StarTech.com RKPW081915 Manual


Læs nedenfor 📖 manual på dansk for StarTech.com RKPW081915 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 08/13/2020
For the most up-to-date information, please visit: www.startech.com
RKPW081915
8 Outlet PDU Power Distribution Unit 125V 15A (12A UL)
*actual product may vary from photos
Packaging Contents
RKPW081915 Power Distribution Unit
Installation Guide
System Requirements
19” front/rear mounting rack/cabinet (EIA 310-D compliant)
125VAC power source
Specications
Number of Power Outlets 8
Connectors 8 x NEMA 5-15 female
Electrical Rating 125VAC / 15A
LEDs 1 x Ground (green)
1 x Surge (red)
Operating Temperature -5oC to 45oC (23oF to 113oF)
Storage Temperature -25oC to 65oC (-13oF to 149oF)
Dimensions 482.6mm x 95.5mm x 42.7mm
Weight 2016g
Installation
1. The power distribution unit takes up 1U of rack space, so locate an
appropriate location on the rack and mount it against the front or
rear mounting posts.
2. Using the mounting hardware (screws, nuts, etc.) provided with
your rack or from your rack manufacturer, secure the unit to the
posts.
3. Connect the power cable from the distribution unit to a 125VAC
power source.
Note: It is recommended that the unit be connected directly to a
main source and not another distribution unit.
4. Toggle the “Reset” switch on the front of the unit to the on’
position to energize the unit.
5. The “Surge LED should light up to indicate surge protection
is active. The “Ground” LED should light up to indicate proper
grounding is present.
Note: If the “SURGE” LED indicator is o, the surge protection circuit
is compromised. Power cycle the power strip by toggling the power
switch to the “OFF” position and back to the “ON” position. If a
power cycle does not remedy the issue, it is likely the power strip has
absorbed a power surge. Please contact your authorized
StarTech.com reseller to purchase a replacement, or StarTech.com if
you require additional support.
6. You may now attach your 125VAC compatible devices to the
distribution unit.
Note: Combined power draw from all devices should not exceed
15A, otherwise the built-in circuit breaker will trip.
7. In the event of an overload scenario, the built-in circuit breaker
will be tripped and power to all outlets will be stopped.
8. Disconnect the problem device or all devices from the distribution
unit and toggle the “Reset switch to turn the ports back on.
Front View
Rear View
Reset switchGround LEDSurge LED
NEMA 5-15 outlets


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Ikke kategoriseret
Model: RKPW081915

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com RKPW081915 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret StarTech.com Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024