StarTech.com BALBOARD Manual


Læs nedenfor 📖 manual på dansk for StarTech.com BALBOARD (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Quick-Start Guide
Manual Revision: 06/01/2018
Package Contents
Balance Board x 1
Rubber Feet x 4
Screws x 4
Washers x 4
Quick-Start Guide x 1
Warning Statements
Read all warning statements before using the Balance Board.
The Balance Board, by design, is unstable and may require frequent
user interaction to achieve a balanced stance; as a result, caution
should be exercised when mounting, dismounting and/or using the
Balance Board as personal injury and/or equipment damage can
result from a fall.
While using the Balance Board, always wear appropriate footwear
(note: running shoes and other at soled shoes are recommended).
Consult a physician before using the Balance Board.
Use the Balance Board on a rm, at, dry, and level surface.
The Balance Board can present a tripping hazard. Always store the
Balance Board in a location with no foot trac.
Individuals under the age of 18 should be supervised by an adult when
using the Balance Board.
The Balance Board has a maximum weight capacity of 300 pounds.
Requirements
Phillips Head Screwdriver x 1
A at, level surface for use
Installation
1. Align the four Rubber Feet with the predrilled holes.
2. Place one Washer over each of the four Screws.
3. Insert the four Screws (with the attached Washers) into the holes
in each of the Rubber Feet. (gure 1)
4. Fasten the four Screws in place using a Phillips Head Screwdriver.
Note: Do not overtighten the Screws.
Basic Operation
1. Place the Balance Board on a level surface. Or, drag the Balance
Board out from under your desk using the Foot Control Feature
(located along the rear edge of the Balance Board).
2. Find a location on your desk or other stable object where you can
rest your hand to stabilize your body, before attempting to stand
on the Balance Board.
3. Step onto the Balance Board, one foot at a time.
4. Slowly shift your weight towards the centre while engaging all of
your leg, back, and core muscles to facilitate a balanced stance.
SKU #: BALBOARD
Balance Board - for Standing Desk or Sit-Stand Workstation
Advanced Operation
To increase the balancing diculty, you can remove the Rubber
Feet. This will increase the degree of tilt in every direction.
Note: For your own safety, only attempt the Advanced Operation
after you have achieved proper balance during normal Operation.
1. Remove the Rubber Feet using a Phillips Head Screwdriver.
2. Repeat steps 1-5 from the Basic Operation section.
Product Diagram
Bottom View
For the latest information, specications, and support visit www.startech.com/BALBOARD.
Screws
Washers
Rubber
Feet
Spherical
Base
Foot Control
Feature
gure 1


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Ikke kategoriseret
Model: BALBOARD

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com BALBOARD stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret StarTech.com Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Gigabyte

Gigabyte ODIN GT 550W Manual

23 November 2024
Stamos

Stamos S-PLASMA 60U Manual

23 November 2024
Velbus

Velbus VMBPIRO-W-20 Manual

23 November 2024
Honor

Honor 90 Pro Manual

23 November 2024
Honor

Honor 80 SE Manual

23 November 2024
Medela

Medela Safe & Dry Manual

22 November 2024
Jane

Jane First Potty Manual

22 November 2024