StarTech.com SDOCKU313 Manual


Læs nedenfor 📖 manual på dansk for StarTech.com SDOCKU313 (2 sider) i kategorien Vugge/dockingstation. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Quick start guide
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 06/17/2016
Packaging contents
1 x USB 3.1 dock for SATA drives
1 x USB 3.1 A-to-B cable
1 x universal adapter
4 x power adapter plug (NA/UK/EU/AUS)
1 x instruction manual
For the latest information, technical specications, and support for
this product, please visit www.startech.com/SDOCKU313.
System requirements
USB-enabled computer system with an available USB port
2.5 in. or 3.5 in. SATA HDD or SSD
Note: To obtain the maximum USB throughput, StarTech.com
recommends that you use a PC with a USB 3.1 Gen 2 port.
Operating systems are subject to change. For the latest
requirements, please visit www.startech.com/SDOCKU313.
SDOCKU313
USB 3.1 (10 Gbps) dock for SATA drives
Product overview
Front view
Power button
Power and activity
LED
Drive slot Drive eject
button
Rear view
USB 3.1 type-B
connector (host)
DC power
connector *actual product may vary from photos
Install the drive
Warning! Hard drives and storage enclosures should be handled
carefully, especially when theyre transported. If you’re not careful
with your hard disk, you may lose data as a result. Always handle
storage devices with caution.
1. Connect the external power adapter from the drive dock to a
power outlet.
2. Insert a 2.5 in. or 3.5 in. drive into the drive slot on the top of the
docking station. Make sure that the connectors on the drive are
facing the same corner of the slot that has a cutout in the door.
The label on the drive should face the front of the dock.
3. Connect the included USB 3.1 cable from the drive dock to an
available USB port on your computer system. Your computer can
be turned on or turned o when you connect the USB cable.
4. Press the button on the top of the drive dock. The LED Power
under the power button should light up to indicate that the dock
is powered on. The LED blinks when the drive is being accessed.
Prepare the drive
If you install a hard drive or solid-state drive that already has data
on it, after you plug in the drive, it appears under or My Computer
Computer with a drive letter assigned to it.
If you install a brand-new drive that doesn’t contain any data, you
must prepare the drive for use.
If you use a computer thats running Windows® 2000, Windows® XP,
Windows Vista®, or Windows® 7, do the following:
1. Depending on the OS version that you’re running, do one of the
following:
On your desktop, right-click .My Computer
On your desktop, right-click .Computer
2. Click .Manage
3. On the Computer Management Disk Management screen, click .
4. Locate the disk that is labeled . To conrm that the Unallocated
drive is the correct one, check the drive capacity.
5. Right-click the section of the window that says and Unallocated
click New Partition.
6. To set up the drive, complete the instructions in the New
Partition wizard.
When the drive is successfully installed, the disk appears under My
Computer Computer or with a drive letter assigned to it.


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Vugge/dockingstation
Model: SDOCKU313

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com SDOCKU313 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Vugge/dockingstation StarTech.com Manualer

Vugge/dockingstation Manualer

Nyeste Vugge/dockingstation Manualer

Vimar

Vimar 20585 Manual

15 December 2024
Vimar

Vimar 19585 Manual

15 December 2024
Denver

Denver BTL-350 Manual

5 Oktober 2024
Jam

Jam Thrill HX-P320 Manual

4 Oktober 2024
Pyle

Pyle PWPBT05BL Manual

4 Oktober 2024
Ewent

Ewent EW7018 Manual

4 Oktober 2024
Jam

Jam Splash Manual

4 Oktober 2024