StarTech.com PRIVSCNMON34W Manual

StarTech.com Skærmfilter PRIVSCNMON34W

Læs nedenfor 📖 manual på dansk for StarTech.com PRIVSCNMON34W (2 sider) i kategorien Skærmfilter. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: June 10, 2021 10:08 AM
Product Diagram (PRIVSCNMONxx and PRIVACY-SCREEN-xx)
Component Function
1Privacy Filter
Privacy comes into eect when viewing
anywhere past 30 degrees from the left and
right of center
Total eld of view of 60 degrees
2Mounting Tabs (x 5)
Secure the to the Privacy Filter Monitor’s
surface
The adhesive on the Mounting Tabs
becomes less eective with frequent removal/
reapplication
3Adhesive Strips (not
displayed)
Secure the to the Privacy Filter Monitor’s
surface
The become less eective Adhesive Strips
with frequent removal/reapplication
Package Contents
Privacy Screen x 1
Set of Adhesive Strips x 1 (screens up to 27”) or x 2 (screens larger than 27”)
Set of Mounting Tabs x 1
Wiping Cloth x 1
Quick Start Guide x 1
Requirements
For the latest requirements, please visit the following link and replace “xx” with the desired
privacy lter size / SKU:
www.startech.com/PRIVSCNMONxx
www.startech.com/PRIVACY-SCREEN-xx
Universal Privacy Filter
Install the Privacy Filter -- Adhesive Strips
For installations that are intended to be permanent, or if the does not feature Monitor
large , please use the . Bezels Adhesive Strips
1. Clean the and , using the . Laptop Display Bezels Wiping Cloth
2. Select the side of the that is intended to face outward (i.e. matte or Privacy Filter
glossy side) and place the on a clean and at surface with the selected Privacy Filter
side facing down.
3. Remove all the from the .Adhesive Strips Transparent Lining
Removing the Adhesive Strips
4. Carefully align the along the edges (top, bottom, left, and right) of Adhesive Strips
the and ax to the by applying rm pressure to all the Privacy Filter Privacy Filter
Adhesive Strips.
Applying the Adhesive Strips
5. Carefully remove the from the , exposing the Protective Backing Adhesive Strips
screen side adhesive.
Remove the Protective Backing from the Adhesive Strips
1
2/3


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Skærmfilter
Model: PRIVSCNMON34W

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com PRIVSCNMON34W stil et spørgsmål nedenfor, og andre brugere vil svare dig