” for repeating one file), or
shuffle play mode (“SHUF”). For details, see
“Selecting play mode” on the back page.
Notes on the USB device
Operation is not always guaranteed, even if the
USB devices meet the compatibility requirements.
It may take a long time before playback starts
when:
The folder structure is complex.
The USB device is close to capacity.
When a USB device is connected, the unit reads all
the files on the device. If there are many folders or
files on the device, it may take a long time for the
unit to finish reading them.
Do not connect a USB device to the unit through a
USB hub.
With some connected USB devices, after an
operation is performed, there may be a delay
before it is performed by this unit.
This unit may not support all the functions
provided with a connected USB device.
The playback order on this unit may differ from
the playback order on a connected USB device.
Do not save non-MP3/WMA files or unnecessary
folders to a USB device that contains MP3/WMA
files.
During playback, folders that contain no MP3/
WMA files are skipped.
The audio formats supported by this unit are as
follows:
MP3: File extension “.mp3”
WMA: File extension “.wma”
Note that even if the file name has the correct file
extension but the actual file was created in a
different audio format, this unit may produce
noise or may malfunction.
MP3 PRO format is not supported.
WMA files encoded in WMA DRM, WMA Lossless
and WMA PRO formats cannot be played back.
This unit cannot play audio files on a USB device
in the following cases:
When the total number of audio files in a single
folder exceeds 999.
When the total number of audio files on a single
USB device exceeds 5,000.
When the total number of folders on a single
USB device exceeds 255 (including the “ROOT”
folder).
When the directory level (folder depths) exceeds
8 (including the “ROOT” folder).
These numbers may vary depending on the file
and folder structure.
Compatibility with all encoding/writing software is
not guaranteed. If audio files on the USB device
were originally encoded with incompatible
software, those files may produce noise or
interrupted sound, or may not be played back at
all.
Folder names and file names can be displayed
using up to 32 characters, including quotation
marks.
Characters and symbols that cannot be displayed
by the unit will appear as “_”.
This unit conforms to version 1.0, 1.1, 2.2, 2.3 and
2.4 of the ID3 tag format for MP3 files and the
WMA tag format (defined by ASF (Advanced
Systems Format) specification) for WMA files.
When a file has the ID3 or WMA tag information,
song title, artist name, and album name will be
displayed. If a file does not have the tag
information, the unit displays as follows:
File name instead of the song title.
“NO ARTIST” message instead of the artist
name.
“NO ALBUM” message instead of the album
name.
ID3 tag information can be displayed for up to 64
characters and WMA tag information can be
displayed for up to 32 characters.
Listening to the radio
1 Press RADIO FM/AM repeatedly to
select the band.
Each time you press the button, the radio
band changes as follows:
“FM” “AM”
2 Press and hold TUNE/ + or until
the frequency digits begin to change on
the display.
The unit automatically scans the radio
frequencies and stops when it finds a clear
station.
If you cannot tune to a station using the
automatic tuning mode, press TUNE/ + or
repeatedly to change the frequency step
by step.
When an FM stereo broadcast is received, “ST”
lights up on the display.
Tip
If the stereo FM reception is noisy, press MODE
until “MONO” appears on the display. You will lose
the stereo effect, but the reception will improve.

Produkt Specifikationer

Mærke: Sony
Kategori: Hi-Fi system
Model: ZS-PE40CP

Har du brug for hjælp?

Hvis du har brug for hjælp til Sony ZS-PE40CP stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hi-Fi system Sony Manualer

Sony

Sony CMT-BX77DBi Manual

22 December 2024
Sony

Sony CMT-Z100DiR Manual

22 December 2024
Sony

Sony Walkman NW-A105 Manual

12 September 2024
Sony

Sony HCD-451 Manual

3 September 2024
Sony

Sony DHC-MD373 Manual

2 September 2024
Sony

Sony HST-211 Manual

31 August 2024
Sony

Sony SHAKE-99 Manual

30 August 2024
Sony

Sony SHAKE-55 Manual

30 August 2024
Sony

Sony SHAKE-X3D Manual

30 August 2024
Sony

Sony SHAKE-77 Manual

30 August 2024

Hi-Fi system Manualer

Nyeste Hi-Fi system Manualer

Sencor

Sencor STT-650SBA Manual

24 December 2024
LG

LG LX-220 Manual

22 December 2024
Philips

Philips FB900 Manual

21 December 2024
Sven

Sven HA-950 Manual

20 December 2024
Atoll

Atoll SDA300 Manual

18 December 2024
Atoll

Atoll ST200 Manual

18 December 2024
Majority

Majority Peterhouse Graduate Manual

16 December 2024
Majority

Majority Boxworth DAB-624 Manual

16 December 2024
Vimar

Vimar ELVOX K62K0.04 Manual

15 December 2024
Vimar

Vimar ELVOX K62K0.01 Manual

15 December 2024