Speco Technologies ZIPK8N2 Manual

Speco Technologies Overvågningskamera ZIPK8N2

Læs nedenfor 📖 manual på dansk for Speco Technologies ZIPK8N2 (2 sider) i kategorien Overvågningskamera. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
Click to search IP cameras in the same network. Choose the IP camera(s) Search
you want to add, and then click icon to add to the NVR.
Enter the camera's user name & password (default: admin/admin) to add the
camera(s).You can also click button to add individual IP camera to a single
channel.
1 Connection Diagram
2 Startup Wizard
1) Start wizard
Click the Start Wizard button to start setup.
2)Network Configuration
: This address allows the NVR to access the Internet. The format of the Gateway
Gateway address is the same as the IP Address. For example, “192.168.001.001”.
: DNS1 is the primary DNS server and DNS2 is a backup DNS server. DNS1/DNS2
Usually should be enough just to enter the DNS1 server address.
Port
Web Port: This is the port that you will use to log in remotely to the NVR (e.g. using the Web
Client). If the default port 80 is already taken by other applications, please change it.
This is the port that the NVR will use to send information through (e.g. using Client Port:
the mobile app). If the default port 9000 is already taken by other applications, please
change it.
This is the port that the NVR uses to transmit real-time streaming to other RTSP Port:
devices (e.g. a streaming media player)
To log in remotely to the NVR using a web browser through DDNS, port forwarding UPNP:
must be set up in the router. Enable this option if the router supports UPnP.
3) Date/Time
This menu allows you to configure the Date, Time, Date Format, Time Format,
Time Zone, NTP and DST.
Date and Time
Click on the calendar icon to set the current system date.
NTP
Check the “ ” box, and select the NTP server.NTP
DST
DST stands for Daylight Savings Time.
Date: Click on the calendar icon to set the system date.
Click to set the system time.Time:
Date Format: Choose from the dropdown menu to set preferred date format.
Time Format: Choose time format between 24Hour and 12Hour.
Set the correct time zone.Time Zone:
4)IP Camera
Click the Search button to search for cameras on the local network and then click on a
camera in the list.
IP Address/Domain: IP address or domain name of the IP camera.
Alias: Nickname of the camera.
Position: Position to display the camera name on the screen.
Port: Port of the IP camera.
Protocol: Choose the protocol of the IP camera from the dropdown menu
User Name: User Name of the IP camera
Password: Password of the IP camera
Bind channel: Choose a channel on the NVR to associate with the camera.
DST: Enable if Daylight Saving Time (DST) is observed in your region
: Select the amount of time to offset for DSTTime Offset
: Choose to set the daylight saving time in weeks or in daysTime Mode
: Set the start time and end time for daylight savingStart Time/End Time
1) The recorder can be connected to the Internet for remote viewing.
Connect the included power adapter.2)
A USB flash drive can be connected for backups and firmware updates.3)
Connect the video output of the NVR to the TV or monitor via HDMI or VGA connection.4)
Connect the cameras to the ethernet ports. The ports provide power to the cameras5)
via the ethernet cable Video will show automatically and may take up to 1 minute .
to take effect.
Speco Gray Series Surveillance SystemViewer
When the NVR is powered on for the first time, a password is required
to be set. Make sure to store the username and password in a safe
place.
Startup menu includes: start wizard page, Network, Network Configuration,
Date/Time, IP Camera Setup, Disk, Resolution , Mobile and Summary.
Please check the DHCP box if connecting to a network that assigns IP addresses
automatically. A router will typically have DHCP capability.
IP Address : The IP address identifies the NVR in the network. It consists of four
groups. of numbers between 0 to 255, separated by periods. For example,
“192.168.001.100”.
NTP stands for Network Time Protocol. This allows the date and time to be
synchronized with a time server on the Internet. To use this feature, make sure
the NVR is connected to the Internet.
IP cameras that are on the local network can be added to the NVR through this
menu. Note that if all 4 cameras have been added to the NVR through the camera
ethernet ports, there is no need to dd cameras again. a
1
5
or
3
44
2

Produkt Specifikationer

Mærke: Speco Technologies
Kategori: Overvågningskamera
Model: ZIPK8N2

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies ZIPK8N2 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Overvågningskamera Speco Technologies Manualer

Speco Technologies

Speco Technologies O2VLB7 Manual

3 September 2024
Speco Technologies

Speco Technologies VLDT3GM Manual

20 August 2024
Speco Technologies

Speco Technologies CVC624WDR Manual

19 August 2024
Speco Technologies

Speco Technologies O4iB2M Manual

18 August 2024
Speco Technologies

Speco Technologies ZIPTW4B1 Manual

18 August 2024
Speco Technologies

Speco Technologies O2ID21M Manual

17 August 2024
Speco Technologies

Speco Technologies Intensifier 2 CVC6246iHR Manual

17 August 2024
Speco Technologies

Speco Technologies O4DT1 Manual

17 August 2024
Speco Technologies

Speco Technologies O4iB2 Manual

17 August 2024
Speco Technologies

Speco Technologies O8D8M Manual

16 August 2024

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Sony

Sony SNC-DH160 Manual

16 November 2024
Bresser

Bresser DL-30MP Manual

15 November 2024
D-Link

D-Link DCS-6500LHV2 Manual

14 November 2024
D-Link

D-Link DCS-2803KT Manual

13 November 2024
D-Link

D-Link DCS-2804KT Manual

13 November 2024
D-Link

D-Link DCS-931L Manual

13 November 2024
D-Link

D-Link DCS-6100LHV2 Manual

13 November 2024
Philips

Philips Series 3000 HSP3800 Manual

13 November 2024
Emos

Emos H4060 Manual

13 November 2024
Philips

Philips Series 3000 HSP3500 Manual

13 November 2024