StarTech.com P5Q4A-USB-CARD Manual


Læs nedenfor 📖 manual på dansk for StarTech.com P5Q4A-USB-CARD (4 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
For additional self-service support options and community forums, please visit: www.StarTech.com/support
Revision: August 9, 2024
Quick-Start Guide
Product ID
P5Q4A-USB-CARD
Feature Function
1Full-Prole Bracket Secures the onto the PCIe USB Card Host Computer
Case
2USB Type-A Ports (x4) Connects peripheral devicesUSB-A
Supports up to 5Gbps Speeds
3PCI Express p1-x4
Connector
Insert into a on the PCI Express Slot Host Computer
Supports PCIe 2.0
4LP4 Power Connector
(Optional) Connect a from theLP4 Power Cable Host
Computer’s Power Supply
Only needed if the can’t supply enough powerPCIe Slot
4SATA Power
Connector
(Optional) Connect a from theSATA Power Cable Host
Computer’s Power Supply
Only required if the power is insucientPCIe Slot
4-Port USB 3.2 (5Gbps) Card - 4 Dedicated Controllers
Package Contents
PCIe USB Card x 1
Quick-Start Guide x 1
Requirements
For the latest manuals, product information, technical specications, and declarations of
conformance, please visit: www.StarTech.com/P5Q4A-USB-CARD
Phillips head screwdriver
Installation
Install the PCI Express Card
WARNING!
Static electricity can cause severe damage to PCI Express cards. Ensure proper grounding
before opening the computer case or touching the PCI Express card. Use an Anti-Static
Strap when installing any computer component. If an Anti-Static Strap isn’t available,
discharge built-up static electricity by touching a large grounded metal surface for
several seconds. Handle the PCI Express card by its edges, avoiding contact with the gold
connectors.
1. Turn o the and any that are connected to it (for Computer Peripheral Devices
example, , , etc.).Printers External Hard Drives
2. Unplug the from the back of the .Power Cable Computer
3. Disconnect any that are connected to the .Peripheral Devices Computer
4. Remove the from the . Consult the documentation that came Cover Computer Case
with the for details about how to do this safely.Computer
5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate
from the back of the . Consult the documentation that came with the Computer Case
Computer for details about how to do this safely. This card works in PCI Express x4, x8,
or p1-x16 slots.
6. Gently insert the into the open and fasten the PCI Express Card PCI Express Slot
Bracket Computer Case to the back of the .
7. (Optional) Connect a or from the LP4 SATA Power Cable Host Computer’s Power
Supply LP4 SATA Power Connector PCIe USB to the or , located on the rear of the
Card.
Note: It’s recommended to connect the LP4 or Sata Power to ensure sucient power is
provided to the card and to each USB port.
*Product may vary from image
1
4
3
2
5


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Ikke kategoriseret
Model: P5Q4A-USB-CARD

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com P5Q4A-USB-CARD stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret StarTech.com Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer