StarTech.com PM1115U2 Manual
StarTech.com
Printserver
PM1115U2
Læs nedenfor 📖 manual på dansk for StarTech.com PM1115U2 (2 sider) i kategorien Printserver. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
Quick start guide
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 07/03/2015
For the latest information, technical specications, and support for
this product, please visit www.startech.com/PM1115U2.
Packaging contents
• 1 x USB 2.0 network LPR print server
• 1 x universal power adapter (NA/UK/EU/AU)
• 1 x RJ45 network cable
• 1 x driver CD
• 1 x quick start guide
System requirements
A computer running one of the following operating systems:
• Windows® 7 (32-bit or 64-bit)
• Windows 8 (32-bit or 64-bit)
• Windows 8.1 (32-bit or 64-bit)
• Windows Server® 2003
• Windows Server 2008
• Windows Server 2012
• Windows® XP
• Mac OS 10.7 and later (tested up to 10.10)
Operating system requirements are subject to change. For the latest
requirements, please visit www.startech.com/PM1115U2.
PM1115U2
10/100 Mbps Ethernet to USB 2.0 Network LPR Print Server
*actual product may vary from photos
Product diagram
Front view
Power jack
Link LED RJ45 Ethernet port Activity LED
Power LED
Rear view
USB type-A port
Hardware installation
Connect a printer to the print server
1. Turn o the printer that you want to connect to the print server.
2. Connect one end of a USB 2.0 cable (not included) to the printer
and the other end of the cable to the USB type-A port on the print
server.
3. Turn on the printer.
4. Plug one end of the universal power adapter into the power jack
on the back of the print server and the other end into a power
source. The power LED (green) illuminates to indicate that the
print server is turned on.
When the print server is connected correctly to the network, the link
LED (green) illuminates.
Software installation
Install the software on a computer running a version
of Windows OS
1. Connect an Ethernet cable to the RJ45 Ethernet port on the print
server and then to your router or network.
2. On the computer that’s connected to the same router or network,
insert the provided CD into the CD or DVD drive.
3. In the AutoPlay message, click Networking Printer Wizard and
follow the on-screen instructions.
4. Click the Network Printer Wizard shortcut on your desktop.
5. When prompted, install the drivers for the printer.
When the wizard is complete, the printer is ready to be used.
Produkt Specifikationer
| Mærke: | StarTech.com |
| Kategori: | Printserver |
| Model: | PM1115U2 |
Har du brug for hjælp?
Hvis du har brug for hjælp til StarTech.com PM1115U2 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Printserver StarTech.com Manualer
6 September 2024
20 August 2024
20 August 2024
17 August 2024
20 Maj 2024
Printserver Manualer
- Printserver TP-Link
- Printserver Lexmark
- Printserver D-Link
- Printserver Dymo
- Printserver Edimax
- Printserver TRENDnet
- Printserver König
- Printserver Netgear
- Printserver Digitus
- Printserver LevelOne
- Printserver Sitecom
- Printserver Intellinet
- Printserver Hawking Technologies
- Printserver SEH
- Printserver Silex
- Printserver EXSYS
- Printserver Lantronix
Nyeste Printserver Manualer
13 September 2024
31 August 2024
31 August 2024
31 August 2024
31 August 2024
29 August 2024
29 August 2024
20 August 2024
19 August 2024
19 August 2024