Speco Technologies ZIPK8WN2 Manual


Læs nedenfor 📖 manual på dansk for Speco Technologies ZIPK8WN2 (3 sider) i kategorien Overvågningskamera. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
Speco Gray Viewer Series Surveillance System
After Wireless NVR startup is completed, the Startup Wizard will be displayed. Wizard setting menu
includes: Set Admin Password ,Homepage, HDD Management, Network Configuration, Email
Configuration , Record Schedule and General System Configuration.
Set Admin Password
2) Homepage and HDD Management
You can click “Cancel” to skip Start Wizard. Check “Don't show this window next time" if you
dont want to display Start Wizard when system start-up.
Overwrite: Use this option to overwrite the old recordings on the HDD when the HDD is full.
For example, if you choose the option 7 days then only the last 7 days recordings are kept
on the HDD. To prevent overwriting any old recordings, select Disable. If you have disabled
this function, please check the HDD status regularly, to make sure the HDD is not full.
Please create a user name and password for your device.
Select the HDD which you want to format, and then clickFormat HDD” button to format the HDD.
The hard drive comes pre formatted if a new hard drive is installed for the first time - , ,
it will need to be reformatted .
Install the cameras on the walls and connect the power adapters to
each camera. Tip: The recorder should be at the center of all the
cameras for best performance.
Plug in the Wireless NVR power adapter to the wall outlet. You
may use the included power cable extensions for the cameras
and/or recorder to desired power outlet if needed.
Connect the Wireless NVR to your router using the LAN ports with
the included Ethernet cable so that you may view the cameras
from a web browser or mobile device (optional).
When the Wireless NVR is powered on,it will automatically start the pairing
process with the cameras. Once the process is complete,the Wireless
NVR will display live video feeds from your cameras and then start
recording.
You will briefly see a live video on display before you start the Startup
Wizard.
To configure the advanced settings for device, please follow the Startup
Wizard instructions to complete installation as shown below.
(1)
(2)
(3)
(4)
NO Physical interface Connection
Ground connection A terminal to connect a separate ground cable .
* Make sure to add a ground cable in order to use the equipment safely .
SD SD Port
USB port Connect with USB .
HDMI
Connect with HDMI display devices such as PC monitor , .
WAN RJ45:( )
Network port
Connect with WAN Ethernet cable , .
Power port Connect with the power supply DC12V 2A included with the device , .
1
2
3
4
5
6
Antenna Receive signal from wireless camera .
7
1
3
57
6
4
22
1
3
57
6
4
22
(3)
(5)
(6)


Produkt Specifikationer

Mærke: Speco Technologies
Kategori: Overvågningskamera
Model: ZIPK8WN2

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies ZIPK8WN2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Overvågningskamera Speco Technologies Manualer

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

QSC

QSC NC-110 Manual

21 November 2024
Sony

Sony SNC-DH160 Manual

16 November 2024
Bresser

Bresser DL-30MP Manual

15 November 2024
D-Link

D-Link DCS-6500LHV2 Manual

14 November 2024
D-Link

D-Link DCS-2803KT Manual

13 November 2024
D-Link

D-Link DCS-2804KT Manual

13 November 2024
D-Link

D-Link DCS-931L Manual

13 November 2024
D-Link

D-Link DCS-6100LHV2 Manual

13 November 2024
Emos

Emos H4060 Manual

13 November 2024