StarTech.com SATDOCK2REU3 Manual


Læs nedenfor 📖 manual på dansk for StarTech.com SATDOCK2REU3 (2 sider) i kategorien Vugge/dockingstation. Denne guide var nyttig for 26 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
I T: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
P T: Guia do usuário - pt.startech.com
Manual Revision: 02/19/2014
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
1x 2 HDD Dock Duplicator/Eraser
1x USB 3.0 Cable
1x Power Adapter
3x Power Adapter Clips (NA/UK/EU)
1x Instruction Manual
System Requirements
For Drive Duplication
Source and Destination 2.5 or 3.5” HDDs
For Interfacing with PC
USB enabled computer system with available USB port
Microsoft® Windows® XP/ Server 2003/ Vista/ Server 2008 R2/ 7/ 8
(32/64-bit), or Apple® Mac OS® X, or Linu
SATDOCK2REU3
USB 3.0 SATA HDD/SSD Dock- 1:1 Duplicator
*actual product may vary from photos
Link LED 25%
Clone/Erase
Completed
Indicator
Power LED 50%
Clone/Erase
Completed
Indicator
HDD 1 Activity
LED 75%
Clone/Erase
Completed
Indicator
HDD 2 Activity LED
100% Clone/Erase
Completed Indicator
Clone
Button
HDD1 2.5/3.5
Source Slot with
Eject Button
Source
Destination
HDD2 2.5”/3.5”
Destination
Port with Eject
Button
USB 3.0
Port Erase
Button Power
Adapter
Port
Power
Switch
WARNING! Hard drives and storage docks require careful handling,
especially when being transported. If you are not careful with
your hard disk, lost data may result. Always handle your hard drive
and storage device with caution. Be sure that you are properly
grounded by wearing an anti-static strap when handling computer
components or discharge yourself of any static electricity build-up
by touching a large grounded metal surface (such as the computer
case) for several seconds.
Hardware Installation
1. Ensure the power switch is set in the o position. Connect the
included power adapter from an available AC power outlet to the
Power Adapter Port on the back of the SATDOCK2REU3.
2. Connect the included USB 3.0 cable from the USB 3.0 Port on the
SATDOCK2REU3 to the USB port on your computer system.
3. Connect the 2.5” or 3.5” HDD you would like to create a duplicate
of in the HDD 1 Dock port.
4. Connect the 2.5” or 3.5” HDD you would like to have over written
to the HDD 2 Dock port.
5. Press the power switch to the On” position, the SATDOCK2REU3 is
now ready to use.
Hardware Operation
Hard Drive Duplication
WARNING! Any Data remaining on the target drive will be
over written.
NOTE: Destination drive must be the same size or larger than the
source drive.
1. Press and hold the clone button on the front of the
SATDOCK2REU3, for several seconds until the progress bar LEDs
ash red.
2. The Hard Drive Duplication process begins. The process will be
completed when the LED indicator reaches 100%.
3. The destination drive is now contains the same data as the
source drive.
4. To check the drive the dock will need to be powered o and back
on to enter PC mode again.


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Vugge/dockingstation
Model: SATDOCK2REU3

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com SATDOCK2REU3 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Vugge/dockingstation StarTech.com Manualer

Vugge/dockingstation Manualer

Nyeste Vugge/dockingstation Manualer

Vimar

Vimar 20585 Manual

15 December 2024
Vimar

Vimar 19585 Manual

15 December 2024
Denver

Denver BTL-350 Manual

5 Oktober 2024
Jam

Jam Thrill HX-P320 Manual

4 Oktober 2024
Pyle

Pyle PWPBT05BL Manual

4 Oktober 2024
Ewent

Ewent EW7018 Manual

4 Oktober 2024
Jam

Jam Splash Manual

4 Oktober 2024